2002 Acura CL headlight bulb

This light comes on with the high
beam headlights. See page for
inf ormation on the headlight
controls.
On Canadian models, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page ).
This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch of f and the
parking brake set. It should go of f if
youturnontheheadlightsorrelease
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
The lef t or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page ). Replace the bulb as
soon as possible, since other drivers
cannot see that you are signalling.
WhenyouturnontheHazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the car should f lash.
The appropriate light comes on in
this display if the trunk or either
door is not closed tightly with the
ignition switch ON (II). 65
67
257
Canadian models only
High Beam Indicator
‘‘Daytime Running
Lights’’ Indicator
Turn Signal and
Hazard Warning
Indicators
Door and T runk Open Monitor
Indicator L ights
Inst rument s and Cont rols58

If you have the skills and tools to per-
f orm more complex maintenance
tasks on your Acura, you may want
to purchase the Service Manual. See
page f or inf ormation on how to
obtain a copy, or see your Acura
dealer. This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of
yourself . This section explains why it is
important to keep your car well
maintained and to f ollow basic
maintenance saf ety precautions.......................
Maintenance Saf ety .206
.
Important Safety Precautions . 207
.................
Maintenance Schedule . 208
...
Required Maintenance Record . 215
.......
Owner Maintenance Checks . 217
..............................
Fluid Locations .218
......................................
Engine Oil .219
..................................
Adding Oil .219
....................
Recommended Oil .219
..............................
Synthetic Oil .220
....................................
Additives .220
.....
Changing the Oil and Filter . 221
.............................
Cooling System .223
............
Adding Engine Coolant . 223
.......
Replacing Engine Coolant . 225
....................
Windshield Washers .229
....
Automatic Transmission Fluid . 230
....................................
Brake Fluid .231
............................
Brake System .231
..............................
Power Steering .232
....................................
Hood Latch .233
.....................
Air Cleaner Element .233
....................................
Spark Plugs .235
..............................
Replacement .235
............................
Specif ications .237
...........................................
Battery .238 .................................
Wiper Blades .241
..............
Air Conditioning System . 243
..................
Dust and Pollen Filter . 244
.....................................
Drive Belts .244
....................................
Timing Belt .245
...............................................
Tires .245
......................................
Inf lation .245
..................................
Inspection .247
..............................
Maintenance .248
.............................
Tire Rotation .248
...
Replacing Tires and Wheels . 249
......................
Wheels and Tires .250
..........................
Winter Driving .250
.............................
Snow Tires .251
............................
Tire Chains .251
.............................................
Lights .252
.....................
Headlight Aiming .254
........................
Replacing Bulbs .254
...........................
Storing Your Car .263
321
Maintenance
Maint enance205

Check the f ollowing:
If you f ind any bulbs are burned out,
replace them as soon as possible.
Refer to the chart on page to
determine what type of replacement
bulb is needed.Headlights (low and high beam)
Road lamps
Parking lights
Taillights
Brake lights
Turn signals
Back-up lights
Hazard light f unction
License plate light
Side marker lights
High-mount brake light
Daytime running lights (Canadian
models)
307
Lights
Maint enance253
H HI
IGGH H-
-M
M O
OUUNNTT B
BRRAA K
KEE L
LIIGGH HT
T
T
T U
UR RNN S
SIIGGN NAAL
L L
LIIGGH HT
T B
BAA C
CKK--U
UP P L
LIIGGH HT
T
L
LIICCE EN
NS SEE P
PL
LAA T
TE
E L
LIIGGH HT
T
S
ST TO
OP P/
/T
T A
A I
ILL/ /S
SI IDD E
E M
M A
AR
RKKEER
R L
LIIGGH HT
TS
S S
ST
TO
OP P/
/T
T A
A I
ILLL LIIGGH HT
TS
S

