Page 4 of 156
83
4YOUR 206 AT A GLANCE
24-02-2003
KEYS The keys allow you to indepen- dently operate the locks on thefront doors and the tailgate(saloon), the passenger airbagdisarming switch, the fuel fillercap and the steering lock. Central locking
From the driver's door, you can lock and unlock the doors andthe tailgate. If one of the doors, the tailgate (206 SW) or the rear screen(206 SW) is open, the centrallocking does not work.Remote control Pressing button
Aremotely locks
the vehicle. This is confirmed by fixed lighting of the direction indica-tors for approximately two sec-onds. Pressing button Bremotely
unlocks the vehicle. This is confirmed by rapid flash- ing of the direction indicators forapproximately two seconds.
206 SW: Pressing and holding
button Bunlocks the vehicle and
opens the rear screen. Leaving the ignition key in If you leave the key in the igni- tion, a buzzer reminds you of this
when opening the driver's door. Locating the vehicle
To locate your vehicle, when you have left it locked in a car park: press button A, the courtesy
lights will come on and the indicator lights flash for a fewseconds. STARTING The 4 positions of the key in the ignition:
STOP position:
The ignition is
off.
1st notch, Accessories posi- tion: The ignition is off but the
accessories can be used. 2nd notch, Running position: The ignition is on. Starting position: Operates the
starter. Steering lock Before starting, unlock the steer-
ing if necessary, by gently turningthe steering wheel at the same
time as you turn the key. It is advisable to press the clutch
pedal while operating the starter,
to make starting easier.
Page 5 of 156
83
4YOUR 206 AT A GLANCE
24-02-2003
KEYS The keys allow you to indepen- dently operate the locks on thefront doors and the tailgate(saloon), the passenger airbagdisarming switch, the fuel fillercap and the steering lock. Central locking
From the driver's door, you can lock and unlock the doors andthe tailgate. If one of the doors, the tailgate (206 SW) or the rear screen(206 SW) is open, the centrallocking does not work.Remote control Pressing button
Aremotely locks
the vehicle. This is confirmed by fixed lighting of the direction indica-tors for approximately two sec-onds. Pressing button Bremotely
unlocks the vehicle. This is confirmed by rapid flash- ing of the direction indicators forapproximately two seconds.
206 SW: Pressing and holding
button Bunlocks the vehicle and
opens the rear screen. Leaving the ignition key in If you leave the key in the igni- tion, a buzzer reminds you of this
when opening the driver's door. Locating the vehicle
To locate your vehicle, when you have left it locked in a car park: press button A, the courtesy
lights will come on and the indicator lights flash for a fewseconds. STARTING The 4 positions of the key in the ignition:
STOP position:
The ignition is
off.
1st notch, Accessories posi- tion: The ignition is off but the
accessories can be used. 2nd notch, Running position: The ignition is on. Starting position: Operates the
starter. Steering lock Before starting, unlock the steer-
ing if necessary, by gently turningthe steering wheel at the same
time as you turn the key. It is advisable to press the clutch
pedal while operating the starter,
to make starting easier.
Page 18 of 156
24-02-2003
SPECIAL FEATURES Some of your vehicle's vital components have specific servicing schedules. The air bags and the pretensioning seat belts must be checked every 10 years.
The brake fluid must be replaced every 60,000 km or every 2 years.
The pollen filter must be checked at each visit to the PEUGEOT dealer (intermediate visits and regular services).
The timing belt : consult your PEUGEOT dealer.
PEUGEOT SERVICING 19
Arduous conditions of use If the vehicle is used in certain particularly arduous conditions:
¥Continuous door-to-door use.
¥ Town use (e.g. taxi).
¥ Repeated short journeys, with the engine cold in low temperatures.
or in long stays in the following conditions: ¥ Hot countries with temperatures often above 30 ¡C.
¥ Cold countries with temperatures often below minus 15 ¡C.
¥ Countries with a dusty atmosphere.
¥ Countries whose lubricants or fuels do not conform to our recommendations.
It is necessary to follow an "Arduous conditions" servicing schedule, which includes special operations and shorter service intervals: ¥ Every 20,000 km or every year for petrol engine vehicles.
¥ Every 15,000 km or every year for Direct Injection Diesel engine vehicles.
¥ Every 10,000 km or every year for Indirect Injection Diesel engine vehicles.
