2002 Peugeot 607 Dag gearbox

Notes
It is only possible to change from one gear
to another if the vehicle speed and engine
speed permit. If they do not, the vehicle will
operate temporarily in automatic mode.
When the vehicle is stationary or moving
very slowly, the gearbox automatically
selects gear M1.
Programmes S(sport) and
(snow) do not
operate in manual mode.
Operating abnormality
Any operating abnormality is
shown by illumination of this warn
ing light, accompanied by an audi
ble signal and the message 'Auto
matic gearbox faulty' on the
multifunction display.
In this situation the gearbox operates in
downgrade mode (locked in 3rd gear). You
may feel a substantial knock when selecting
reverse from Pto Rand from Nto R(this will
not cause any damage to the gearbox).
Do not exceed 60 mph (100 km/h).
Contact a PEUGEOT dealer as soon as
possible.
If the battery is flat and the
lever is in position P, it will
be impossible to change
to another position.
YOUR 607 IN DETAIL 123
Automatic operation
Automatic changing of the
four gears:
select function Din the gate.
The gearbox always selects the most
suitable gear according to the follow
ing parameters:
– the style of driving,
– the road profile,
– the vehicle load.
The gearbox is then operating in auto
adaptive mode, without any action on
your part.
WARNING
Never select function N when the vehi
cle is moving.
Never select functions Por Runless
the vehicle is stationary.
Never change betwen functions to
optimise braking on a slippery surface.
Notes
For immediate maximum acceleration
without touching the gear lever, press
the accelerator pedal down as far as it
will go (kickdown). The gearbox will
automatically change down or main
tain the gear selected until maximum
engine speed is reached.
When the brake is applied, the gear
box will automatically change down in
order to provide efficient engine brak
ing.
If you take your foot off the accelerator
suddenly, the gearbox will not change
to a higher gear for reasons of safety. Sport and snow programmes
In addition to the autoadaptive pro
gramme, there are two special pro
grammes.
The programme is displayed on the
instrument panel screen.
Sport programme
Press button
Sonce the vehicle has
been started and function Dselected.
The gearbox automatically favours
sporty driving and more dynamic
acceleration.
Snow programme
This programme improves starting
and drive when traction is poor.
Press button once the vehicle has
been started and function Dselected.
The gearbox adapts to driving on slip
pery roads.
Note: you can return to the autoadap
tive programme at any time.
Press button Sor again to switch
off the programme you are in.
Manual operation
Manual changing of the four gears:
select function Min the gate,
push the lever to the + sign to
change to a higher gear,
pull the lever to the sign to change
to a lower gear.
You can change from position D(dri
ving in automatic mode) to position M
(driving in manual mode) at any time.

EMERGENCY BRAKING
ASSISTANCE SYSTEM
In an emergency, this system
enables the optimum braking pres
sure to be reached more quickly,
thus reducing the stopping distance.
It is triggered according to the speed
of activation of the brake pedal. The
effect of this is a reduction in the
resistance of the pedal and an
increase in braking efficiency.
YOUR 607 IN DETAIL
124
ABS ANTILOCK BRAKING
SYSTEM
The ABS system with Electronic
Brake Force Distribution (EBFD)
increases the stability and manoevra
bility of your vehicle, particularly on
poor or slippery road surfaces.
Note:
when changing wheels (tyres
and rims), make sure that these are
approved.
The antilock braking system comes
into operation automatically when
there is a risk of wheel lock.
When this warning light
comes on, accompanied by
an audible signal and the
message 'Braking fault' , it
indicates that there is a mal
function of the electronic brake force
distribution, which can cause a loss
of control of the vehicle when
braking.
Stop immediately.
Contact a Peugeot dealer.
Normal operation of the ABS may
make itself felt by slight vibrations
of the brake pedal.
In emergency braking, press
very firmly without releasing
the pressure.
MANUAL GEARBOX
Reverse
To change to reverse gear, lift the
ring under the gear lever knob and
push the gear lever to the left then to
the front.
Reverse gear can only be
engaged when the vehicle is sta
tionary with the engine idling.