Halogen bulbs are used f or the high
beam headlight bulbs. When
replacing a high beam headlight bulb,
handle it by its base and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch of f
and the key removed. Because of
this, you should not attempt to
examine or change a low beam
headlight bulb yourself . If a low
beam headlight bulb fails, take the
cartoyourdealertohaveitreplaced.
Theheadlightswereproperlyaimed
when your car was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment of the
headlights should be perf ormed by
an Acura technician or other
qualif ied mechanic.
Lights
Maint enance
Replacing a High Beam Headlight
Bulb
Headlight A iming
254
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
(Driver’s side)
Reinstall the radiator reserve tank.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Open the hood.
If you need to change a bulb on
the driver’s side, remove the
radiator reserve tank.
Remove the electrical connector
f rom the bulb by squeezing the
connector to unlock the tab, then
slide the connector of f the bulb.
3.
4. 5.
6.
7.
1.
2.
Lights
Maint enance255
B BU
UL LBB
T
T A
A B
B

Use a f lat-tipped screwdriver to
remove the three holding clips
f rom the splash shield. Pull the
splash shield down.
Remove the socket by turning it
one-quarter turn counterclockwise.Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.Put the splash shield in place.
Reinstall the three holding clips.
Lock each clip in place by pushing
on the center.
Insert the socket and turn it one-
quarter turn clockwise to lock it in
place. Turn on the headlights to test the
new bulb.
3.
4. 5.
6.
1.
2.
Lights
Maint enance
Replacing a Road Lamp Bulb
256
H H O
OL LDD I
INNG G C
CLLIIPP S
S

If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.Use a f lat-tipped screwdriver to
remove the two holding clips f rom
the inner f ender.
Pull the inner f ender cover away
f rom the f ender and bumper.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.To remove the f ront turn signal/
parking light bulb, push it in
slightly and turn it
counterclockwise. To remove the
side marker bulb, pull it straight
out of its socket.
Install the new bulb into the
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Put the inner f ender cover in place.
Install the two holding clips. Lock
each clip in place by pushing on
the center.
1.
2.
3.
4.5.
6.
7.
8.
9.
Lights
Maint enance
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
257
H H
O
OL LDD I
INNG G
C
CL LIIPP S
S

µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
µ
Î
Î
Î
Î
Î
Î Î
Î
Î
Î
T echnical Inf ormation
Specif ications
307
Fuses Battery Engine
Tires Alignment
Lights
12 V
12 V60 W (HB3)
24/2.2 CP
12 V
12 V 21 W
21/5 W
Interior
Under-hood Capacity 12 V 65 AH/20 HR12 V 1.1 W
2CP
12 V 5W
12 V 7W
12 V 3CP 21 W
12 V
12 V 5W
21 W
12 V
12 V 6CP(5W)
12 V
12 V 12 V
5W
21/5 W Water cooled 4-stroke
SOHC VTEC 6-cylinder (V6) gasoline engine
Type
BorexStroke
Displacement
Compression ratio
Spark plugs 196 cu-in (3,210 cm
)
3.50 x 3.39 in (89.0 x 86.0 mm)
9.8 : 1
10.5 : 1
60 psi (420 kPa , 4.2 kgf/cm
)
Size
Pressure Toe
Camber
Caster
32 psi (220 kPa , 2.2 kgf/cm)
T135/80R16 101M P215/50R17 93V P205/60R16 91V 2°50’
0°30’0°
0.08 in (2.0 mm)
0.00 in (0.0 mm)
12 V 2 CP
Headlights (High beam)
Front turn signal/parking lights
Rear turn signal lights
Stop/Taillights
Stop/tail/side marker lights
Road lamps
High-mount brake light
Front side marker lights
Back-up lights
License plate light
Ceiling light
Spotlights
Trunk light
Door courtesy lights
Vanity mirror light
Glove box light
See spark plug maintenance
section page
237.
See pages 298and 299or the fuse
label attached to the inside of the
fuse box door on each side of the
dashboard.
See page 297or the fuse box
cover. Front
Rear
Front
Rear
Front
in
Low beam headlight bulbs are a type of high voltage discharge tube
(D2R).
Front/Rear
Spare
Front/Rear
Spare
1:
2:
1:
2: Premium model
Type-S
Premium model
Type-S
1
1 1
2
1
2