PRACTICAL INFORMATION
156
USING ROOF BARS
To use the transverse roof bars, release the four locking levers provi ded for this
purpose.
Slide them in their rails to the appropriate position.
Lock the four locking levers located at the base of the feet of each bar.
Note: when the roof bars are not in use, position them at the rea r stop to avoid
excess consumption.
Use accessories approved by Automobiles PEUGEOT and follow the manufa c
turer's fitting instructions.
Maximum authorised weight on the roof rack 220 lbs. (100 k g)Removal and refitting of the
roof bars
– Remove the bolt, the stop and the two washers at each location A.
– Move the bars to the locations A.
– Lift the two bars to remove them.
– Imperative: refit the bolt, the stop
and the two washers at each loca
tion A.
To refit, proceed in the reverse order.
Direction of use:
18-11-2002
