402 Fuels, coolants, lubricants etc. - capacities
Te ch n i c a l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
Premium unleaded gasoline
Caution!
To maintain the engine’s durability and performance,
premium unleaded gasoline must be used. If premium
unleaded is not available and low octane fuel is used,
follow these precautions:
•have the fuel tank filled only partially with unleaded
regular and fill up with premium unleaded as soon
as possible,
•avoid full throttle driving and abrupt acceleration,
•do not exceed an engine speed of 3000 rpm, if the
vehicle is loaded with a light load such as two
persons and no luggage,
•do not exceed
2/3 of maximum accelerator pedal
position, if the vehicle is fully loaded or operating in
mountainous terrain.Fuel requirements
Use only Premium unleaded meeting ASTM
standard D 439:
The octane number (posted at the pump) must be
91 min. It is an average of both the Research (R) octane
number and the Motor (M) octane number: (R+M)/2).
This is also known as ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates such as
Ethanol, IPA, IBA and TBA can be used provided the
ratio of any one of these oxygenates to gasoline does not
exceed 10%, MTBE not to exceed 15%.
The ratio of Methanol to gasoline must not exceed 3%
plus additional cosolvents.
Using mixtures of Ethanol and Methanol is not allowed.
Gasohol, which contains 10% Ethanol and 90% unleaded
gasoline, can be used.
These blends must also meet all other fuel requirements
such as resistance to spark knock, boiling range, vapor
pressure etc..
J_OM_215.book Seite 402 Mittwoch, 30. Mai 2001 2:01 14
403 Fuels, coolants, lubricants etc. - capacities
Te ch n i c a l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index Gasoline additives
A major concern among engine manufacturers is carbon
build up caused by gasoline. Mercedes-Benz
recommends the use of only quality gasoline containing
additives that prevent the build up of carbon deposits.
After an extended period of using fuels without such
ad ditives , car bon d ep osits c an bui ld up esp eci ally on t he
intake valves and in the combustion area, leading to
engine performance problems such as:
•warm-up hesitation,
•unstable idle,
•knocking/pinging,
•misfire,
•power loss.
Do not blend other specific fuel additives with fuel.
They only result in unnecessary cost, and may be
harmful to the engine operation.
Damage or malfunctions resulting from poor fuel
quality or from blending specific fuel additives are not
covered by the Mercedes-Benz Limited Warranty.Coolants
The engine coolant is a mixture of water and
anticorrosion/antifreeze, which provides:
•corrosion protection,
•freeze protection,
•boiling protection (by increasing the boiling point).
The cooling system was filled at the factory with a
coolant providing freeze protection to approximately
-22
°F (-30
°C) and corrosion protection.
If the antifreeze mixture is effective to -22
°F (-30
°C), the
boiling point of the coolant in the pressurized cooling
system is reached at approximately 266
°F (130
°C).
The coolant solution must be used year round to provide
the necessary corrosion protection and increase in the
boil-over protection. You should have it replaced every
3years.
To provide the important corrosion protection, the
solution must be at least 45% anticorrosion/antifreeze
(equals a freeze protection to approx. - 22
°F [-30
°C]). If
you use a solution that is more than 55% anticorrosion/
antifreeze (freeze protection to approx. - 49
°F [-45
°C]),
J_OM_215.book Seite 403 Mittwoch, 30. Mai 2001 2:01 14
404 Fuels, coolants, lubricants etc. - capacities
Te ch n i c a l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car care Index
the engine temperature will increase due to the lower
heat transfer capability of the solution. Therefore, do not
use more than this amount of anticorrosion/antifreeze.
If the coolant level is low, water and MB anticorrosion/
antifreeze should be used to bring it up to the proper
level (have cooling system checked for signs of leakage).
The water in the cooling system must meet minimum
requirements, which are usually satisfied by normal
drinking water. If you are not sure about the water
quality, consult your authorized Mercedes-Benz Center.
Anticorrosion/antifreeze
Your vehic le con tain s a n umbe r o f alumi nium parts. The
use of aluminium components in motor vehicle engines
necessitates that anticorrosion/antifreeze coolant used
in such engines be specifically formulated to protect the
aluminium parts. (Failure to use such anticorrosion/
antifreeze coolant will result in a significantly
shortened service life.)
