CONTROLS
The navigation system color display
and the system controls are located
in the center console.
Turn the rotary button clockwise or
counterclockwise to move the cursor
on the screen. In this user manual,
it will be referred to as SELECT.
Press the rotary button to enter
(confirm a selection) the selection
highlighted by the cursor. In this
user manual it will be referred to as
ENTER.
To CHOOSE a menu option means to SELECT (by turning the rotary
control) the option you desire and ENTER it (by pressing the rotary
control).
SELECT
PUSH TO
ENTER
Controls
6
SHORT-CUTS
The navigation system has five ªshort-cutº buttons that can be found on
the center console control unit.
REPEAT
Press ªrepeatº to receive the last
vocal guidance advice. This will only
give advice if the ªguidanceº has
been activated.
MAP
In certain screens the ªMapº button
has a screen toggle effect.
²On a digitized road it is possible
to switch between Guidance Screen, Map display and Split screen.
DETOUR
When the ªdetourº button is
pressed, the system checks whether
or not the ªguidanceº is activated. If
the system is in guidance mode, the
detour entry screen is shown. This screen only allows use of the rotary
control to select ªdetour distanceº. The ªRepeatº and ªOn/Offº buttons
are the only other functional buttons during this operation.
Refer to theAlternative Routechapter for more information on selecting
an alternative route.
VOLUME
When the ªVolumeº button is
pressed, the volume adjustment
screen is shown. The ªRepeatº and
ªOn/Offº buttons are the only
buttons that are functional when the volume screen is active.
Refer to theVolumesection of theSystem Settingschapter for more
information on volume settings.
REPEAT
MAP
DETOUR
VOLUME
Controls
7
