2002 MERCEDES-BENZ CLK430 CABRIOLET warning light

232 Malfunction and indicator lamps
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
Telescoping steering column – indicator lamp
The indicator lamp in the instrument cluster
comes on with the electronic key in steering
lock position 2 and should go out with the
engine running.
If the indicator lamp does not go out after starting the
engine, the adjustable steering column is not properly
locked.
For locking the adjustable telescoping steering column,
see page 77.
Seat belt warning lamp
With the electronic key in steering lock
pos ition 2 , t he s eat belt warn ing lamp com es
on and a warning sounds for approx.
6 seconds if the driver’s seat belt is not fastened.Malfunction and indicator lamps in the
center console
AIRBAG OFF indicator lamp
The 7 indicator lamp will light up for approx.
6 seconds when you turn the electronic key in steering
lock to position 1 or 2.
The 7 indicator lamp stays lit as long as a
BabySmart
TM compatible child seat is properly installed
on the front passenger seat. It indicates that the front
passenger airbag is switched off.
See page 64 for BabySmart
TM deactivation system.
BabySmart
TM is a trademark of Siemens Automotive Corp.
J_A208.book Seite 232 Donnerstag, 31. Mai 2001 9:35 09

233 Malfunction and indicator lamps
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care IndexRoll bar warning lamp
The roll bar warning lamp is located in the roll bar
switch in the center console. Roll bar switch see
page 52.
With the electronic key in steering lock position 2, the
roll bar warning lamp comes on and should go out with
the engine running.
With the engine running and the roll bar lowered, the
warning lamp in the roll bar switch will blink for
approx. 15 seconds. The blinking is reminding you to
raise the roll bar if the rear passenger seats are
occupied.
Note:
Have the roll bar system checked at your authorized
Mercedes-Benz Center as soon as possible.
Wa r n i n g !
The BabySmart
TM airbag deactivation system will
ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmart
TM compatible.
Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system.Follow the manufacturer’s instructions for
installation of special child seats.The passenger side front airbag will not deploy
only if the 7 indicator lamp remains
illuminated.Please be sure to check the indicator every time
you use the special system child seat.Should the light go out while the restraint is
installed, please check installation. If the light
remains out, do not use the BabySmart
TM restraint
to transport children on the front passenger seat
until the system has been repaired.
Wa r n i n g !
If the warning lamp does not go out after starting
the engine, or if it comes on while driving, then the
roll bar system is not operating properly and may
not activate in an accident. In this case, raise the
roll bar manually (see page 53) before continuing
to drive.
J_A208.book Seite 233 Donnerstag, 31. Mai 2001 9:35 09

234 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
Malfunction and warning messages in the
multifunction display
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
These messages can be cleared from the instrument
cluster by:
•using the J button on the instrument cluster, or
•pressing buttonj, k, è or ÿ on the
multifunction steering wheel.
They are then stored in the malfunction message
memory. See page 104.Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Temporary messages such as “SWITCH OFF LIGHTS”
will not be stored in the malfunction message memory.
Wa r n i n g !
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
J_A208.book Seite 234 Donnerstag, 31. Mai 2001 9:35 09

242 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
LIGHTING SYSTEMWhen the message appears after starting the engine, or
if it comes on while driving, this indicates a failure in
the parking lamp, taillamp, stop lamp, or low beam
headlamp. See page 280 for instructions on replacing
bulbs.
If an exterior lamp fails, the message will appear only
when that lamp is switched on.
If a brake lamp fails, the message will appear when
applying the brake and stays on until the engine is
turned off.
Note:
If additional lighting is installed (e.g. auxiliary
headlamps etc.) be certain to connect into the fuse
before the failure indicator monitoring unit order to
avoid damaging the system.
Line 1 Line 2
LAMP DEFECTIVE CHECK LAMPS!
DISPLAY DEFECTIVE VISIT WORKSHOP!
J_A208.book Seite 242 Donnerstag, 31. Mai 2001 9:35 09

243 Malfunction and warning messages
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index LIGHT SENSOR
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS!” appears in the multifunction indicator if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.STEER. WHEEL ADJUST.
For locking the adjustable telescoping steering column,
see page 77.
Line 1 Line 2
STEER. WHEEL ADJUST.
J_A208.book Seite 243 Donnerstag, 31. Mai 2001 9:35 09