PRACTICAL INFORMATION
138
CHECK
...
Battery
At the start of winter, have your bat
tery checked by a PEUGEOT dealer.
Air filter and pollen filter
Have the filter elements replaced
regularly. If you drive in dusty con
ditions, change them twice as
often.
Particulate emission filter
Additive reservoir (Diesel
models)
It is essential the particulate emis
sion filter be maintained and the
additive reservoir be filled by a PEU
GEOT dealer, according to the man
ufacturer's servicing schedule.
Brake pads
Brake pad wear depends on the
style of driving, in particular for vehi
cles which are used in town, over
short distances . It may be neces
sary to check the thickness of the
pads, even between services. Handbrake
Where the handbrake travel is too
great or there is a reduction in the
performance of the system, the
handbrake should be adjusted, even
between services. Have the system
checked by a PEUGEOT dealer.
Manual gearbox
This does not need an oil change.
Check the level, according to the
manufacturer's servicing schedule.
Automatic gearbox
This does not need an oil change.
Have the level checked by a
PEUGEOT dealer, according to the
manufacturer's servicing schedule.
Oil filter
Change the filter regularly, in accor
dance with the servicing schedule.
Fuel supply cutoff
In a serious collision, a mechanism
prevents fuel from reaching the
engine.
To reestablish the fuel supply:
 press the red button on the angle
of the front righthand suspension
assembly, under the bonnet..
Only use products
approved by Automobiles
PEUGEOT.
To ensure best perfor
mance from components as
important as the power steering
and the braking system,
PEUGEOT selects and offers
quite specific products.

PRACTICAL INFORMATION
140
CHANGING A WHEEL
Park the vehicle on level, stable
and nonslippery ground.
Apply the handbrake, engage first
or reverse gear (position
Pfor the
automatic gearbox) and switch off
the ignition.
Access to the spare wheel and the
jack in the boot
Detach the luggage net.
Lift the boot carpet using the lifting
hook. Secure this hook behind the
boot seal. Tools available
The following tools are located in the
polystyrene holder in the centre of
the spare wheel:
1
Wheelbrace.
2 Centralising tool.
3 Wheelbrace extension.
4 Jack fitted with a system which
enables it to be folded or unfold
ed rapidly.
5 Removable towing eye.
6 Alloy wheel trim remover.
7 Trim cover tool. Removal
For vehicles with alloy wheels fit
ted with wheel trims, pull the
centre trim by using tool
6in one
of the holes.
Loosen the wheel bolts.
Take the jack from the tool kit and
fold it by pressing the ends A.

PRACTICAL INFORMATION 141
Fold the jack by pressing at the
ends
Aand place it in one of the
four locations Eunderneath the
vehicle (the nearest one to the
wheel to be changed).
Extend the jack, first by hand, pul
ling the ends Athen using wheel
brace 1and the extension 3.
Remove a wheel bolt at the top
and fit the centralising tool 2in its
place.
Unscrew the other bolts and
remove the wheel.
Fitting a wheel
Position the wheel using the cen
tralising tool to assist you.
Tighten the bolts by hand and
remove the centralising tool.
Partly tighten the bolts using the
wheelbrace.
Fold the jack and remove it.
Fully tighten the bolts using the
wheelbrace.
Replace the wheel trim.
Put the tool holder back in posi
tion. This helps to keep the boot
floor in its correct position, to pre
vent any deformation of the floor
when loaded.
Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of impact. For your safety, always
change the wheel:
– on level, stable, nonslippery
ground,
– with the handbrake applied,
– with first or reverse gear engaged (position Pfor the
automatic gearbox),
Never go underneath a vehicle
which is supported only by a
jack (use a ramp).
After changing the wheel:
– have the tightening of the bolts and the tyre pressure checked
by a PEUGEOT dealer as soon
as possible.
– have the punctured wheel repaired and refit it to the vehi
cle as soon as possible.
Tyres fitted with the Tyre Under
Inflation Detection System.
These wheels have a pressure
sensor. Have them repaired by a
PEUGEOT dealer.

