161n
OverviewControlsMaintenanceRepairsDataIndex
Changing a wheel5. Position the jack at the jacking point
closest to the flat tire so that the jack
base is vertically below the jacking
point and the entire surface of the
head of the jack will move into the
square recess of the jacking point
(refer to the illustration detail) when
the jack is cranked
6. Jack the vehicle up until the wheel
you are changing is raised from the
ground
7. Unscrew the lug bolts and remove
the wheel
8. Remove accumulations of mud or
dirt from the mounting surfaces of
the wheel and hub. Clean the lug
bolts 530de236
9. Position the spare wheel. Secure
the wheel by turning at least two
lug bolts into opposite bolt holes
10. Screw in the remaining lug bolts.
Tighten all the bolts securely
11. Lower the jack and remove it from
beneath the vehicle
12. Tighten the lug bolts in a diagonal
pattern
13. Check and correct the tire inflation
pressure at the earliest opportunity.
Vehicles with Tire Pressure Monitor
(RDC):
After mounting the spare tire or
correcting the tire inflation pres-
sure, reactivate the system, refer to
page 98.
The vehicle jack is designed for
changing wheels only. Do not
attempt to raise another vehicle model
with it or to raise any load of any kind.
To do so could cause accidents and
personal injury.
To ensure continued safety, have the
tightness of the lug bolts checked with
a calibrated lug wrench [torque specifi-
cation: 101 lb-ft (140 Nm)] at the
earliest opportunity.<
Store the wheel and the tools in the
order opposite that for removal.
Before removing the support rod,
be sure that the tailgate is held
down firmly. If you fail to do so, it could
retract sharply upward and cause
personal injury and vehicle damage.
After you remove the rod, close the tail-
gate carefully. Continue to hold it firmly
until it is completely closed.<
If light-alloy wheels other than original
BMW light-alloy wheels have been
mounted, it may be necessary to use
different lug bolts for those wheels.
Replace the defective tire as soon as
possible and have the new wheel/tire
balanced.
Everything from A to Z
181n
OverviewControlsMaintenanceRepairsDataIndex
Socket
power supplies119t
vacuum cleaner119t
Spare key30
Spare tire158t
Spare wheel158
removal aid159t
Speaker117
Special features of winter
tires140
Special wash program70
Speed89
Speed control71
Speed limit86, 87
Speedometer15, 17
Sports seat45
Standing lamps101
Starting assistance164t
Starting
problems63t, 164t
Starting the engine62, 63
Steering wheel
adjustment52
adjustment, automatic52
heating53
lock62
memory50
Steering wheel with
multifunction buttons22
Steptronic66
Stopwatch84Storage compartments116
in the cargo area124
Summer tires139
Sunroof42
Sunshades112
Switching off the engine64
Switching off the vehicle64
Switch-on times
input85
Symbols8
Synthetic oils144
System malfunction
indicators77
TTachometer75
Tail lamps155t
bulb replacement155t
Tailgate37
opening from the
outside36
radio control operation33
release following an
electrical
malfunction38t
Tank capacity173
Technical
modifications10, 148
Telephone preparation117Temperature display,
outside
temperature74, 80
Temperature gauge76
Temperature
layering105, 110
Temperature setting108t
Thigh support
adjustment45
Third brake lamp156
Tilt alarm33
Tilt alarm sensor40
Tilt function, passenger side
mirror51
Time
calling up83
changing83
of arrival, estimated88
Timer
refer to Stopwatch
refer also to the Owner's
Manual for the Onboard
Computer
Tire136
damage136t
pressure monitoring98
renewal137
tread136
Tire inflation
pressures26, 136
monitoring98
table27Tire Pressure Monitor
(RDC)98
warning lamp18, 20
Tire Quality Grading138
Tools152t
Torque170
Tow fittings166t
Towing the vehicle166t
Tow-starting166t
Track width171
Traction Control System,
refer to DSC92
Transmission65, 66
Transporting children
safely58
Tread depth, tires136
Trip odometer74
Turn signal indicator69
bulb replacement154t
Turning circle171
UUniform Tire Quality Grading
(UTQR)138
Universal Transmitter113
Used batteries,
disposal162
Used oil, disposal144t
