
 
Contents
 
© 2001 Bayerische Motoren Werke
Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the 
written consent of BMW AG, Munich. 
Order No. 01 40 0 156 144
deutsch VIII/01
Printed in Germany
Printed on environmentally friendly paper 
(bleached without chlorine, suitable for recycling). 
Overview
Controls and features
 
Cockpit14
Instrument cluster15
Indicator and warning lamps17
Multifunction steering wheel 
(MFL)21
Hazard warning triangle22
Refueling22
Fuel specifications23
Tire inflation pressures24
 
Opening and closing:
 
Keys28
Central locking system28
Opening and closing Ð via the 
remote control29
Opening and closing Ð via the 
door lock31
Opening and closing Ð from the 
inside32
Luggage compartment lid33
Luggage compartment35
Alarm system36
Electric power windows37
Sliding/tilt sunroof38
 
Adjustments:
 
Correct sitting posture40
Seats40
Manual seat adjustment41
Power seat adjustment42
Lumbar support42
Head restraints43
Entering the rear43
Safety belts44
Seat and mirror memory45
Seat heating46
Steering wheel46
Mirrors47
 
Passenger safety systems:
 
Airbags48
Transporting children safely51
Vehicle Memory, Key 
Memory53
 
Driving:
 
Ignition lock54
Starting the engine54
Switching off the engine55
Parking brake56
Manual transmission56
Automatic transmission with 
Steptronic57
Indicator/Headlamp flasher59
Washer/Wiper system/Rain 
sensor60
Cruise control62
 
Everything under control:
 
Odometer64
Tachometer64
Energy control64
Fuel gauge65
Temperature gauge65
Service Interval Display65
Check Control66
Computer66
 
Technology for safety and 
driving convenience:
 
Park Distance Control (PDC)69
Automatic Stability Control plus 
Traction (ASC+T)70
Dynamic Stability Control 
(DSC)71
Tire Pressure Monitor (RDC)73
Flat Tire Monitor75
 
Contents 

 
16n
 
Instrument cluster
 
7 Indicator and warning 
lamps17 to 20
8 Reset trip odometer to zero
9 Indicator for Check Control6610 Display for
 
>
 
Trip odometer/odometer64
 
>
 
Clock66
 
>
 
Service Interval65
 
>
 
Computer6611 Selector lever and program display 
for automatic transmission18, 59
12 Control button for the clock66
13 Indicator and warning 
lamps17 to 20 

36n
Alarm system
*
The conceptThe vehicle alarm system responds:
>When a door, the hood or the 
luggage compartment lid is opened
>To movement inside the vehicle (inte-
rior motion sensor)
>To variations in the vehicle's tilt angle 
such as those occurring during 
attempts to steal the wheels or tow 
the vehicle
>To interruption of battery voltage.
The system responds to unauthorized 
vehicle entry and attempted theft by 
simultaneously activating the following:
>The acoustic alarm sounds for 
30 seconds
>The hazard warning flashers are acti-
vated for approx. five minutes
>The high beams flash on and off in 
rhythm with the hazard warning 
flashers.
To arm and disarm the 
alarm systemWhen the vehicle is locked or unlocked 
via the driver's door lock or with the 
remote control, the alarm system is also 
simultaneously armed or disarmed.
You can have different acknowl-
edgment signals set to confirm 
arming and disarming.<
You can open the luggage compart-
ment lid even when the system is 
armed by pressing the button on the 
remote control, refer to page 30. When 
it is closed, the lid is once again 
secured.
Indicator lamp displays>The indicator lamp below the interior 
rearview mirror flashes continuously:
the system is armed
>The indicator lamp flashes while the 
system is armed: the door(s), the 
hood or luggage compartment lid are 
not completely closed. Even if you do 
not close the alerted area(s), the 
remaining areas are secured, and the 
indicator lamp will flash continuously 
after 10 seconds. However, the inte-
rior motion sensor is not activated 

58n
Automatic transmission with Steptronic
*
N  NeutralSelect only when stopping for an 
extended period.D  Drive (automatic shift program)This position is designed for driving 
under all normal operating conditions. 
All forward gears are available.KickdownIn the kickdown mode, you achieve 
maximum acceleration and in 
position D top speed.
Depress the accelerator pedal past the 
increased resistance point at the full-
throttle position.
M/S Manual mode and
Sport ProgramMove the selector lever from D to M/S 
to activate the Sport Program; SD 
appears in the display panel. The M/S 
mode is recommended for perfor-
mance-oriented driving.
Once in the M/S mode you can tap the 
selector lever to switch the automatic 
transmission from the Sport Program to 
its manual selection mode.
This mode allows you to execute 
upshifts manually by tapping the lever 
toward "+," while downshifts are 
selected by tapping in the "Ð" direction. 
The displays M1 through M5 appear in 
the display panel to indicate your 
current gear selection.
The Adaptive Transmission Control 
(ATC) executes upshifts and downshifts 
only when the new gear will provide a 
suitable combination of engine and 
road speed, i.e., ATC will not execute 
downshifts if the engine speed is too 
high.  The desired, then the actual gear, 
briefly appear in the instrument cluster.
To accelerate quickly in the 
manual mode (to pass another 
vehicle), shift down manually or employ 
the kickdown mode.<
Shifting from M/S to the selector lever 
positions P, R and N is possible only by 
going through D. 