Therefore the following product is strongly
recommended for use in your vehicle: Mercedes-Benz
anticorrosion/antifreeze agent.Before the start of the winter season (or once a year in
the hot southern regions), you should have the
anticorrosion/antifreeze concentration checked. The
coolant is also regularly checked each time you bring
your vehicle to your authorized Mercedes-Benz Center
for service.
Anticorrosion/antifreeze quantity
Model Approx. freeze protection
– 35
°F
(– 37°C)– 49
°F
(– 45°C)
CL 500,
CL 55 AMG6.1 US qt
(5.75 l)6.7 US qt
(6.3 l)
CL 600 6.3 US qt
(6.0 l)7. 0 U S q t
(6.6 l)
J_OM_215.book Seite 404 Mittwoch, 30. Mai 2001 2:01 14
408 Index
Te ch n i c a l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
Front center console
storage compartment ventilation ...................... 180
MAXCOOL .................................................................. 172
Rear window defroster ............................................. 181
Residual engine heat utilization ............................ 179
Special settings ......................................................... 174
Switching on and off ................................................ 180
Windows fogged on the inside ................................ 175
Windows fogged on the outside ...............................176
Automatic maximum cooling ....................................... 172
Automatic transmission ...............................................235
Emergency operation ...............................................243
Fluid level ...................................................................338
Program mode selector switch ............................... 242
Selector lever position ..............................................238
BBabySmart
TM airbag deactivation system ..................... 88
Self-test ......................................................................... 89
Backrest ............................................................................. 72
BAS (Brake assist system) ............................................ 275
Battery .............................................................................352
Battery recycling ....................................................... 354BATTERY/ALTERNATOR -
malfunction and warning messages ..................... 305
Block heater ................................................................... 253
BRAKE ASSIST -
malfunction and warning messages ..................... 306
Brake assist system (BAS) ........................................... 275
Brake fluid ........................................... 246, 298, 399, 401
BRAKE FLUID -
malfunction and warning messages ..................... 307
Brake pad wear .............................................................. 307
BRAKE PAD WEAR -
malfunction and warning messages ..................... 307
Brake warning lamp ..................................................... 298
Brake fluid low ......................................................... 298
Brakes ...................................................244, 246, 275, 279
Bulbs
See Replacing bulbs ................................................. 360
CCapacities
Fuels, coolants, lubricants etc. .............................. 399
Card, KEYLESS-GO ..........................................................28
Cargo tie-down hooks ................................................... 206
Catalytic converter ........................................................ 226
Center console .................................................................. 24
J_OM_215.book Seite 408 Mittwoch, 30. Mai 2001 2:01 14
412 Index
Te ch n i c a l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
FFastening seat belts ......................................................... 85
First aid kit ..................................................................... 330
Flat tire
See Changing wheels ...............................................346
Flexible service system (FSS) ...................................... 150
Footwell lighting ............................................................ 190
Front airbags .................................................................... 92
Front center console
storage compartment ventilation ........................... 180
Front seat adjustment ..................................................... 67
Fuel
Gasoline additives ....................................................403
Premium unleaded gasoline ................. 292, 400, 402
Fuel cap placement warning
See CHECK ENGINE
malfunction indicator lamp ................................ 296
Fuel filler flap, manual release ................................... 374
Fuel requirements ......................................................... 402
Fuel reserve warning ....................................................299
Fuels, coolants, lubricants etc. - capacities ...............399
Fuse box .......................................................................... 331
Fuses, electrical ............................................................. 331
GGarage door opener ...................................................... 208
Gasoline
Additives .................................................................... 403
Fuel requirements ................................................... 402
Premium unleaded .................................................. 402
General notes on the central locking system .............. 32
Global locking
See Central locking system ....................................... 33
Glove box ......................................................................... 194HHazard warning flasher switch ................................... 167
Head restraints
Power head restraints, rear ....................................... 81
Head restraints, front seats
Removal and installation ........................................... 71
Headlamp adjustment .................................................. 360
Headlamp cleaning system ........................................... 163
Headlamp mode .............................................................. 160
Headlights ....................................................................... 159
Heated seats ...................................................................... 76
High beams
See combination switch ........................................... 164
J_OM_215.book Seite 412 Mittwoch, 30. Mai 2001 2:01 14