2002 HONDA ACCORD COUPE radio

.....................
Heating and Cooling .108
.........
What Each Control Does . 108
............
How to Use the System . 111
..........
To Turn Everything Of f . 114
...............
Climate Control System . 115
.......
Fully-automatic Operation . 117
.......
Semi-automatic Operation . 118
Sunlight Sensor/ ............
Temperature Sensor . 122
..........
Audio System (LX, LX-V6) . 123
....
AM/FM/CD Audio System . 123
.................
Operating the Radio . 124
.................
Adjusting the Sound . 128
............
Audio System Lighting . 129
.........
Operating the CD Player . 130 .....
Operating the CD Changer . 132
....
CD Player Error Indications . 133
CD Changer Error .............................
Indications .134
Operating the Cassette .....................................
Player .135
............
Tape Search Functions . 136
..........
Audio System (EX, EX-V6) . 138
AM/FM/Cassette/ .
CD Changer Audio System . 138
.................
Operating the Radio . 139
.................
Adjusting the Sound . 143
............
Audio System Lighting . 144
....................
Radio Frequencies . 144
........................
Radio Reception .144
Operating the Cassette .....................................
Player .146
............
Tape Search Functions . 147
Caring f or the Cassette .....................................
Player .150
.....
Operating the CD Changer . 151
Loading CDs in the .............................
Changer .152
...............................
Operation .154
Removing CDs from the .............................
Changer .156 .......
Protecting Compact Discs . 158
CD Changer Error .............................
Indications .159
...........
Remote Audio Controls . 160
Audio System (Special Edition ..................................
models) .161
.................
Operating the Radio . 162
.................
Adjusting the Sound . 166
....................
Radio Frequencies . 167
........................
Radio Reception .167
.........
Operating the CD Player . 169
Operating the Optional CD .................................
Changer .171
.......
Protecting Compact Discs . 172
.....
CD Player Error Indication . 173
CD Changer Error Indications. 174
Operating the Cassette .....................................
Player .175
Caring f or the Cassette .....................................
Player .178
.......................
Thef t Protection .179
............................
Security System .180
................................
Cruise Control .181
HomeLink Universal .................................
Transceiver .185
Comf ort and Convenience Features
Comf ort and Convenience Feat ures107

µµ
Adjust the volume by turning the
PWR/VOL knob.
The band and f requency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
button. On the FM band, ST will be
displayed if the station is broadcast-
ing in stereo. Stereo reproduction on
AM is not available. The ignition switch must be in
ACCESSORY (I) or ON (II) to
operate the audio system. Turn the
system on by pushing the PWR/
VOL knob or the AM/FM button. You can use any of f ive methods to
f ind radio stations on the selected
band: TUNE, SEEK, SCAN, AUTO
SELECT, and the Preset buttons.
Use the TUNE knob to
tune the radio to a desired f requency.
Turn the TUNE knob to the right to
tune to a higher f requency, or to the
lef t to tune to a lower f requency.
Turn the knob right or lef t until the
display reaches the desired
f requency. The SEEK f unction
searches the band for a station with
a strong signal. To activate it, press
theSEEKbaroneitherthe or side, then release it.
Depending on which side you press,
the system scans upward or down-
ward f rom the current f requency. It
stops when it finds a station with a
strong signal.
Audio System
Comf ort and Convenience Feat ures
Operating the Radio
TUNESEEK
124

µ
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
on FM. Pick the Preset button you want
for that station. Press the button
and hold it until you hear a beep. Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each Preset
button.
To store a f requency: You can store the
f requencies of your f avorite radio
stations in the six preset buttons.
Each button will store one f requency
on the AM band, and two
f requencies on the FM band.
UsetheTUNE,SEEK,orSCAN
function to tune the radio to a
desired station.
1.
2.
3.
4. Preset
Audio System
Comf ort and Convenience Feat ures126
P P
R
RE ES
SE ET
T B
BUUT TT
TO
ON NSS T
TU
UN NEE K
KNNO OBB
S
SE EE
EK
K
B
BA A R
R
P
P
W
WR R//V
V O
OL L
K
KN NO OBB
A
A
M
M /
/F
FM M
B
BU UT TT
TO
ON N A
A
U
UT TO
O S
SEEL
LEE C
CT T
I
IN ND DI
ICCA A T
TO
OR R
S
SCCAA N
N B
BUUT TT
TO
ON N
A
A
.
.S
SE EL
L B
BUUT TT
TO
ON N

µIf you do not like the stations Auto
Select has stored, you can store
other f requencies in the preset
buttons. Use the TUNE, SEEK, or
SCAN f unction to f ind the desired
f requencies, then store them in the
selected preset buttons as described
previously.
Auto Select does not erase the
f requencies that you preset pre-
viously. When you return home, turn
of f Auto Select by pressing the
A. SEL button. The preset buttons
will then select the f requencies you
originally set.
If you are
traveling far from home and can no
longer receive the stations you
preset, you can use the Auto Select
feature to find stations in the local
area.
To activate Auto Select, press the
A. SEL button. A. SEL will f lash in
the display, and the system will go
into scan mode f or several seconds.
It automatically scans both bands,
looking f or stations with strong
signals. It stores the f requencies of
six AM stations and twelve FM
stations in the preset buttons. You
can then use the preset buttons to
select those stations.
If you are in a remote area, Auto
Select may not f ind six strong AM
stations or twelve strong FM stations.
If this happens, you will see a ‘‘0’’
displayed when you press any preset
button that does not have a station
stored.
Once a station’s f requency is stored,
simply press and release the proper
preset button to tune to it.
The preset f requencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio f use is
removed.
Audio System
Comf ort and Convenience Feat ures
AUTO SELECT
127

