Quick Tips Mazda 2002 Tribute page 20
page 1
Revised January 14, 2002
MAINTENANCE SCHEDULE
Maintenance notes
Rotate tires every 3,750 miles
A.Change: Engine oil/replace
oil filter
B.Inspect: Drive belts, fuel lines
and hoses, brake lines and
hoses, disc and drum brakes,
steering operation and linkages,
front and rear suspension ball
joints, driveshaft dust boots,
chassis and body bolts, exhaust
system heat shields, cooling
system, refrigerant amount
Lubricate: All locks and hinges
Replace: Air filter, fuel filter
C.Inspect: Engine valve
clearance (2.0L), hoses and
tubes for emission system
D.Replace: Engine timing
belt (2.0L)
†
E.Replace: PCV valve (2.0L)†
* Special operating conditions
† See Owner’s Manual
This Quick Tips®guide is provided
by Mazda North American
Operations to make your Mazda
ownership experience more
convenient. It is not intended to
replace your Owner’s Manual.
If you have any questions about
your vehicle, you are invited to
contact your local dealer.
Or if you need additional help,
feel free to call our
Customer Assistance Center
at 1-800-222-5500
Monday through Friday,
9 a.m.- 4 :45 p.m., Pacific
9 a.m.-5:45 p.m., Eastern/Central
Tip: For additional service
intervals and complete details,
see Owner’s Manual
5,000 miles*
7,500 miles
15,000 miles
22,500 miles
30,000 miles
37,500 miles
45,000 miles
52,500 miles
60,000 miles
67,500 miles
75,000 miles
82,500 miles
90,000 miles
D A
A A A B C E
A A A
A B
A
A A
A
95,000 milesA B©2002 Calcar, Quick Tips®is a trademark
of Calcar, made in USA 12/01 54.38M GL
Mazda North American Operations reserves
the right to change product specifications at
any time without incurring obligations.
Reference
Guide for
Controls and
Functions
2002
Quick Tips®
®
CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Fan control
To increase speed and flow:
Rotate knob clockwise
2. Air flow selections
= air to dash
= air to dash and floor
OFF = system off, no air flow
= air to floor
= air to floor and
windshield
= defrost, air to
windshield
3. Temperature selection
Cooler/warmer = rotate knob
counterclockwise/clockwiseAir conditioning system
MAX A/C= cooling with inside
air, air to dash only
A/C= cooling with outside air,
air to dash only
Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, air flow selector
knob to
Tips: To prevent moisture
buildup, never drive
with system off
To help prevent windshield
fogging in humid weather,
select DEF before starting
engine
Automatic transmission*
Gearshift must be in Park or
Neutral to start engine; it must
be in Park to remove ignition key
P = Park
To move gearshift from Park:
You must press firmly on the
brake pedal and the ignition
must be in the ON position
R = Reverse
Never engage Reverse when
vehicle is moving
N = Neutral
No gear is engaged; vehicle can
roll freely, even on a slight incline,
unless the brakes are appliedD (Overdrive)
For normal driving: Transmission
shifts through four forward gears
Tip: Torque converter lock-up
improves fuel economy and
can feel like an additional
gear
D (Overdrive Off)
Press the overdrive switch (1) to
disengage overdrive; an indicator
light on the instrument panel
will illuminate
2 = Second
Place the gearshift lever in second
when accelerating on slippery
roads or to provide additional
engine braking on downgrades
1 = First
Provides maximum engine braking
on steep downgrades4X4 system*
AUTO = Four-
wheel drive
Power at normal
speed to front/rear
axles as required for traction, 4X4
light off
LOCK = Full time power to
front/rear axles, 4X4 light on
To shift from 4X4 AUTO to
4X4 LOCK (any forward speed):
Press switch
To shift from 4X4 LOCK to 4X4
AUTO high (any forward speed):
Press switch
Climate
Controls
Transmission
Quick Tips Mazda 2002 Tribute page 12
page 13
Revised January 14, 2002
A/COFF
MAX
A/C
123
*Denotes optional equipment
1OFF/ON
Manual
transmission
Depress clutch
pedal completely
to start engine and
change gears
Stop vehicle completely before
shifting into reverse
LOCK
RADIO/CASSETTE/COMPACT DISC
Always check the Owner’s Manual for more operating information and safety features
Audio
Systems
Audio
Systems
Quick Tips Mazda 2002 Tribute page 16
page 17
Revised January 14, 2002
5. Scan
Press to briefly sample next
listenable selections, press
again to cancel; functions
in all modes
6. AM/FM
Press to alternate among
AM/FM1/FM2 frequency bands
7. CD slot
8. Tape: Press to play tape or
stop a tape during REW/FF
9. CD
Press to play CD
10. Eject: Press to eject tape/CD
Tip: Press and hold (9) until
beep to remove all discs
11. Clock
To set: Press (11) and hold
until it beeps and then press
(3) to adjust hours /minutes ;
press (11) again to set
1. Power/Volume
Press to turn on/off; rotate to
increase/decrease volume
2. Cassette door
3. Tune/Seek/Disk
Radio: Press to select
frequency up/down
Press and hold until
beep is heard, tunes to next
listenable station up/down
CD: Press to select
next/previous disc in
CD changer
4. Load
Single CD loading: Press button;
WAIT will appear, when IN
appears and CD door opens;
load CD
Multiple CD loading: Press
and hold LOAD until beep is
heard; when IN is displayed
load CD; when IN displays
again load next CD
/
/
/
12. Auto-memory
Automatically selects up to
6 strong radio stations
To set: Select AM/FM; press
and hold Auto-M until beep
is heard; to deactivate, press
Auto-M again
13. PRO
Press to play alternate side
of tape
14. Memory preset
buttons 1-6
To set: Press and hold until
beep is heard
15. Audio control
Adjust BASS/TREBLE/FADE/
BALANCE: Press AUDIO control
(15), 1/2/3/4 times; rotate (15)
right/left to increase/decrease
BASS/TREBLE output and
front/rear,left/right speaker
FADE/BALANCE16. TR/APC
Press to automatically advance
to next CD track
17. FF
Press to fast forward tape
18. RDM/BS
Press for random CD selection;
press again to disengage
19. RPT
Press to replay current
CD selection
20. Rewind
Press to rewind tape
21. TR/APC
Press to automatically replay
CD track
For additional audio systems,
see Owner’s Manual
AM/FM/Cassette Tape/CD Player/Changer*
SCAN AM/FM
6-DISC CD CHANGER
TAPE CD
LOAD
CLOCK
AUTO-M
1
PRO
TR/APC TR/APC
RPTPUSH
POWER VOLPUSH
AUDIO CONT
TUNE
SEEK
DISC
3 2
45REW
RDM/BSFF6
5
212019181716
6789
4
3
2
110
11
12
15
131014
Tip: Clean cassette mechanism after 10–12 hours or less
of use with Cassette Cleaning Cartridge
*Denotes optional equipment