59n
OverviewControlsMaintenanceRepairsDataIndex
Automatic transmission with Steptronic
*
Indicator/Headlamp ßasher
 
Available displays 
P R N D SD M1 M2 M3 M4 M5
Electronic transmission control 
module
If the indicator lamp comes on, 
there is a malfunction in the 
transmission system.
Bring the vehicle to a stop. Move the 
transmission selector lever to "P." 
Engage the parking brake and turn the 
engine off (ignition key to position 0). 
Wait a few seconds, then start the 
engine.
If the indicator lamp goes out after a 
few seconds, normal transmission 
performance has been restored. You 
may continue to drive as usual. 
If the indicator lamp does not go out, 
you can place the selector lever in all 
positions. However, the vehicle will now 
only operate in 3rd and 4th gear. 
If this happens, avoid extreme engine 
loads and consult the nearest BMW 
center.
Never work in the engine 
compartment when a drive gear 
(forward or reverse) is engaged. If you 
do this, the vehicle could move.<
For towing or jump-starting, refer to the 
information beginning on page 128.
1 High beams (blue indicator lamp)
2 Headlamp flasher (blue indicator 
lamp)
3 Turn signal indicator (green indicator 
accompanied by periodic clicking 
sound from the relay)To signal brieflyPress the lever up to but not beyond 
the detent. It then returns to the center 
position when released.
If the flashing of the turn signal 
indicators and the clicking from 
the relay are both faster than normal, 
one of the turn signal indicators has 
failed.< 

64n
Odometer Tachometer Energy control 1 Odometer
2 Trip odometerOdometer You can activate the displays shown in 
the illustration with the ignition key in 
position 0 by pressing the button in the 
instrument cluster.Trip odometerTo reset the trip odometer to zero, 
press the button with the ignition key in 
position 1 or 2.
Never allow the engine to operate with 
the needle in the red overspeed zone of 
the gauge.
To protect the engine, the fuel supply is 
interrupted when you approach this 
sector.
Indicates the current fuel consumption 
in mpg (in liters/100 km on Canadian 
models). You can check your current 
driving style to see whether it is condu-
cive to economy and minimum exhaust 
emissions.
When the vehicle is stationary, the 
display goes to Maximum (zero on 
Canadian models). 

65n
OverviewControlsMaintenanceRepairsDataIndex
Fuel gauge  Temperature gauge  Service Interval DisplayOnce the indicator lamp stays on 
continuously, there are still approx. 
2 gallons (8 liters) of fuel in the fuel 
tank.
For fuel tank capacity, refer to 
page 135.
Certain operating conditions (such as 
those encountered in mountainous 
areas) may cause the needle to fluc-
tuate slightly.
Please refuel early, since driving 
to the last drop of fuel can result in 
damage to the engine and/or catalytic 
converter.<
When you switch on the ignition, the 
indicator lamp lights up briefly as an 
operation check.
BlueThe engine is still cold. Drive at 
moderate engine and vehicle speeds.RedWhen you switch on the ignition, the 
warning lamp comes on briefly to 
confirm that the system is operational.
If the lamp comes on during normal 
vehicle operation: the engine has over-
heated. Stop and switch the engine off 
immediately and allow it to cool down.
Checking coolant level, refer to 
page 111.Between the blue and red zonesNormal operating range. The needle 
may rise as far as the edge of the red 
sector in normal operation.
Remaining distance to serviceThe displays shown in the illustration 
appear for a few seconds when the 
ignition key is in position 1 or after the 
engine is started.
The next service due appears with the 
message OIL SERVICE or INSPECTION, 
together with the distance remaining in 
miles (kilometers) before the next sched-
uled service. 
The computer bases its calculations of 
the remaining distance on the preceding 
driving style.
A flashing message and a "Ð" in front of 
the number mean that the service inter-
val has already been exceeded by the 
distance shown on the display. Please 
contact your BMW center for an 
appointment. 

66n
Check Control Computer The following information and/or condi-
tions are indicated using symbols, 
starting with the ignition key in 
position 2, until the condition has been 
corrected.
1 Check the low beams and high 
beams, as well as the parking lamps
2 Door open
3 Luggage compartment lid open
4 Check tail or brake lamps
When you open the driver's door after 
parking, a signal sounds to remind you 
if the headlamps have not been 
switched off.
Mode selectionWith ignition key in position 1 or 2, you 
can request information from the 
computer using the button in the turn 
signal lever. By pressing the button 
briefly toward the steering column, you 
can call up a new function for display.
The displays appear in the following 
order:
Time, outside temperature, average fuel 
consumption, cruising range, average 
vehicle speed.
Starting with ignition key position 1, 
the last active setting is displayed.
ClockIf you wish to have a permanent time 
display, you can make this adjustment 
in the radio display (refer to the Radio 
Owner's Manual).
You can adjust the clock and the time 
display in the car radio as follows.