
89n
OverviewControlsMaintenanceRepairsDataIndex
Digital clock in the MID
*
Reminder signalYou can program a reminder signal 
(Memo) to be heard every hour, so that 
you are sure not to miss a news broad-
cast, for example.
Press the left side of the button.
Press:
MEMO OFF appears in the display for 
entry and query buttons, and the tone 
symbol will appear in the upper right of 
the display.
A signal is then heard 15 seconds 
before each hour.
TimerPress the left side of the button.
Press.
Display shows:
To start the stopwatch function:
Press the right side of the button.
To take an intermediate time reading:
Press.
Press:
The stopwatch display can be seen 
counting up; the stopwatch continues 
to run.
To halt the stopwatch:
Press the right side of the button.
The stopwatch is halted when the 
ignition switch is turned back to 0, 
but starts to run again when the ignition 
key is turned to 1.< 

98n
ASC+T/DSC
*
Indicator lamp
The indicator lamp in the instru-
ment cluster goes out shortly 
after you switch on the ignition. 
Refer to page 21.
Indicator lamp flashes:
The system is active and governs drive 
torque and braking force.
If the indicator lamp fails to go out after 
the engine is started, or if it comes on 
during normal driving:
There is a system malfunction or the 
system was deactivated with the 
button. You can still drive the vehicle 
normally without ASC+T/DSC. 
Please consult your BMW center for 
repairs.
To deactivate the systemPress the button, the indicator lamp 
lights up and remains on continuously.
Depending on equipment options, the 
button is marked with ASC or DSC.
With deactivated ASC+T/DSC you are 
driving with conventional, unregulated 
torque transfer.
In the following exceptional situations, 
it may be effective to deactivate the 
ASC+T/DSC for a brief period:
>When rocking the vehicle or starting 
off in deep snow or on loose surfaces
>When driving with snow chains.390us728
To reactivate the systemPress the button again; the indicator 
lamp goes out.
The laws of physics cannot be 
repealed, even with ASC+T/DSC. 
An appropriate driving style always 
remains the responsibility of the driver. 
Do not use the extra safety margins 
furnished by these systems as an 
excuse for taking unnecessary risks.< Dynamic Brake Control (DBC)
*
DBC is an integral component of the 
DSC system.
The system responds to sudden, high-
intensity applications of force to the 
brake pedal by automatically braking 
the vehicle with maximum boost to 
achieve the shortest possible braking 
distances during "panic stops." This 
system exploits all the benefits of ABS. 
Do not reduce the pressure exerted 
against the brake pedal until the 
braking maneuver has been completed. 
DBC is deactivated when you release 
the brake pedal. 

99n
OverviewControlsMaintenanceRepairsDataIndex
Level control system
*
Tire Pressure Monitor (RDC)
*
The warning lamp for the level 
control system comes on, or the 
message "SELFLEVEL 
SUSP.INACT" appears in the Check 
Control: there is a malfunction in the 
self-level control system.
Stop and inspect the vehicle. If it is 
riding significantly lower in the rear than 
in the front, or if it is sitting at an incline 
(left rear compared to right rear), 
consult the nearest BMW center. Drive 
with appropriate caution in the mean-
time. The vehicle has reduced ground 
clearance or driving comfort is notice-
ably reduced.
Even if the attitude of the vehicle is 
normal, you should consult the nearest 
BMW center if the warning lamp indi-
cates a system fault.
The conceptRDC monitors the tire pressures at all 
four wheels, even when the vehicle is 
moving. The system provides an alert 
whenever the inflation pressure drops 
significantly below the specified pres-
sure in one or more tires.
In order for the system to "learn" the 
correct tire inflation pressure, check the 
inflation pressure in all tires. Refer to 
the table of "Tire inflation pressures" 
beginning on page 27 and make any 
necessary corrections. Then activate 
the system.
This indicator lamp in the instru-
ment cluster or the Check 
Control will inform you if the tire 
pressure is not correct.
Activate the system1. Turn the ignition key to position 2 (do 
not start the engine)
2. Maintain pressure on the button until 
the yellow indicator lamp in the 
instrument cluster comes on for 
several seconds or the message 
"SET TIRE PRESSURE" appears in 
the Check Control panel
3. After you have driven for a few 
minutes, the RDC will import the 
current inflation pressure in the tires 
as the reference values which the 
system will monitor.
You will only have to repeat this proce-
dure if the tire inflation pressure must 
be corrected. Otherwise, the RDC func-
tions automatically when the ignition 
key is in position 2, and thus operates 
whenever the vehicle is driven.390de704 

