2002 GMC YUKON XL DENALI display

[x] Cancel search: display

Page 159 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-71
See ªMessage Centerº in the Index for further information.
If the transmission fluid reaches temperatures of
approximately 275F (135C) or greater, the message
center will display a TRANS HOT.

Page 164 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-76 Cruise Light
United States Canada
The CRUISE light comes on whenever you set your
cruise control. See ªCruise Controlº in the Index.
Tow/Haul Light
This light is displayed 
when the tow/haul mo

Page 165 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-77
Here are some situations you may experience with 
your fuel gage. None of these indicate a problem with
the fuel gage.
At the gas station, the fuel pump shuts off before the
gage reads full.
It

Page 166 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-78 Trans Fluid Hot
Your vehicle has a transmission temperature warning
display contained in the message center.
If the transmission fluid
temperature becomes high,
the message center will
display th

Page 167 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-79 Trans Hot...Idle Engine
Your vehicle has a transmission over-temperature
display contained in the message center.
If this warning message is
displayed, pull the vehicle
off the roadway when it is

Page 168 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-80 Low Coolant
This message is displayed
when the cooling system is
low on coolant.
The engine may overheat. See ªEngine Coolantº in 
the Index and have your vehicle serviced as soon as 
you can.

Page 169 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-81 Check Eng Oil Pressure
This message is displayed
when the engine oil pressure
is low.
See ªOil Pressure Gageº in the Index for 
more information.
Check Eng Oil Level
This message is displayed
w

Page 170 of 407

GMC YUKON XL DENALI 2002  Owners Manual 2-82 Change Engine Oil
This message is displayed
when the engine oil needs 
to be changed. The message
is only displayed for 
15 seconds at the start of
each ignition cycle.
When you change the engine