2002 Peugeot 306 Break Dag maintenance

AAAA
AAAAA
C
C
MAINTENANCE OF YOUR 306
22
THE MAINTENANCE CYCLE FOR YOUR 306 DIESEL (INDIRECT INJECTION NON-TURBO)
Service every 10,000 miles (15 000 km) or every 2 years
MILES (KM) 10,000 (15 000) 20,000 (30 000) 30,000 (45 000) 40,000 (60 000) 50,000 (75 000)
1st Service at 6,000 miles (10 000 km)* or 6 months*
The validity of the Warranty depends on this service.
60,000 (90 000) 70,000 (105 000) 80,000 (120 000) 90,000 (135 000) 100,000 (150 000) 110,000 (165 000)
+ timing belt replacement
* Whichever comes first
Brake fluid replacement every 2 years or every 40,000 (60 000km).
These operations are carried out with synthetic based oil; Fuel Economy oil or
synthetic oil can also be used. Intermediate visit

MAINTENANCE OF YOUR 30623
PEUGEOT SERVICING LEVELS A AND C
: All driving conditions : Arduous conditions
Level
Operations Description of operations for 1st serviceFirst serviceACIntermediate visit
DRAIN AND REFILL- Engine oil- Bleed fuel filter (diesel)- Oil filter.- Fuel filter (Petrol).REPLACEMENT- Fuel filter element (Diesel).- Air filter element.- Spark plugs (Petrol).- Engine oil (check + top up).- Manual gearbox oil (check + top up).- Battery (check + top up) if cap is removableLEVEL- Front/rear windscreen wash (check + top up).- Coolant (check + top up).- Brake fluid (check + top up).- Power steering fluid (check + top up according to specification).- Operation of lights and indicators.- Condition of glass, headlamp and light lenses and mirrors.- Horn.- Windscreen washer jets.- Condition of wiper blades.- Condition and tension of ancillary drive belts.- Handbrake.- Condition of hydraulic circuits (hoses and covers), check for leaks.CHECK- Condition of rubber boots and gaiters.- Brake pad wear. - Play in hubs, rods, ball joints, flexible mountings- Shock absorbers for leaks- Rear drum brake lining wear- Condition and pressure of tyres (including spare wheel).- Emission control check according to current legislation (Petrol).- Smoke opacity (Diesel).- Pollen filter check (according to specification). - Visual check of the whole vehicle by a PEUGEOT dealer.
SERVICE- Courtesy vehicle
ROAD TEST

0W203040
50
20W
15W
10W
5W
25
MAINTENANCE OF YOUR 306
Recommendations for approved lubricants
The oils which appear in the tableopposite are suitable for most purposes. The diagram opposite states the optimum range of viscosity depen-ding on the temperatures at which theoils are to be used. It is also possible to use synthetic oils of Ôsuperior qualityÕ. In the absence of semi-synthetic or
synthetic oils, oils of API SH/SJquality (for petrol engines), or CD/CFquality (for diesel engines) may beused by following the ÔArduous Condi-
tionsÕ maintenance schedule whichspecifies shorter intervals. Do not hesitate to ask for advice from
a PEUGEOT dealer to maintaindriving pleasure and to minimise themaintenance cost of your vehicle. For countries outside Europe, please
contact a local PEUGEOT dealer.
ESSENTIAL ESSENTIAL
Manual gearbox ESSO GEAR OIL BVTOTAL TRANSMISSION BV75W 80 PR 9736.41 75W 80
Automatic ESSENTIAL
gearbox AL4 ATF 4HP20-AL4 PR 9736.22
Automatic ESSO ATF D TOTAL FLUIDE AT42
gearbox PR 9730.944 HP-14
Power steering ESSO ATF D TOTAL FLUIDE AT42 PR 9730.94
Brake fluid PEUGEOT DOT4 Coolant PROCOR TM108 / GLYSANTIN G33 or REVKOGEL 2000
ESSENTIAL Protection to minus 35 ¡C
Other approved products

1
9
8
7
6
5
432
26
MAINTENANCE OF YOUR 306
1
Power steering fluid reservoir*.
2 Engine oil filler cap.
3 Air filter. 4
Brake fluid reservoir.
5 Battery.
6 Engine oil dipstick. 7
Oil filter.
8 Coolant reservoir.
9 Screenwash reservoir.
* According to specification.
1.4 litre and 1.6 litre petrol engine

1
9
7
6
5
4
8
23
1.8 litre and 2 litre 16V petrol engine
27
MAINTENANCE OF YOUR 306
1
Power steering fluid reservoir*.
2 Engine oil filler cap.
3 Engine oil dipstick. 4
Brake fluid reservoir.
5 Battery.
6 Air filter. 7
Oil filter.
8 Coolant reservoir.
9 Screenwash reservoir.
* According to specification.

1
9
5
3
2
4
8
6
7
MAINTENANCE OF YOUR 306
28
1
Power steering fluid reservoir*.
2 Engine oil dipstick.
3 Engine oil filler cap. 4
Brake fluid reservoir.
5 Battery.
6 Air filter. 7
Oil filter.
8 Coolant reservoir.
9 Screenwash reservoir.
* According to specification.
1.9 litre diesel engine

1
9
5
3
2
4
8
7
6
MAINTENANCE OF YOUR 30629
1
Power steering fluid reservoir*.
2 Engine oil dipstick.
3 Engine oil filler cap. 4
Brake fluid reservoir.
5 Battery.
6 Air filter. 7
Oil filter.
8 Coolant reservoir.
9 Screenwash reservoir.
* According to specification.
2 litre HDI turbo diesel engine

A
C
B
A
B
C
MAINTENANCE OF YOUR 306
30
CHECKING THE LEVELS Engine Checking the oil level Check the level regularly and top up between changes
(maximum
consumption is 0.5 litres per 600 miles (1,000 km). The oil level should be checked with the vehicle level, engine cold. There are two marks on the dipstick:
A= maximum.
B = minimum. Oil change:
according to the manu-
facturerÕs servicing schedule.
Ð Dipstick. Never fill past the maximum mark A.
Ð Oil level gauge on the instrument panel.
Viscosity selectionIn all cases, the oil selected must meet the manufacturer's require-ments. Oil filter Change the filter regularly in accor- dance with the maintenance schedule. Used oil Prevent used oil from coming into pro- longed contact with the skin. Do not dispose of used oil into drains or into the ground.
To maintain the reliability of engines and emission control systems, the useof additives in the engine oil is prohi-bited. Brake fluid reservoir Checking the brake and clutch fluid level :
Ð The level should always be above
the DANGER mark on the reservoir.
Ð If the level drops substantially, contact a PEUGEOT dealer imme-
diately.
Fluid change
Ð must be carried out according to the manufacturerÕs schedule.
Ð use fluids approved by the manu- facturer, which fulfil DOT4 stan- dards.
Coolant reservoir Use the fluid approved by the manu-
facturer. When the engine is warm, the tempe- rature of the coolant is controlled bythe engine fan: because this fan canoperate with the ignition key removed,and because the cooling system ispressurised, wait for at least one hourafter the engine has stopped beforecarrying out any work.
If necessary, in a breakdown, slacken the cap to the first notch to release thepressure to prevent any risk of scal-ding. When the pressure has droppedremove the cap and top up the level.
Item C: Dipstick guide.