Page 21 of 156
24-02-2003
TYPES OF SERVICE Each vehicle has its own servicing cycle, based upon the engine type.
This cycle consists of alternating two types of service, A and C, intermediate visits and a few additional operations depending on your vehicle; these correspond to key stages in the life of your 206.
Type B services are designed for less recent vehicles.When the first service is carried out and at each subsequent service, your dealer will advise you of the type and content of the next service due.
PEUGEOT SERVICING
22
THE MAINTENANCE CYCLE FOR YOUR 206 PETROL
Service every 30,000 km or 2 years.
1st service at 10,000 km or 6 months*.
This is necessary
in order to benefit from the warranty
Automatic gearbox oil level every 60,000 km These services are carried out with synthetic based oil; Fuel Economy oil or
synthetic oil may also be used. * Whichever comes first.
Intermediate visit.
KM 30,000 60,000 90,000 120,000
150,000 180,000 210,000 240,000 270,000
Page 22 of 156
24-02-2003
PEUGEOT SERVICING
24
I
ntermediate visit.
THE MAINTENANCE CYCLE FOR YOUR 206 INDIRECT INJECTION DIESEL
Service every 15,000 km or 2 years.
1st Service at 10,000 km or 6 months*
This is necessary inorder to benefit
from the warranty
These services are carried out with synthetic based oil; Fuel Economy oil or
synthetic oil may also be used. * Whichever comes first.
KM 15,000 30,000 45,000 60,000 75,000
90,000 105,000 120,000 135,000 150,000 165,000
Page 23 of 156
24-02-2003
PEUGEOT SERVICING23
Intermediate visit.
THE MAINTENANCE CYCLE FOR YOUR 206 TURBO DIESEL HDI
Service every 20,000 km or 2 years.
1st Service at
10,000 km or 6 months*. This is necessary in order
to benefit from the warranty
These services are carried out with synthetic based oil; Fuel Economy oil or
synthetic oil may also be used. Do not use synthetic based oil for the 1.4 litre HDI Diesel engine. * Whichever comes first.
KM 20,000 40,000 60,000 80,000 100,000
120,000 140,000 160,000 180,000 200,000 220,000 240,000
Page 24 of 156
PEUGEOT SERVICING25
PEUGEOT SERVICING
Level
Operations Description of operations1st serviceACIntermediate visit
DRAIN AND REFILL- Engine oil. - Bleed fuel filter (diesel only). - Oil filter. - Fuel filter (petrol). REPLACE- Fuel filter (diesel). - Air filter element. - Spark plugs (petrol). - Engine oil (check + top up). - Manual gearbox oil (check + top up). - Battery (check + top up) if cap is removable. LEVELS- Front/rear screen-wash. - Coolant (check + top up). - Brake fluid (check + top up). - Power steering fluid (check + top up, according to specification). - Operation of lights and indicators. - Condition of glass, headlamp and light lenses and mirrors. - Horn. - Windscreen washer jets. - Condition of wiper blades. - Condition and tension of the ancillary drive belts. - Handbrake. - Condition of hydraulic circuits (hoses and covers) and check for leaks. CHECK- Condition of rubber boots and gaiters. - Brake pad wear. o- Play in hubs, link rods, ball joints, flexible mountings. - Shock absorbers for leaks. - Rear drum brake lining wear. - Condition and pressure of tyres (including spare wheel). - Emission control check according to current legislation (petrol). - Smoke opacity (diesel). - Pollen filter (according to specification). o- Visual check of the whole vehicle by a Peugeot technician.
SERVICE*- Courtesy vehicle
ROAD TEST
: All driving conditionso: Arduous conditions * According to country.24-02-2003
Page 25 of 156
24-02-2003
(1) Minimum quality standard: Petrol engines ACEA A3 and API SH/SJ; Diesel engines ACEA B3 and API CF/CD. ACEA= Association des Constructeurs EuropŽens Automobiles (Association of European Automobile Manufacturers).
API = American Petroleum Institute. If oil is used which does not conform to the ACEA A3-B3 standards, this requires the "Arduous Conditions" servicing schedule to be followed, which involves shorter intervals between services.
* This Fuel Economy oil can only be used in engines designed for its use.
Do not use synthetic based oil for the 1.4 litre HDI Diesel engine.
26TRADE NAMES OF APPROVED AND RECOMMENDED ENGINE LUBRICANTS IN EUROPE (1)
PETROL DIESEL DIESEL PETROL
