2002 BUICK RANDEZVOUS bulb

6-39
6. Turn the bulb socket one-quarter of a turn
counterclockwise.
7. Pull the bulb assembly out from the lamp housing.
8. Pull the bulb out of the base.
9. Install the new bulb into the electrical connector.
Push the bulb firmly enough so that the tabs hook
over the tab on the bulb.
10. Carefully put the bulb assembly back into the lamp
housing and turn the bulb socket one
-quarter of a
turn clockwise.
11. Replace the applique on the liftgate.
12. Gently lift the liftgate.
13. Reinstall the seven wing nuts and the
four outboard nuts.
14. Reinstall the panel inside the liftgate by connecting
the tabs.
15. Close the liftgate.
Outboard Taillamps, Brake Lamps and
Turn Signals
1. Open the liftgate.
2. Remove the
two screws on
the inboard
taillamp panel.

6-40
3. Pull the lamp directly rearward from the vehicle.
4. Turn the bulb socket one
-quarter of a
turn counterclockwise.
5. Pull the bulb assembly out from the lamp housing.
6. Unhook the electrical connector by lifting up the
tabs and separate the connector from the bulb base.
7. Install the new bulb into the electrical connector.
Push the bulb firmly enough so that the tabs hook
over the tab on the bulb.
8. Carefully put the bulb assembly back into the lamp
housing and turn the bulb socket one
-quarter of a
turn clockwise.
9. Reinstall the lamp to its pocket by lining up
the mounting pin and pushing forward to set
the position.
10. Reinstall the screws removed in Step 2.
11. Close the liftgate.
Windshield Wiper Blade Replacement
Windshield wiper blades should be inspected at least
twice a year for wear or cracking. See ªWiper Blade
Checkº in the Index for more information.
Replacement blades come in different types and are
removed in different ways. For proper type and length,
see ªNormal Maintenance Replacement Partsº in
the Index.
Here's how to replace the windshield wiper blades:
1. Turn the wipers on to the lowest intermittent setting.
2. Turn off the ignition while the wipers are at the
outer positions of the wipe pattern. The blades are
more accessible for removal/replacement while in
this position.
3. Pull the windshield wiper arm away from
the windshield

6-70
Spare Fuses Usage
64 Spare
65 Spare
66 Spare
67 Spare
68 Spare
69 Spare
Fuse Puller
70 Fuse Puller
Diode

Diode for Air Conditioning
Compressor Clutch
Replacement Bulbs
For any bulb not listed here contact your dealer.
Headlamps
High
-beam 9005. . . . . . . . . . . . . . . . . . . . . . . . . . .
Low
-beam 9006. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Turn Signal/Parking Lamps 3457K. . . . . . . . . .
Sidemarker Lamps 168. . . . . . . . . . . . . . . . . . . . . . . .
Liftgate Mounted
Taillamps 161. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back
-up Lamps 921. . . . . . . . . . . . . . . . . . . . . . . . .
Rear Outboard Stop/Tail/Turn 3057K. . . . . . . . . . . . .