µThese two
modes adjust the strength of the
sound coming f rom each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the f ront-to-back
strength.
Select BAL or FAD by pressing the
TUNE knob. Adjust the Balance or
Fader to your liking by turning the
TUNE knob.
The displayed number shows you
the current setting.
When the adjustment level reaches
the center, you will see ‘‘ ’’.
The system will automatically return
the display to the selected audio
mode about f ive seconds af ter you
stop adjusting a mode with the
TUNE knob. For inf ormation, See page . You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .69
150
Audio System
Comf ort and Convenience Feat ures
Balance/Fader
Radio Frequencies and Reception A udio System L ighting
129

You operate the CD player with the
same controls used f or the radio.
With the ignition switch in
ACCESSORY (I) or ON (II), insert
the disc into the CD slot. Push the
disc in half way, the drive will pull it
in the rest of the way and begin to
play. The number of the track that is
playing is shown in the display.
You can also play 3-inch (8-cm) discs
without using an adapter ring. Play
only standard round discs. Odd-
shaped CDs may jam in the drive or
cause other problems.
For best results when using CD-R
discs, use only high quality discs
labeled f or audio use. When
recording a CD-R, the recording
must be closed in order f or the disc
to be used by CD players. CD-RW
discs will not work in this unit. Operating the CD Player
Audio System
Comf ort and Convenience Feat ures130
A A.
.S
SE EL
L//R
RD D M
M
B
BU UT TT
TO
ON N
C
CD
D S
SLLOOT T
C
CD D /
/T
T A
A P
PE
E
B
BU UT TT
TO
ON N
A
A
M
M /
/F
FM M B
BUUT TT
TO
ON N R
REEP
PE
EA
A T
T
I
IN ND DI
ICCA A T
TO
OR R
R RAA N
ND DO
OM M
I
IN ND DI
ICCA A T
TO
OR R
E
E
J
JEE C
CT T B
BUUT TT
TO
ON N
R
RP PT
T B
BUUT TT
TO
ON N
P
P W
WR R//V
V O
OL L
K
KN NO OBB S
SE
EE
EK
K/ /S
SK KIIPP
B
BA A R
R

µµ
You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks.
To move rapidly within a track, press
andholdtheSEEK/SKIPbar.Press
the side to move f orward. You
will see CUE in the display. Press the
side to move backward. You
will see REW displayed. Release the
bar when the system reaches the
point you want.
Each time you press and release the side of the SEEK/SKIP bar,
the system skips forward to the
beginning of the next track. Press
and release the side to skip
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track. To activate the Repeat
f eature, press and release the RPT
button. You will see RPT in the
display. The system continuously
replays the current track. Press the
RPT button again to turn it off.
This feature,
when activated, plays the tracks on
the CD in random order, rather than
in the order they are recorded on the
CD. To activate Random Play, press
and release the A. SEL/RDM button.
You will see RDM in the display. The
system will then select and play
tracks randomly. This continues
until you deactivate Random Play by
pressing A. SEL/RDM again.
When the system reaches the end of
the disc, it will return to the begin-
ning and play that disc again.
You can switch to the radio while a
CD is playing by pressing the AM/
FM button. Press the CD button to
return to playing the CD. The CD
will begin playing where it lef t of f .
If you turn the system of f while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition,
the disc will stay in the drive. When
youturnthesystembackon,theCD
will begin playing where it lef t of f .
Press the eject button to remove the
disc f rom the drive.
If you eject the disc, but do not
remove it from the slot, the system
will automatically reload the disc
af ter 15 seconds and put the CD
player in pause mode. To begin
playing the disc, press the CD button.
Audio System
Comf ort and Convenience Feat ures
REPEAT
RANDOM PLAY
131

µ
Û
If you turn the system of f while a
tape is playing, either with the PWR/
VOL knob or by turning of f the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the cassette player will be in
pause mode. To begin playing, press
the PLAY/PROG button. Fast Forward and Re-
wind move the tape rapidly. To re-
wind the tape, push the REW button.
You will see REW in the display. To
fast forward the tape, push the FF
button. You will see FF displayed.
Press the FF, REW or PLAY/PROG
button to take the system out of re-
wind or f ast f orward. When the sys-
tem reaches the end of the tape, it
reverses direction and begins to play. With a cassette playing, you can use
the FF, REW, SKIP, or REPEAT
f unction to f ind a desired program.
To switch to the radio or CD player
while a tape is playing, press the
AM/FM, or CD button. To change
back to the cassette player, push the
TAPE button.
The tape direction indicator will light
to show you which side of the
cassette is playing. The indicates
thesideyouinsertedfacingupward
is now playing. If you want to play
the other side, press the PLAY/
PROG button.
Dolby B noise reduction turns on
when you insert a cassette. The
indicator will light in the dis-
play. If the tape was not recorded
with Dolby B noise reduction, turn it
of f by pressing the NR button.
Noise reduction remains of f until you
turn it on by pressing the button
again.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
f rom the drive, press the EJECT
button on the cassette player.
Audio System
Comf ort and Convenience Feat ures
FF/REW T ape Search Functions
136