275 Jump starting
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index Proceed as follows:
1. Position the vehicle with the charged battery so that
the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.
2. On both vehicles:
•Turn off engine and all lights and accessories,
except hazard warning flashers or work lights.
•Apply parking brake and shift selector lever to
position “P”.
Important!
3. Clamp one end of the first jumper cable to the
positive (+) under hood terminal of the discharged
battery and the other end to the positive (+) terminal
of the charged battery. Make sure the cable clamps
do not touch any other metal parts.
4. Clamp one end of the second jumper cable to the
grounded negative (–) terminal of the charged
battery and the final connection to the negative (–)
terminal (2) of the discharged battery.Important!
5. Start engine of the vehicle with the charged battery
and run at high idle. Make sure the cables are not
on or near pulleys, fans, or other parts that move
when the engine is started. Allow the discharged
battery to charge for a few minutes. Start engine of
the disabled vehicle in the usual manner.
6. After the engine has started, remove jumper cables
by exactly reversing the above installation
sequence, starting with the last connection made
first. When removing each clamp, make sure that it
does not touch any other metal while the other end
is still attached.
Notes:
If engine does not run after several unsuccessful
starting attempts, have it checked at the nearest
authorized Mercedes-Benz Center.
Excessive unburned fuel may damage the catalytic
converter.
J_A208.book Seite 275 Donnerstag, 31. Mai 2001 9:35 09

331 Index
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
HHazard warning flasher switch ....................................119
Head restraints
Front ............................................................................. 51
Rear ............................................................................... 52
Removal ........................................................................ 51
Headlamp cleaning system ...........................................116
Headlights ........................................................................114
Heated seats ..................................................................... 56
High beams
See Combination switch ...........................................117
Hood ................................................................................. 254IIdentification labels ........................................................311
Illuminated vanity mirrors ........................................... 150
Indicator lamps in the instrument cluster ................... 84
Individual settings ......................................................... 106
Infant and child restraint systems ................................ 75
Information call
See Tele Aid ............................................................... 187
Instrument cluster ........................................................... 82
Activating display ....................................................... 85Indicator lamps ............................................................ 84
Instrument lamps ............................................................. 85
Instruments and controls ............................................... 18
Interior
General notes ............................................................. 151
Interior lighting .............................................................. 149
JJump starting .................................................................. 274KKeys, changing battery ................................................. 288
Keys, vehicle .....................................................................24LLamps, exterior
Fog lamps ................................................................... 114
Headlamp, adjusting ................................................ 285
Headlamps ...................... 114, 242, 243, 281, 285, 305
Low and high beam ........................................... 117, 282
Parking lamps ................................................... 114, 282
J_A208.book Seite 331 Donnerstag, 31. Mai 2001 9:35 09

332 Index
Technical
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
Replacing bulbs ......................................................... 280
Side marker lamp, front ........................................... 284
Standing lamps ..................................................114, 282
Taillamp assemblies ......................................... 114, 283
Turn signal lamps ............................................. 117, 282
Layout of poly-V-belt drive ............................................ 312
LIGHT SENSOR - malfunction
and warning messages ............................................ 243
Lighter ............................................................................. 155
LIGHTING SYSTEM - malfunction
and warning messages ............................................ 242
Limp home mode (Automatic transmission) ............. 203
Locking and unlocking ................................................... 29
Low beams
See Exterior lamps ....................................................280
Low engine coolant level warning .............................. 240
Luggage cover .................................................................250
MMaintenance ................................................................... 179
Malfunction and indicator lamps
in the instrument cluster .........................................228
Malfunction and warning messages ...........................234
ABS-SYSTEM ............................................................. 237
BATTERY/ALTERNATOR .......................................... 236BRAKE ASSIST ......................................................... 237
BRAKE FLUID ........................................................... 238
BRAKE LINING WEAR ............................................ 238
COOLANT (coolant level) ........................................ 240
COOLANT TEMP. (coolant temperature) ............... 241
DISPLAY DEFECTIVE
(engine control unit) ........................................... 235
DISPLAY DEFECTIVE
(several systems) ................................................. 235
ELEC. STABIL. PROG. .............................................. 245
ENGINE FAN ............................................................. 239
ENGINE OIL LEVEL ................................................. 244
LIGHT SENSOR ......................................................... 243
LIGHTING SYSTEM .................................................. 242
PARKING BRAKE ..................................................... 239
REMOVE KEY ........................................................... 245
STEER. WHEEL ADJUST. ......................................... 243
TELE AID ................................................................... 247
WASHER FLUID ........................................................ 246
Malfunction/warning message memory .................... 104
Manual operation of soft top ........................................ 291
Mechanical keys ........................................................ 25, 32
Memory
Recalling ................................................................ 49, 80
Storing ...........................................................................48
Mirror, exterior, adjusting .............................................. 79
J_A208.book Seite 332 Donnerstag, 31. Mai 2001 9:35 09