Downloaded from www.Manualslib.com manuals search engine 91-47
- Pull radio out from instrument panel.
- Disconnect electrical connections and antenna
wire.
- Pull out release tool from the radio - to do this,
press in the locking tabs at top and bottom on
radio.
Installing
- Reconnect electrical connections and antenna
wire.
- Carefully insert radio into instrument panel and
let it engage in installation slot.
- Code radio if replacement unit is installed. Use
VAS 5051 Vehicle Diagnostic, Testing and
Information System in mode "Guided Fault
Finding". Audi A4 Sedan 2002-2004, Audi A4 Avant 2002-2004, Audi A4 Cabriolet 2003-2004 - Communication
Downloaded from www.Manualslib.com manuals search engine 91-67
Antenna Selection Control Module -
J515- (Sedan), removing and installing
Removing
- Remove rear headliner trim.
Repair Manual, Body Interior, Repair Group
70
Note:
Illustration shows antenna selection control module on vehicle without
radio remote control for auxiliary heater.
Installing - Disconnect Ground (GND) lead -1-.
- Release clasps -arrows- and remove control module -3-.
- Disconnect electrical connections -2-.
- Install in reverse order of removal.
- Reconnect the electrical connections according to the color-coding on
the control module for antenna selection.
Audi A4 Sedan 2002-2004, Audi A4 Avant 2002-2004, Audi A4 Cabriolet 2003-2004 - Communication