110n
Automatic climate control
*
Air conditioning
The air is cooled and 
dehumidified and Ð 
depending on the temperature setting Ð 
warmed again when the air conditioning 
is switched on. Depending on the 
weather, the windshield may fog over 
briefly when the engine is started. You 
can reduce condensation forming on 
the windows by switching on the air 
conditioning.
Condensation forms in the air 
conditioning system during opera-
tion, which then exits under the vehicle. 
Traces of condensed water of this kind 
are thus normal.< 
Maximum cooling
With the engine running 
this program provides 
maximum cooling at outside tempera-
tures above approximately 41 7 (5 6).
60 7 (16 6) appears in the tempera-
ture display 9, and the system reverts to 
the recirculated-air mode while simulta-
neously providing maximum airflow 
through the vent outlets only. That is 
why you need to keep these open if you 
select this program.
Automatic recirculated-air 
control (AUC)
You can respond to 
unpleasant external odors 
by temporarily stopping the flow of 
outside air. The system then recircu-
lates the air currently within the vehicle. 
Press the button repeatedly to run 
through the following control sequence:
>Indicator lamps off: outside airflow 
operational
>Left-hand indicator lamp on Ð AUC 
mode: the system recognizes pollut-
ants in the outside air and blocks the 
flow of air when necessary. The 
system then recirculates the air 
currently within the vehicle.
Depending on the air quality, the 
automatic system then switches back 
and forth between outside air supply 
and recirculation of the air within the 
vehicle
>Right-hand indicator lamp on: the 
flow of external air into the vehicle is 
permanently blocked. The system 
then recirculates the air currently 
within the vehicle.
If you have a multifunction steering 
wheel with the recirculated-air button 
(refer to page 22), you can also use it to 
switch between "Off" and the recircu-
lated-air mode or AUC and the recircu-
lated-air mode.
If the windows should fog over in 
the recirculated-air mode, switch 
the recirculated-air mode off and 
increase the air supply as required.< Rear window defroster
When the rear window 
defroster is activated, the 
indicator lamp comes on. The rear 
window defroster switches off automat-
ically. 

Everything from A to Z
181n
OverviewControlsMaintenanceRepairsDataIndex
Reminder signal (Memo)89 
Remote control34 
computer95 
Removable rear-seat 
backrest119 
Remove condensation from 
windows106, 109 
Replacing 
fuses160t 
lamps and bulbs151t 
wiper blades150t 
Reporting safety defects11 
Reservoir, washer 
system139t 
Residual heat111 
Rims135 
Roller sun blind112 
Roll-up cover123 
Roof load capacity171 
Roof-mounted luggage 
rack127 S 
Safety belts53 
Safety defects, reporting11 
Safety lock buttons37 
Seat belts53 
Seats electric power50 
manually-adjusted50 
memory setting54 
Secure the load126 
Securing cargo42, 126 
Selector lever, automatic 
transmission70, 73 
Service and Warranty 
Information Booklet (US 
models)144 
Service Interval 
Display82, 144 
Shiftlock70, 73 
Shoulder support51 
Side airbags58 
Side Impact Head Protection 
System58 
Side lamps 
bulb replacement152t 
Side turn signal 
bulb replacement153t 
Ski bag120 
Ski bag in the sport 
wagon122 
Sliding/tilt sunroof46 
manual operation47 
with glass moonroof47 
Snow chains136 Socket for attaching 
electrical appliances118 
Spare tire157t 
Speaker117 
Special characteristics of 
winter tires136 
Special oil141t 
Speed94 
Speed limit91 
Speed, average86, 94 
Speedometer15, 16, 17 
sport wagon 
anchorages126 
compartments in the 
luggage 
compartment124 
cover in the luggage 
compartment124 
folding down the rear 
backrest123 
LATCH child-restraint 
system64 
load-securing 
devices126 
luggage 
compartment123 
opening the rear 
window40 
partition net123 rear window wiper, blade 
replacement150t 
releasing the tailgate after 
an electrical 
malfunction39 
roll-up cover123 
securing a load126 
ski bag122 
tail lamp assembly, bulb 
replacement154t 
transporting children 
safely64 
Standing lamps102 
Starting assistance162t 
Starting problems67t 
Starting the engine67 
Steering wheel 
heating56 
lock66 
memory setting54 
Steering wheel with 
multifunction buttons22 
Steptronic73 
Stopwatch89 
for additional information 
refer to the "Owner's 
Manual for Onboard 
Computer" 
Storage compartments116 
in the cargo area124