2002.5 Peugeot Boxer radio

16-09-2002
YOUR BOXER IN DETAIL59
Button Function
O Pick up (Incoming call / Not in communication) - Hang up (In communication). Pressing for more than 1 second: Hang up (Incoming call).
P 
Selection of the previous CD (CD changer).
Q

Selection of the next CD (CD changer).
R 
Automatic search for a lower frequency (radio) - Selection of the previous track (CD).
S
 Play / Stop (CD).
Pressing for more than 1 second: pause (CD) - Inputting of international indicator (Tel).
T 
Automaitc search for a higher frequency (radio) - Selection of the next track (CD).
1 to 6 1 2 3 4 5 6 Selection of the stored station. Pressing for more than 1 second: storing of a station.
1 to 9 1 2 3 4 5 Selection of the stored telephone number.
6 7 8 9 Pressing for more than 1 second: storing of a telephone number.
0 to 9 * #0 1 2 3 4 5 Numeric keypad for entering the PIN and telephone numbers.
6 7 8 9 * #

16-09-2002
YOUR BOXER IN DETAIL
60
GENERAL FUNCTIONS On / Off With the ignition key in the "ON"position, the audio/telephone/GPS comes on automatically.
Switching off is also automatic when the key is turned to the "STOP"position.
Y ou can also switch the audio/telephone/GPS on or off manually by pressing knob B.
In this case, the audio/telephone/GPS can operate for 20 minutes without the ignition being switched on. Notes:- the SIM card must only be removed or inserted after switching off the audio/telephone/GPS,
- when the audio-telephone/GPS is switched off after 20 minutes, communication is possible by pressing button O.
- after the ignition has been swiched off, the audio/telephone/GPS can be switched on again by pressing button Lor Oor
by inserting a CD in the player.
Anti-theft system The audio/telephone/GPS is coded so that it can only operate in your vehicle. If it is installed in another vehicle, contact yo ur
PEUGEOT dealer to have the system configured. The anti-theft system is automatic and does not require any intervention on your part. VOLUME ADJUSTMENT T urn knob Bclockwise to increase the volume of the audio-telephone/GPS or anti-clockwise to decrease the volume.
Note: the volume setting is specific to each source. It is posible to have a different setting for the radio, CD, CD changer,
telephone or voice messages.
SOUND CUT-OFF/ RESTORATION
To gradually restore or cut off the volume of an audio source, press the "AUDIO OFF"button.
To gradually restore or cut off the volume of the navigation source voice messages, press the "NAV MUTE"button for more
than one second. Note: during telephone calls, the volume of the other sources is cut off automatically.

16-09-2002
YOUR BOXER IN DETAIL61
AUDIO SETTINGS Select the audio source (radio, CD or CD changer) for which you wish to adjust the settings by pressing the "SRC"button
repeatedly. Select the "Audio Setup" function from the audio source menu by turning knob H, then press this knob to confirm.
Y ou will then gain access to the treble, bass, loudness, equalizer, manual equalizer, automatic volume adjustment and balan-
ce/fader settings. Tr eble adjustment
Select the "Treble" function from the "Audio Setup"menu by turning knob H, then press this knob to confirm.
T urn knob Hto the right for the maximum treble setting.
Leave the cursor in the medium position for a normal setting. T urn knob Hto the left for a minimum treble setting.
Following adjustment, press knob Hto confirm the change.
Bass adjustment Select the "Bass" function from the "Audio Setup"menu by turning knob H, then press this knob to confirm.
T urn knob Hto the right for the maximum bass setting.
Leave the cursor in the medium position for a normal setting. T urn knob Hto the left for a minimum bass setting.
Following adjustment, press knob Hto confirm the change.
Activation/deactivation of the loudness
This function permits automatic accentuation of the bass and treble when the volume is low. Select the "Loudness" function from the "Audio Setup" menu by turning knob H, then press this knob to confirm.
T urn knob Hto select "YES"or "NO" .
When the selection has been made, press knob Hto confirm the change.

16-09-2002
YOUR BOXER IN DETAIL63
RADIO SOURCE Radio source and waveband selection Press button "SRC" repeatedly to select the required waveband FM1, FM2, FM3, LW and MW.
The corresponding symbol appears on the display. Manual station search Select the "Frequency" function from the "Radio" audio source menu by turning knob H, then press this knob to confirm.
T urn knob Hto the right to search for a higher frequency or to the left to search for a lower frequency.
Automatic station search Select the "Frequency" function from the "Radio"audio source menu by turning knob H, then press this knob to confirm.
Press respectively button Rto search for a lower frequency or button Tto search for a higher frequency.
The message "SEEK"appears during the search, then scanning stops when the first station is found.
If the traffic information programme TAor the PTYfunction is active, only stations which broadcast this type of programme
are selected. The station search is carried out first with "LOC"sensitivity (selection of the most powerful transmitters) for one scan of the
waveband, then with "DX"sensitivity (selection of the weakest and most distant transmitters).
To carry out a "DX"sensitivity search straight away, select the "LOC/DX"function from the "Radio" audio source menu by
turning knob H, then press this knob repeatedly to change the sensitivity. The corresponding symbol appears on the display.

