2002 Mercury Villager CD player

[x] Cancel search: CD player

Page 34 of 256

Mercury Villager 2002  Owners Manuals Tune adjust
The tune control works in radio or CD changer mode (if equipped).
Tune adjust in radio mode
•Press
to move to the next
frequency down the band
(whether or not a listenable
station is loc

Page 35 of 256

Mercury Villager 2002  Owners Manuals into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ball point pens

Page 39 of 256

Mercury Villager 2002  Owners Manuals SUPER SOUND AM/FM STEREO/CASSETTE/SINGLE CD PLAYER
(CD CHANGER COMPATIBLE)
Your audio system is equipped with selective lighting, a unique lighting
strategy. This lighting feature is operable when the

Page 46 of 256

Mercury Villager 2002  Owners Manuals Tape/CD/CD changer (if equipped) select
•To begin tape play (with a tape
loaded into the audio system)
while in the radio or CD mode,
press the TAPE control. Press the
button during rewind or fast f

Page 51 of 256

Mercury Villager 2002  Owners Manuals ADJUSTING THE VOLUME
Press the + control to increase
volume.
Press the—control to decrease
volume.
From the RSC, the speaker volume
can not be set higher than the
current volume radio setting. Once

Page 55 of 256

Mercury Villager 2002  Owners Manuals The CD magazine may be inserted or ejected with the radio power on or
off.
ONLY use the magazine type supplied with the CD changer, other types
will damage the unit.
Keep the CD changer door closed. C

Page 56 of 256

Mercury Villager 2002  Owners Manuals CD units are designed to play commercially pressed 12 cm (4.75
in) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function corre

Page 103 of 256

Mercury Villager 2002  Owners Manuals POSITIVE RETENTION FLOOR MAT
Position the floor mat so that the
eyelet is over the pointed end of the
retention post. Make sure that the
mat does not interfere with the
operation of the accelerator or