8-12
Maintenance and Care
Owner Maintenance
Form No. 8Q47-EA-01F
3. Replace the plug tightly after the oil
has thoroughly drained.
4. Fill the engine with new oil to the F
mark on the dipstick.
5. Securely replace the oil-filler cap.
6. Start the engine and inspect around the
drain plug for leaks.
7. Turn it off and wait 5 minutes for the
oil to return to the oil pan.
Check the oil level and fill to the F mark if
necessary.
Oil capacity (General reference only,
refer to Specifications section for
capacities.)
Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized Mazda
Dealer should do the work.
Inspecting Coolant Level
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year—at the beginning of the
winter season—and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the FULL and LOW
marks on the coolant reservoir when the
engine is cool.
NOTE
•The indicated engine oil capacities
are for general reference purposes
only. When adding or changing oil,
verify the engine oil level with the
oil dipstick.
•Use only specified engine oil (page
10-4).
Engine Coolant
Hot Engine:
A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Don’t
inspect the coolant system or add
coolant when the engine is hot.
WARNING
J76Y.book Page 12 Wednesday, March 27, 2002 5:04 PM
10-5
Specifications
Form No. 8Q47-EA-01F
Capacities
(Approximate Quantities)
Check oil and fluid levels with dipsticks or reservoir gauges.
Dimensions
*With license plate holder
We i g h t s
ItemUnit
L US qt Imp qt
Engine oil2.5 liter V6 DOHCWith oil filter
replacement4.0 4.2 3.5
Without oil filter
replacement3.7 3.9 3.3
Miller Cycle
Engine V6 DOHCWith oil filter
replacement4.1 4.3 3.6
Without oil filter
replacement3.8 4.0 3.4
Coolant 7.5 7.9 6.6
Automatic transaxle
fluid2.5 liter V6 DOHC 8.0 8.4 7.0
Miller Cycle Engine V6 DOHC 7.4 7.8 6.5
Fuel tank 68 18.0 (US gal) 15.0 (Imp gal)
Item mm (in)
Overall length
4,860 (191.3), 4,870 (191.7)
*
Overall width 1,770 (69.7)
Overall height 1,395 (54.9)
Front tread 1,520 (59.8)
Rear tread 1,520 (59.8)
Wheelbase 2,750 (108.3)
Item Weight
GVWR (Gross Vehicle Weight Rating) 1,985 kg (4,376 lb)
GAWR (Gross Axle Weight Rating)Front 1,116 kg (2,460 lb)
Rear 880 kg (1,940 lb)
J76Y.book Page 5 Wednesday, March 27, 2002 5:04 PM