Fuse N° RatingFunctions
10* 20 AAutomatic headlamp lighting control unit.
11* 70 A Builtin systems interface.
12* 70 A Ignition supply (+ve accessories / ignition controlled +ve).
13* 20 A Automatic headlamp lighting control unit.
14 15 A Double injection relay supply.
15* Not used.
16* Not used.
17* 30 A ESP hydraulic unit.
18 30 A Ignition supply (+ starter).
19 20 A Variable suspension control unit.
20 10 A Fan unit relay Cruise control safety switch Manual gearbox clut ch switch
Manual gearbox reversing lights switch or automatic gearbox multifu nction switch
Automatic headlamp lighting control unit Vehicle speed senso r Coolant level sensor
Water in diesel sensor Power switch control unit relay.
21 5 A Automatic gearbox control unit Automatic gearbox multifunction sw itch.
22 25 A ESP control unit.
23 15 A Diesel heating.
24 5 A Engine management control unit – Dual control control unit.
25 10 A Fuel pump.
26 30 A Driver's seat memory control unit.
27 25 A Double injection relay supply.
28 10 A Throttle housing deicing resistor, Intake pilot solenoid val ve Flow meter Piston deactivator
injectionpump Oil heating.
29 30 A Air pump, diesel additive control unit Diesel additive inje ctor.
30 Cannot be used.
31 5 A Automatic gearbox shift lock.
32 10 A ESP or ABS control unit.
33 15 A Automatic gearbox control unit Automatic gearbox multifunction sw itch (except reversing lights) Automatic
gearbox sequential control.
34 5 A Oxygen sensors Exhaust gas recirculation solenoid valve, Exhaust gas reci rculation throttle solenoid valve
Turbo pressure regulation solenoid valve..
PRACTICAL INFORMATION 149

PRACTICAL INFORMATION 153
Special features of the
automatic gearbox
When towing with four wheels on the
ground, the following rules must be
obeyed:
– lever in position
N,
– tow the vehicle at less than 30 mph (50 km/h) over a maximum
distance of 30 miles (50 km).
– do not add oil to the gearbox.
TOWING YOUR VEHICLE
Without lifting (4 wheels on the road)
You should always use a tow bar.
The towing eye is inside the spare wheel.
From the front:
 Unclip the bottom of the cover, using the flat part of th e towing eye.
 Screw in the towing eye until it locks.
From the rear:  Unclip the top of the cover using the flat part of the to wing eye,
 Screw in the towing eye until it locks.
Lifting (2 wheels only on the road )
It is preferable to raise the vehicle by the wheels.
Never use the radiator crossmember.
ParticularitŽs de la bo”te de vitesses automatique
When towing with the
engine switched off,
there is no braking assis
tance.

156TECHNICAL DATA
PETROL ENGINES
MODELS:
Model codes 9DRFNB 9D3FZB 9D3FZE 9DXFXB 9DXFXE
ENGINES
Capacity (cm 3
)
Bore x stroke (mm)
Number of valves
Max. power: EU standard (KW)
Max. power at engine speed (rpm)
Max. torque: EU standard (Nm)
Max. torque at engine speed (rpm)
Fuel
Catalytic converter
Electronic injection
GEARBOX
CAPACITIES (in litres)
Engine (with filter replacement)
Gearbox Final drive 2 litre 16V 2.2 litre 16V 24V V6 Injection
1997 2230 2946
85x88 86x96 87x82.6 16 16 24
100 116 152
6000 5650 6000
190 217 285
4100 3900 3750
Unleaded* Unleaded Unleaded Yes* Yes YesYe s Ye s Ye s
Manual Manual Automatic Manual Automatic
(5speed) (5speed) (4speed) (5speed) (4speed)
4.25 4.25 4.751.9 1.85 8 1.85 8
* According to country.