2002 BUICK RANDEZVOUS fold seats

1-2
Seats and Seat Controls
This section tells you about the seats -- how to
adjust them, take them out, put them back in, fold
and unfold them.
Driver's Four-Way Manual Seat
To move the seat forward
or rearward, pull up on the
lever, located on the front
left of the seat, to unlock it.
Slide the seat to where you want it and release the lever.
To make sure that the seat is locked into place, try to
move the seat with your body.
To raise the seat, pull up
on the lever located on the
front right side of the seat.
To lower the seat, push the
lever down. Adjust the seat
and release the lever.
CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver's seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don't want to. Adjust the driver's seat only when
the vehicle is not moving.

1-8
Rear Seats
The rear seats in your vehicle have seat operating
features to adjust, fold, remove and reinstall the seats.
By using the seat operating features, in the correct order,
you can easily remove the seats from your vehicle.
When you put the seats back in the vehicle, be sure to
follow the label on the back of the seat for proper location.
Split Bench Seats (If Equipped)
If your vehicle has the split bench seat, the seatbacks
can be folded forward or reclined individually and the
sections can be flipped forward or removed individually.Folding or Reclining the Seatbacks
CAUTION:
If the seatback isn't locked, it could move forward
in a sudden stop or crash. That could cause injury
to the person sitting there. Always press rearward
on the seatback to be sure it is locked.
The seatbacks on each section of the split bench seat can
be reclined or folded forward.

1-9
To recline the seatback on
base
-level split bench seats,
lift up on the recliner lever
located on the outboard
side of the seatback.
Base
-Level
To recline the seatback on
up
-level split bench seats,
push forward on the
recliner lever located
on the outboard side
of the seatback.
Up
-LevelUse the recliner lever to move the seatback to the
desired position.
It is easier to raise or lower the seatback if you lean
forward and take the weight off the seatback.
The seatbacks on each section also fold forward to put
items behind the seats.
Lift up or push forward on the recliner lever and fold
the seatback forward. The seatback will lock into place
when you push it back to the upright position.
After raising a seatback to an upright position, push and
pull on the seatback to check that it is locked upright.

1-10
Removing the Split Bench Seat
Each section of the split bench seat can be flipped
forward or removed individually.
1. Unlatch the shoulder belt from the lap-belt.
2. Make sure that the seatback is in the
upright position.
3. Lift up or push forward on the seatback recliner lever
to fold the seatback forward.
Base-Level
4. For base
-level split bench seats, pull the lever at the
base of the seat on the outboard side to release
the rear latches from the floor pins and flip the
seat forward.
For up
-level split bench seats, continue pushing
forward on the recliner lever to release the rear
latches from the floor pins and flip the seat forward.
The seat can stay in this position or it can be removed
from the vehicle by following the next steps.

1-64
If you're using a top strap-equipped child restraint in the
second row center bench seat and need to temporarily
transport a flat tire for repair, move the child restraint to
a rear seat outboard position. See ªSecuring a Child
Restraint in a Rear Outside Seat Positionº for more on
this, including important safety information.
Once you have the top strap anchored, you'll be ready
to secure the child restraint itself. Tighten the top strap
when and as the child restraint manufacturer's
instructions say.
Your vehicle has top strap anchors already installed for
the rear seating positions. An anchor bar for a top strap
is located at the rear of the seat cushion for each second
row outboard seating position and the anchor bar for
the center position for the bench seat is located on the
floor behind the second row seats. If the vehicle has the
extended rear convenience center, you need to remove
a plastic plug and look under the convenience center to
find the anchor bar for the center position for the bench
seat. If the vehicle has a third row seat and the seatback
is upright, there is an anchor strap located between the
third row seatback and cushion to anchor the child
restraint for the second row center position bench seat.
If the vehicle has a third row seat and the seatback is
folded, there is anchor on the back of the third row
seat for the second row center position bench seat.There is also a top strap anchor for third row passenger's
side outside position. Locate the anchor symbol on the
flap of carpet behind the seat. Lift up the carpet to
access the anchor.
Captain's Chairs

1-66
Second Row Center Position Bench Seat
with Third Row SeatSecond Row Center Position Bench Seat
with Third Row Seat Folded Down

4-35
NOTICE:
Your warranty does not cover parts or
components that fail because of overloading.
If you put things inside your vehicle -- like suitcases,
tools, packages, or anything else
-- they will go as fast
as the vehicle goes. If you have to stop or turn quickly,
or if there is a crash, they'll keep going.
CAUTION:
Things you put inside your vehicle can strike
and injure people in a sudden stop or turn, or in
a crash.

Put things in the cargo area of your vehicle.
Try to spread the weight evenly.

Never stack heavier things, like suitcases,
inside the vehicle so that some of them are
above the tops of the seats.

Don't leave an unsecured child restraint in
your vehicle.

When you carry something inside the
vehicle, secure it whenever you can.

Don't leave a seat folded down unless you
need to.

7-18 At Least Once a Year
Key Lock Cylinders Service
Lubricate the key lock cylinders with the lubricant
specified in Part D.
Body Lubrication Service
Lubricate all key lock cylinders, hood latch assemblies,
secondary latches, pivots, spring anchor and release
pawl, hood and door hinges, rear folding seats, liftgate
hinges. Part D tells you what to use. More frequent
lubrication may be required when exposed to a
corrosive environment.Starter Switch Check
CAUTION:
When you are doing this check, the vehicle could
move suddenly. If it does, you or others could be
injured. Follow the steps below.
1. Before you start, be sure you have enough room
around the vehicle.
2. Firmly apply both the parking brake and the regular
brake. See ªParking Brakeº in the Index if necessary.
Do not use the accelerator pedal, and be ready to turn
off the engine immediately if it starts.
3. Try to start the engine in each gear. The starter
should work only in PARK (P) or NEUTRAL (N).
If the starter works in any other position, your
vehicle needs service.