
 
21n
 
OverviewControlsMaintenanceRepairsDataIndex
 
Indicator and warning lamps
 
Self-leveling suspension
 
*  
l
 
The level control system is inac-
tive. Please consult the nearest 
BMW center. 
For additional information: refer to 
page 99
Automatic Stability Control plus 
Traction (ASC+T)/Dynamic 
Stability Control (DSC)
 
*  
l
 
 
ASC+T/DSC has been deactivated, 
either manually at the button or auto-
matically in response to a system 
malfunction. In the event of a malfunc-
tion, have the system checked by your 
BMW center. 
For additional information: refer to 
page 97
Engine-management system
 
* 
There is a fault in the electronic 
engine-management system. 
You can continue to drive with reduced 
engine output and engine speed. 
Please have the system inspected by 
your BMW center.
 
Service Engine Soon 
 
l
 
If the indicator lamp comes on 
either continuously or intermit-
tently, this indicates a fault in the emis-
sions-related electronic systems. 
Although the vehicle remains opera-
tional, you should have the systems 
checked by your BMW center at the 
earliest possible opportunity.
For additional information: refer to 
page 146
Service Engine Soon warning 
lamp for Canadian models.
Check Filler Cap
 
* 
 
 
l 
 
If the indicator lamp comes on 
although the fuel cap is secured 
correctly: this indicates a malfunction in 
the fuel system. Have the system 
inspected at your BMW center at the 
earliest opportunity.
Additional information: refer to page 25
 
Green: for your information
 
Turn signal 
Flashes when the turn signal is 
on. Rapid flashing indicates a 
system malfunction.
For additional information: refer to 
page 76
Cruise control 
Lights up when the system is 
switched on: available for oper-
ation via the multifunction steering 
wheel. 
For additional information: refer to 
page 78
Front fog lamps
Lights up whenever you switch 
on the front fog lamps. 
For additional information: refer to 
page 102
 
Blue: for your information
 
High beams
Lights up when the high beams 
are on or the headlamp flasher 
is actuated. 
For additional information: refer to 
pages 76 and 102 

76n
Indicator/Headlamp flasher
Washer/Wiper system
1 High beams (blue indicator lamp)
2 Headlamp flasher 
(blue indicator lamp)
3 Turn signal indicator 
(green indicator lamp accompanied 
by periodic clicking sound from the 
relay)To signal brieflyPress the lever up to but not beyond 
the detent. It then returns to the center 
position when released.
If the indicator lamp and the 
clicking from the relay are both 
faster than normal, one of the turn 
signal indicators has failed.<390de722
0 Wipers retracted
1 Intermittent mode or rain sensor
*
2 Normal wipe
3 Fast wipe
4 Brief wipe
5 Clean the windshield
6 Intensive cleaning
*
7 Rotary dial for controlling sweep 
intervals in the intermittent mode and 
for setting the rain sensor's sensitivity 
level
*
394de730
Intermittent mode or rain sensor
*
Intermittent mode:
You can set the wipe interval to four 
stages with rotary dial 7. 
In addition, the wipe interval is varied 
automatically depending on road 
speed. 
Rain sensor:
The rain sensor is positioned on the 
windshield, directly ahead of the inte-
rior rearview mirror.
To activate the rain sensor:
Move the lever to position 1 with the 
ignition key in position 1 or higher. The 
wipers travel once across the wind-
shield, regardless of the weather 
conditions.
You can leave the lever permanently in 
position 1. Whenever the ignition key is 
in position 1 or 2, all you then need to 
do to activate the rain sensor is briefly 
turn the rotary dial 7.
To adjust the sensitivity of the rain 
sensor:
Turn rotary dial 7.
Deactivating the rain sensor:
Move lever to position 0. 

