2001 YAMAHA WARRIOR 350 warning

7-21
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
During operation
Always keep your feet on the footboards dur-
ing operation. Otherwise your feet may contact
the rear wheels.
WARNING

Always keep both hands on the handlebars
and both feet on the footboards of your ATV
during operation. Removing even one hand or
foot can reduce your ability to control the ATV
or could cause you to lose your balance and
fall off of the ATV. If you remove a foot from a
footboard, your foot or leg may come into con-
tact with the rear wheels, which could injure
you or cause an accident.
Avoid wheelies and jumping. You may lose
control of the machine or overturn.
WARNING

Never attempt stunts, such as wheelies or
jumps. Don’t try to show off.

7-23
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
Modifications
WARNING

Never modify this ATV through improper in-
stallation or use of accessories. All parts and
accessories added to this vehicle should be
genuine Yamaha or equivalent components
designed for use on this ATV and should be in-
stalled and used according to instructions. Im-
proper installation of accessories or
modification of this vehicle may cause chang-
es in handling which in some situations could
lead to an accident. If you have questions, con-
sult an authorized ATV dealer.

7-25
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
Exhaust system
The exhaust system on the machine is very hot
during and following operation. To prevent
burns, avoid touching the exhaust system.
Park the machine in a place where pedestrians
or children are not likely to touch it.
WARNING

Do not touch the hot exhaust system. Do not
park the machine during or after operation in a
place where others might be likely to touch it.

7-27
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
BE CAREFUL WHERE YOU RIDE
This machine is designed for off-road use only.
Riding on paved surfaces can cause loss of
control.
WARNING
Always avoid paved surfaces, including side-
walks, driveways, parking lots and streets.
ATVs are designed for off-road use only.
Paved surfaces may seriously affect handling
and control of the ATV, and may cause the ve-hicle to go out of control.
Do not ride on any public road, street, or high-
way.
Riding on public roads can result in collisions
with other vehicles.
WARNING
Never operate this ATV on any public street,
road or highway, even a dirt or gravel one. You
can collide with another vehicle. In many ar-
eas, it is illegal to operate ATVs on publicstreets, roads and highways.

7-29
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
Know the terrain where you ride. Ride cau-
tiously in unfamiliar areas. Stay alert for holes,
rocks, or roots in the terrain, and other hidden
hazards which may cause the machine to up-
set.
WARNING
Go slowly and be extra careful when operating
this ATV on unfamiliar terrain. Always be alert
to changing terrain conditions when operatingthe ATV.
WARNING
Do not operate on excessively rough, slippery
or loose terrain until you have learned and
practiced the skills necessary to control the
ATV on such terrain. Failure to use extra care
when operating on excessively rough, slippery
or loose terrain could cause loss of traction or
vehicle control, which could result in an acci-dent, including an overturn.

7-31
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
When riding in an area where you might not
easily be seen, such as desert terrain, mount a
caution flag on the machine. DO NOT use the
flag pole bracket as a trailer hitch.
WARNING
Always mount a caution flag on the machine
to make you more visible when operating in
areas where you might not be seen by other
off-road vehicles. Watch carefully for other ve-hicles.
Do not ride in areas posted “no trespassing”.
Do not ride on private property without getting
permission.

7-35
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
With the engine idling, pull the clutch lever to
disengage the clutch and shift into 1st gear,
and then release the parking brake. Open the
throttle gradually, and at the same time, re-
lease the clutch lever slowly. Once the ATV has
attained adequate speed, release the throttle
lever and at same time, quickly pull in the
clutch lever and shift into 2nd gear. Open the
throttle part way and gradually release the
clutch. Use this same procedure as you move
into the higher gears. Be sure to coordinate the
use of the throttle and shift pedal properly. If
the throttle is applied too abruptly or if the
throttle is not released during shifting, or if the
shift pedal is not released before applying the
throttle, the front wheels may lift off the
ground resulting in a loss of directional con-
trol. Avoid higher speeds until you are thor-
oughly familiar with the operation of your ATV.
WARNING
Always open the throttle gradually and re-
lease the clutch lever slowly. Otherwise, the
machine could wheelie which would increasethe chance of an accident.

7-37
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-7.frame
EL
CAUTION:Do not shift gears without releasing the throt-
tle. Damage to the engine or drive train mayoccur.
When slowing down or stopping, release the
throttle and apply the brakes smoothly and
evenly. As you slow down, shift to a lower
gear. Be sure that the engine has sufficiently
slowed before engaging a lower gear. Improp-
er use of the brakes or shifting can cause the
tires to lose traction, reducing control and in-
creasing the possibility of an accident.
WARNING
Make sure the engine has sufficiently slowed
before shifting to a lower gear. Engaging a
lower gear when the engine speed is too highcould cause the wheels to stop rotating.