Audio System
132To recall a radio text message, touch the
ºRECALLº switch. Each time you touch the
switch, the message will be displayed from
the new one.
When you touch the ºOKº switch, the pre-
vious screen returns.
Cassette tape player operation
(a) Playing a cassette tape
UNG619
When you insert a cassette tape, the ex-
posed tape should be to the right.
The player will automatically start when you
insert a cassette tape. At this time, ºTapeº
appears on the display.
If a metal or chrome equivalent cassette tape
is put in the cassette player, the player will
automatically adapt to it and ºMTLº appears
on the display.
To stop or eject the cassette tape, push the
º
º button.
UNG605
If a cassette is already in the slot, push the
ºTAPEº button.
Dolby Noise Reduction* feature: If you
are listening to a tape that was recorded with
Dolby B Noise Reduction, touch the switch
marked with the double
±D symbol. The
º
º switch will be highlighted in green.
Touch the switch again to turn off Dolby B
NR.
The Dolby NR mode reduces tape noise by
about 10 dB. For best sound reproduction,
play your tapes with this switch on or off ac-
cording to the mode used for recording the
tape.
Audio System
140
Car audio system operating
hints
NOTICE
To ensure the correct audio system op-
eration:
Be careful not to spill beverages
over the audio system.
Do not put anything other than a cas-
sette tape or CD magazine into the
cassette tape slot or CD changer.
The use of cellular phone inside or
near the vehicle may cause a noise
from the speakers of the audio
system which you are listening to.
However, this does not indicate a
malfunction.
Radio reception
Usually, the problem with radio reception
does not mean there is a problem with your
radio ± it is just the normal result of conditions
outside the vehicle.For example, nearby buildings and terrain
can interfere with FM reception. Power lines
or telephone wires can interfere with AM sig-
nals. And of course, radio signals have a lim-
ited range, and the farther you are from a sta-
tion, the weaker its signal will be. In addition,
reception conditions change constantly as
your vehicle moves.
Here are some common reception problems
that probably do not indicate a problem with
your radio:
FM
Fading and drifting stations ± Generally,
the effective range of FM is about 40 km (25
miles). Once outside this range, you may no-
tice fading and drifting, which increase with
the distance from the radio transmitter. They
are often accompanied by distortion.
Multi±path ± FM signals are reflective, mak-
ing it possible for two signals to reach your
antenna at the same time. If this happens,
the signals will cancel each other out, caus-
ing a momentary flutter or loss of reception.
Static and fluttering ± These occur when
signals are blocked by buildings, trees, or
other large objects. Increasing the bass lev-
el may reduce static and fluttering.Station swapping ± If the FM signal you are
listening to is interrupted or weakened, and
there is another strong station nearby on the
FM band, your radio may tune in the second
station until the original signal can be picked
up again.
AM
Fading ± AM broadcasts are reflected by the
upper atmosphere ± especially at night.
These reflected signals can interfere with
those received directly from the radio station,
causing the radio station to sound alternately
strong and weak.
Station interference ± When a reflected sig-
nal and a signal received directly from a radio
station are very nearly the same frequency,
they can interfere with each other, making it
difficult to hear the broadcast.
Static ± AM is easily affected by external
sources of electrical noise, such as high ten-
sion power lines, lightening, or electrical mo-
tors. This results in static.
Caring for your cassette player and tapes
For high performance from your cassette
player and tapes:
Clean the tape head and other parts regular-
ly.