16-09-2002
YOUR BOXER IN DETAIL
64
Manual station storing Select the required station. Press and hold one of the buttons "1"to "6" for more than one second.
A bleep is heard, confirming that the station has been stored.
Automatic station storing (Autostore) Select the "Autostore" function from the "Radio" audio source menu by turning knob H, then press this knob to begin sto-
ring. Y our audio/telephone/GPS automatically stores the 6 best transmitters received on the waveband selected.
If it was not possible to find 6 transmitters, the remaining memories are not changed. Recalling stored stations On each waveband, a brief press of one of the buttons "1"to "6" recalls the corresponding stored station.
Stereo/Mono receptionSelect the "St/Mono" function from the "Radio" audio source menu by turning knob H, then press this knob repeatedly to
change the type of reception. The corresponding symbol appears on the screen.

16-09-2002
YOUR BOXER IN DETAIL65
RDS SYSTEM Using the RDS function on the FM waveband The RDS (Radio Data System) enables you to continue listening to the same station irrespective of the frequency which it
uses in the region in which you are travelling. Select the "TA/AF"function from the "Radio" audio source menu by turning knob H, then press this knob repeatedly to acti-
vate the AF function.
The corresponding symbol appears on the screen. RDS station following
The display indicates the name of the station selected. The audio/telephone/GPS continuously searches for the transmitter which broadcasts the same programme with the best reception. T raffic information programme
Select the "TA/AF"function from the "Radio" audio source menu by turning knob H, then press the knob repeatedly to acti-
vate the TAfunction.
The corresponding symbol appears on the display.
If the station is able to transmit traffic information, the symbol "TP"is displayed following activation of the TAfunction.
All traffic information bulletins will be given priority irrespective of the audio source in use (radio, CD or CD changer).If you wish to interrupt a message, select the "TA/AF"function by turning knob H, then press this knob repeatedly to deac-
tivate the TAfunction.
The corresponding symbol appears on the display.Note: the traffic information volume is independent of the normal audio/telephone/GPS volume. You can set it by means of
knob Bduring a message.

16-09-2002
YOUR BOXER IN DETAIL
66
PTY function This enables you to listen to stations which transmit a themed programme (Info, Culture, Sport, Rock...). When FM is selected, select the "TA/AF"function by turning knob H, then press this knob repeatedly to activate the PTY
function.The list of programme types appears on the screen.
To search for a PTYprogramme:
- activate the PTYfunction,
- turn knob Hto scroll through the list of programme types offered,
- when the programme of your choice is displayed, press the knob, - press button Ror Tto carry out an automatic search for the type of programme selected.
In PTY mode, the programme types can be stored. To do this, press and hold the preselection button "1"to "6" for more
than one second. The stored programme type is recalled by a shorter press of the corresponding button.
EON system
This system links stations belonging to the same network. It enables you to listen to traffic information or a PTYprogramme
transmitted by a station belonging to the same network as the station to which the radio is tuned. The "EON"symbol appears
on the display.
To take advantage of it, select the traffic information programme TAor the PTYfunction.

16-09-2002
YOUR BOXER IN DETAIL
78
Voice commands
The voice commands enable you to control a certain number of audio/telephone/GPS functions using pre-recorded words or expressions. The voice commands which you can send to the system are divided into two categories: - voice commands without voice identification which permit selection of the system's modes (TEL, RADIO, CD, ...),
- voice commands with voice identification which relate to the entering / recalling of names in the telephone directory
and/or navigation addresses.
Activation / Deactivation of the voice commands Press button Non the audio/telephone/GPS control panel or control 4on the steering wheel to activate or deactivate this
function. Notes: - in the absence of voice commands, this function will be deactivated after approximately ten seconds,
- if a voice command is not understood, a double bleep is emitted.
- the voice command operations are interrupted immediately if an incoming call is received; in this case, when the call ends, the entire operation must be repeated.
Example: to recall the radio station stored on button 3, the key words are: "Radio" "Memory" or"Station" "3" .
To use these key words, you must say the word "Radio", wait for the confirmation bleep, then say the word "Memory"or
"Station" , wait until the system asks "number please?", then end with the word "3", wait for the confirmation bleep which will
carry out the action requested. List of recognisable commands available The voice commands (key words) which can be recognised by the system are organised into three levels (levels 1, 2 and 3). When a level 1 command is given, the system makes the level 2 commands available; when a level 2 command is given, the system makes the level 3 commands available. - the level 1 commands are the following:
"MEMO" / "RADIO" / "CD PLAYER" / "NAVIGATION" / "CALL" / "DIAL" / "REDIAL" / "PIN" / "DIRECTORY" / "INTERRUPT"