2002 Peugeot 306 Dag driver seat adjustment

ADJUSTING THE FRONT
SEATS (3-door) 1Forwards-backwards adjust- ment.
2 Seat back angle adjustment.
3 Drivers seat height adjustment:pull the telescopic handle andpivot it.
4 Lumbar adjustment.
5 Access to rear seats. ADJUSTING THE FRONT
SEATS (4/5-door and estate) 1
Forwards-backwards adjust- ment.
2 Seat back angle adjustment.
3 Drivers seat height adjustment:pull the telescopic handle andpivot it.
4 Lumbar adjustment.
YOUR 306 AT A GLANCE
10
HEAD RESTRAINTS - Height adjustment: slide them.
- Adjusting the angle: tilt them.
To remove the head restraint, posi- tion it at maximum height andpress the tab.
32
1
4
2
5
3
1
4
838383

1
2
101
YOUR 306 IN DETAIL
Adjusting the height of the steering wheel Push the handle to unlock the steering wheel. Adjust the steering wheel to the desired height and pull the handle tolock it into position.1 - Lighting rheostat* Dim or brighten the instru- ment panel lighting by turning
the knob. This only operates
when the exterior lights are on. 2 - Headlamp heightadjustment*
Depending on the vehicleÕs load, it is advisable to adjust
the headlamp beam. 0 - 1 or 2 people in the front seats.
Ð - 3 people.
1 - 5 people.
2 - 5 people + maximum authorised
load.
3 - Driver + maximum authorised
load.
This adjustment can only be carried out with the lighting stalk in thedipped/main beam headlamps posi-tion. Initial setting: 0.
* According to specification.

64
5
2
1
3
YOUR 306 IN DETAIL 83
SEATS
1 - Forward-backwards adjustment Lift the lever and slide the seat forwards or backwards.
2 - Adjusting the driver Õs seat height
Pull the telescopic handle forwards andpivot it up or down.
3 - Adjusting the seat back angle Turrn the knob to obtain the best angle(4/5-door and estate). Lift the handle to obtain the best angle (3-door).
4 - Lumbar adjustment* Turn the knob.
5 - Access to the rear seats (3-door) Lift the handle, tilt the seat-back andslide the seat forwards. When it slidesback, the seat will return to its originalposition.
6 - Head restraint Height adjustment: slide the headrestraint. Adjustment is correct when the top of the head restraint is level with the top of thehead. The angle of the head restraint can also be adjusted.
To remove the head restraint, press the tab and pull the head restraint upwards.
* According to specification.