2002 BMW MOTORRAD R 1150 RS ECU

1
General information and controls
17
AB
C
Adjusting seat
Front seat
e Attention:
When installing the seat, make
sure that it is firmly located.
Make sure the seat is at the
same height in the front and
rear mounts.
– Remove the rear seat
 Take off the front seat
There are three rider's seat
height positions:
 A = high B = centre
C = low
 Guide the front seat into the appropriate catches at front
and rear Rear seat
e Attention:
When installing the seat, make
sure that it is firmly located.
 Working from the rear, slide the rear seat into position at
the top and press gently into
the holder (arrow) to secure
Seat
10rsbkg2.book Seite 17 Dienstag, 19. November 2002 4:56 16

1
General information and controls
18
A
3
2
1
d Warning:
After an accident or if the
motorcycle has fallen over,
check that the system cases
are correctly secured.
Max. load per system case:
10 kg (22 lb).
With System cases installed,
it is advisable not to exceed
130 km/h (80 mph).
Opening the System case Turn key in case lock to posi-
tion A.
 Pull up the carrying handle 1
and catch 2
– The two indicators 3 turn red
 Open the System case
Closing the System case
e Attention:
Risk of breaking the locking
tongue. Before closing handle 1
or catch 2, turn the key in the
case lock to position A.
 Turn key in case lock to posi- tion A.
 Push down catch 2 and
carrying handle 1
– The two indicators 3 turn
black
Lock the case and remove the
key
OAOptional accessories
System caseOA
10rsbkg2.book Seite 18 Dienstag, 19. November 2002 4:56 16

1
General information and controls
19
Removing System case Turn key in case lock to posi-tion A.
 Pull up carrying handle 1
– The two indicators 3 turn red
 Remove the key and lift the
system case off its holder
OAOptional accessories
Installing System case
e Attention:
Risk of breaking the locking
tongue.
Before closing handle 1 or
catch 2, turn the key in the case
lock to position A.
d Warning:
Always make sure that the
cases are secured.
An incorrectly secured case
could be lost and endanger
other road users.
 Insert the system case into the holder (arrows), making
sure that it is firmly seated in
the lower holder and the
upper hook
 Turn key in case lock to posi- tion A.
 Push down the carrying han-
dle 1
– The two indicators 3 turn
black
 Lock the case and remove the
key
System caseOA
10rsbkg2.book Seite 19 Dienstag, 19. November 2002 4:56 16