2002 MAZDA MODEL 626 maintenance schedule

8-13
Maintenance and Care
Owner Maintenance
Form No. 8Q50-EA-01G





Inspecting Coolant Level
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year —at the beginning of the
winter season—and before traveling
where temperatures may drop below
freezing.
Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.
The coolant should be at full in the
radiator and between the F and L marks
on the coolant reservoir when the engine
is cool. If it
’s at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Do not overfill.
If new coolant is required frequently,
consult an Authorized Mazda Dealer.





Changing Coolant
Change coolant according to Scheduled
Maintenance (page 8-3).
Engine Coolant
Hot Engine:A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Don ’t
inspect the coolant system or add
coolant when the engine is hot.
WARNING
2.0-liter engine
2.5-liter engine
Radiator coolant will damage paint.
Rinse it off quickly.
• Use only soft (demineralized) water
in the coolant mixture. Water that
contains minerals will cut down on
the coolant ’s effectiveness.
• Don ’t add only water. Always add a
proper coolant mixture.
• The engine has aluminum parts and
must be protected by an ethylene-
glycol-based coolant to prevent
corrosion and freezing.
• DO NOT USE alcohol or methanol
antifreeze. DO NOT MIX alcohol
or methanol with the coolant. This
could damage the cooling system.
• Don ’t use a solution that contains
more than 60 % antifreeze.
This would reduce effectiveness.
CAUTION
CAUTION
J94S.book Page 13 Saturday, June 23, 2001 1:04 PM

8-22
Maintenance and Care
Owner Maintenance
Form No. 8Q50-EA-01G
2. Lift off the air filter cover and remove the filter.
3. Wipe inside the air cleaner housing with a damp cloth.
4. Replace the filter.
5. Install in the reverse order of removal.
Replace the filter according to Scheduled
Maintenance (page 8-3). Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.





Replacing Windshield Wiper
Blades
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
Air filter cover
Air filter
Wiper Blades
Hot waxes applied by automatic car
washes have been known to affect the
cleanability of windows.
To prevent damage to the wiper blades,
don’t use gasoline, kerosene, paint
thinner, or other solvents on or near
them.
To prevent damage to the wiper arms
and other components, don ’t move the
wipers by hand.
CAUTION
CAUTION
CAUTION
J94S.book Page 22 Saturday, June 23, 2001 1:04 PM

11-4
Index
Form No. 8Q50-EA-01G
I
IgnitionKeys
............................................ 3-2
Switch
......................................... 5-2
Illuminated Entry System
................ 6-37
Immobilizer System
......................... 3-17
In Case of Emergency
........................ 7-1
Indicator Lights
................................ 5-23
Cruise set
.................................. 5-30
Headlight high-beam
................ 5-29
O/D OFF
................................... 5-30
Security
..................................... 5-29
TCS OFF
.................................. 5-30
Instrument Cluster
........................... 5-19
Interior Care
..................................... 8-45
Interior Lights
.................................. 6-37
J
Jump-Starting ................................... 7-12
K
Keyless Entry System ........................ 3-5
Keys
................................................... 3-2
L
Label Information ............................ 10-2
Lane-Change Signals
....................... 5-33
Light Bulbs Replacement
............................. 8-29
Specifications
........................... 10-6
Lighting Control
.............................. 5-32
Lubricant Quality
............................. 10-4
M
Maintenance ....................................... 8-1 Introduction
................................. 8-2
Owner maintenance
precautions
.................................. 8-8
Owner maintenance schedule
..... 8-7
Scheduled
.................................... 8-3
Manual Transaxle Operation
.............. 5-8
Map Lights
....................................... 6-37
Meters and Gauges
........................... 5-19
Mirrors Outside mirrors
......................... 3-21
Rearview mirror
........................ 3-22
Money-Saving Suggestions
................ 4-7
O
Odometer and Trip Meter ................ 5-20
Outside Mirrors
................................ 3-21
Overhead light
.................................. 6-37
Overheating
...................................... 7-10
Overloading
...................................... 4-11
P
Paint Damage ................................... 8-40
Parking Brake
..................................... 5-5
Parking in an Emergency
................... 7-2
Power Door Locks
............................. 3-4
Power Steering
................................. 5-12
Fluid
.......................................... 8-17
Power Windows
................................. 3-7
Push-Starting
.................................... 7-14
J94S.book Page 4 Saturday, June 23, 2001 1:04 PM