2002 Acura RSX cooling

CONT INUED
The main air flow comes out
of the dashboard vents.
The main air f low is directed
to the floor vents. In AUTO mode, the system controls
the air f low direction automatically
between the dashboard vents and
the f loor vents. The main air f low is divided
between the f loor vents and
defroster vents at the base of the
windshield.
The main air f low is directed
to the windshield for faster defrost-
ing or def ogging. To def rost or def og
more quickly, turn the temperature
control dial to maximum. Select and set the f an speed to high.
If there is actual frost on the win-
dows, f irst select the Recirculation
mode. If the windows are f ogged,
select the Fresh Air mode. Warmed
air will then f low f rom the wind-
shield and side def roster vents. When you select or ,
the A/C turns on automatically to
help dehumidif y the air and def og
the windshield. When you select
another mode, the A/C stays on. If
you do not want to use the A/C in
that mode, press the button to turn it
off.
Comf ort and Convenience Feat ures
Heating and Cooling
107

Theheatingandcoolingsystemhas
temperature sensors located next to
the steering column and in the top of
the dashboard. Do not cover the
sensors or spill any liquid on them. T emperature Sensors
Heating and Cooling
Comf ort and Convenience Feat ures108

Many states and Canadian provinces
require special outside mirrors when
towing a trailer. Even if they don’t,
you should install special mirrors if
you cannot clearly see behind you, or
if the trailer creates a blind spot.
Askyourtrailersalesorrental
agency if any other items are
recommended or required f or your
towing situation.When preparing to tow, and bef ore
driving away, be sure to check the
f ollowing:
The vehicle has been properly
serviced, and the tires, brakes,
suspension, and cooling system
are in good operating condition.
Allitemsonandinthetrailerare
properly secured and cannot shif t
while you drive.
The lights and brakes on your
vehicle and the trailer are working
properly. Your vehicle tires and spare are
properly inf lated (see page ),
and the trailer tires and spare are
inflated as recommended by the
trailer maker.
Thehitch,safetychains,andany
other attachments are secure. All weights and loads are within
limits (see page ). 235
187
Pre-T ow Checklist
Additional Trailer Equipment
Towing a Trailer
Driving190

This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of
yourself .
If you have the skills and tools to per-
f orm more complex maintenance
tasks on your Acura, you may want
to purchase the Service Manual. See
page f or inf ormation on how to
obtain a copy, or see your Acura
dealer. This section explains why it is
important to keep your car well
maintained and to f ollow basic
maintenance saf ety precautions.......................
Maintenance Saf ety .194
.
Important Safety Precautions . 195
.................
Maintenance Schedule . 196
...
Required Maintenance Record . 203
.......
Owner Maintenance Checks . 205
..............................
Fluid Locations .206
......................................
Engine Oil .207
..................................
Adding Oil .207
....................
Recommended Oil .207
..............................
Synthetic Oil .209
....................................
Additives .209
.....
Changing the Oil and Filter . 209
.............................
Cooling System .212
............
Adding Engine Coolant . 212
.......
Replacing Engine Coolant . 214
....................
Windshield Washers .216
.......................
Transmission Fluid .217
Automatic .........................
Transmission .217
..............
Manual Transmission . 219
................
Brake and Clutch Fluid . 219
............................
Brake System .220
...........................
Clutch System .220
..............................
Power Steering .221
.....................
Air Cleaner Element .222
....................................
Hood Latch .224 ....................................
Spark Plugs .224
..............................
Replacement .224
............................
Specif ications .226
...........................................
Battery .226
.................................
Wiper Blades .229
..............
Air Conditioning System . 231
..................
DustandPollenFilter . 232
.....................................
Drive Belts .234
...............................................
Tires .235
......................................
Inf lation .235
..................................
Inspection .236
..............................
Maintenance .237
.............................
Tire Rotation .238
...
Replacing Tires and Wheels . 239
......................
Wheels and Tires .240
..........................
Winter Driving .240
.............................
Snow Tires .241
............................
Tire Chains .241
.............................................
Lights .242
.....................
Headlight Aiming .244
........................
Replacing Bulbs .244
...........................
Storing Your Car .252
306
Maintenance
Maint enance193

If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to the MAX line.
Inspect the cooling system f or leaks.
This coolant should always be a
mixtureof 50percentantifreezeand
50 percent water. Never add straight
antif reeze or plain water. Always use Honda All Season
Antif reeze/Coolant Type 2. This
coolant is pre-mixed with 50 percent
antif reeze and 50 percent water. It
does not require any additional
mixing. If it is not available, you may
use another major-brand non-silicate
coolant as a temporary replacement.
Make sure it is a high-quality coolant
recommended f or aluminum engines.
However, continued use of any non-
Honda coolant can result in
corrosion, causing the cooling
system to malf unction or f ail. Have
the cooling system f lushed and
ref illed with Honda antif reeze/
coolant as soon as possible.
A dding Engine Coolant
Cooling Syst em
Maint enance212
M M
I
INN
M
M
A
AX
X
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.

Make sure the engine and
radiator are cool.
Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.
Remove the radiator cap by
pushing down and turning
counterclockwise.Put the radiator cap back on.
Tighten it f ully. The coolant level should be up to
the base of the f iller neck. Add
coolant if it is low.Pour coolant into the reserve tank.
Fill it to half way between the MAX
and MIN marks. Put the cap back
on the reserve tank.
Do not add any rust inhibitors or
other additives to your car’s cooling
system. They may not be compatible
with the coolant or engine compo-
nents. 6.
5. 4.
2.
3. 1.
Cooling Syst em
Maint enance213
R RA
A D
DI
IAA T
TO
OR R C
CAA P
P
R
REES
SE ER
RV V E
E T
TA
A N
NK K

Openthehood.Makesurethe
engine and radiator are cool to the
touch.
Remove the radiator cap.
Thecoolingsystemshouldbe
completely drained and ref illed with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Honda All Season Antif reeze/
Coolant Type 2.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled mechanic.
Remove the cover under the
radiator.
Turn the ignition ON (II). Turn
the temperature control dial to
maximum heat. Turn the ignition
off.
1.
2.
3. 4.
Cooling Syst em
Maint enance
Replacing Engine Coolant
214
C CO
OV VE
ER
R

CONT INUED
Pour Honda All Season
Antif reeze/Coolant Type 2 into
the radiator up to the base of the
f iller neck. This coolant is a
mixture of 50 percent antif reeze
and 50 percent water. Pre-mixing
is not required.
Loosen the drain plug on the
bottom of the radiator. Drain the
coolant into an appropriate
container.
When the coolant stops draining,
tightenthedrainplugatthe
bottom of the radiator. Remove the clip, then remove the
reserve tank drain cap. Drain the
coolant into an appropriate
container.
Install the reserve tank drain cap
and clip.
5.
6.
7.8.
Cooling Syst em
Maint enance215
F FI
ILLL LEE R
R N
NEEC
CK K
C
CL LIIPP
D
D R
RAA I
INN
C
CA A P
P
D
D R
RAA I
INN P
PL
LUUG G
F
Fiillll u
u p
p t
too h
he
erree