82n
Coolant temperature gauge Service Interval DisplayBlueThe engine is still cold. Drive at 
moderate engine and vehicle speeds.RedWhen you switch on the ignition, the 
warning lamp
* comes on briefly to 
confirm that the system is operational.
If the warning lamp lights up during 
normal vehicle operation, or the 
message "COOLANT TEMPERATURE" 
appears in the Check Control
*, the 
engine is overheated. Shut off the 
engine immediately and allow it to cool 
down.
390de007
Between the blue and red zonesNormal operating range. The needle 
may rise as far as the edge of the red 
sector in normal operation.
Checking coolant level: refer to 
page 142.
The range of available displays varies 
according to your individual vehicle's 
equipment.
Green lampsThe number of illuminated lamps 
decreases as the time for your next 
maintenance visit approaches.Yellow lampThis field appears together with 
OILSERVICE or INSPECTION.
Maintenance is due. Please contact 
your BMW center for an appointment.Red lampThe maintenance deadline has been 
passed.390us702 

102n
Instrument lighting
High beams/Standing lamps
Fog lamps
Turn the rotary dial to adjust the illumi-
nation intensity.390de733
1 High beams 
(blue indicator lamp)
2 Headlamp flasher 
(blue indicator lamp)
3 Standing lampsStanding lamps, left or rightAs an additional feature, you can 
illuminate your vehicle on either side 
for parking, if you wish to do so:
With the ignition key in position 0, push 
the lever in the appropriate direction. 
The lever engages in the turn signal 
position.390de722
Front fog lamps
The green indicator lamp in the 
instrument cluster lights up to 
indicate that the front fog lamps 
are on.
If the high beams are switched on, the 
fog lamps go out.
If the automatic headlight control 
is on, the low beams will come on 
automatically whenever you activate 
the fog lamps.<
390us735 

106n
Air conditioningDraft-free ventilation You can adjust the air outlets for the 
upper body area for optimal personal 
comfort:
1 Rotary dials for opening and closing 
the vent outlets through an infinitely- 
variable range
2 Levers for adjusting airflow direction
3 Rotary dial allows you to control the 
temperature of the airflow as desired:
>Turn toward blue Ð colder
>Turn toward red Ð warmer.390de685
Rear passenger area ventilation1 Rotary dial for opening and closing 
the vent outlets through an infinitely 
variable range
2 Levers for selecting airflow direction.
The air that flows out here is somewhat 
cooler than the air delivered to the foot-
well.Microfilter The microfilter removes dust and pollen 
from the incoming air. Your BMW 
center will replace it during routine 
maintenance. A substantial reduction in 
airflow indicates that the filter needs to 
be replaced early.390de687
To defrost windows and remove 
condensation 1. Use the rotary temperature selector 
to set the system for an interior 
temperature that you find comfort-
able, such as 70 7 (22 6) 
2. Set the air distribution rotary dial
to 
3. Set the blower/air supply rotary dial 
completely to the right
4. Close the air outlets in the rear 
seating area
5. Switch on the rear window defroster 
to defrost the rear window.390us710 

111n
OverviewControlsMaintenanceRepairsDataIndex
Automatic climate control
*
Residual heating mode
The heat which is stored in 
the engine is utilized for 
heating the interior when the engine 
has been switched off (while waiting at 
a railroad crossing, for instance).
In ignition key position 1, you can alter 
the settings of the automatic climate 
control. In ignition key position 0, the 
system automatically directs heated air 
to the windshield, side windows and 
footwells. 
This function is available for oper-
ation when the outside tempera-
ture is below approximately 59 7 
(15 6), with the engine warm from 
recent operation and an adequate 
charge in the battery. The LED on the 
button will light up when all conditions 
have been met.< 
Draft-free ventilationYou can adjust the air outlets for the 
upper body area completely for your 
personal comfort:
1 Rotary dials for infinitely-variable 
opening and closing of the vent 
outlets
2 Selector levers for airflow direction
3 Rotary dial allows you to control the 
temperature of the airflow as desired:
>Turn toward blue Ð colder
>Turn toward red Ð warmer.390de685
Rear passenger area ventilation1 Rotary dial for infinitely-variable 
opening and closing of the vent 
outlets
2 Selector levers for airflow direction
3 The rotary dial operates in the same 
way as the front dial to adjust the 
temperature of the emerging air.390de686