2001 YAMAHA WARRIOR 350 headlight bulb

Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350TOC-E.frame
EL
Drive chain cleaning and
lubrication....................................... 8-61
Cable inspection and lubrication .... 8-63
Brake and shift pedal/brake and
clutch lever lubrication .................. 8-63
Upper and lower arm pivot
lubrication....................................... 8-65
Rear arm pivot lubrication............... 8-67
Wheel removal ................................. 8-69
Wheel installation ............................ 8-71
Battery ............................................... 8-73
Replenishing the battery fluid ......... 8-77
Fuse replacement ............................. 8-81
Replacing the headlight bulb .......... 8-83
Headlight beam adjustment ............ 8-89
Troubleshooting ............................... 8-91
Troubleshooting chart ..................... 8-93
CLEANING AND STORAGE................... 9-1
A. Cleaning ......................................... 9-1
B. Storage ........................................... 9-7SPECIFICATIONS ..................................10-1
HOW TO USE THE CONVERSION
TABLE ....................................................11-1
9
1011

8-83
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
EBU00599
Replacing the headlight bulb
If the headlight bulb burns out, replace the
bulb as follows:
1. Remove the headlight assembly together
with the guard by removing the bolts.
2. Disconnect the connectors.
1. Bolt (´ 3)
1. Boulon (´ 3)
1. Perno (´ 3)1. Connector
1. Connecteurs
1. Conector

8-87
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
5. Remove the bulb holder cover.
6. Turn the bulb holder counterclockwise
and remove the defective bulb.
WARNING
The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the
bulb to cool before touching or removing it.
You can be burned, or a fire could start if thebulb touches something flammable.
1. Bulb holder cover
1. Cache de la fixation d’ampoule
1. Cubierta del portabombillas1. Defective bulb
1. Ampoule défectueuse
1. Lámpara defectuosa

8-89
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
7. Put a new bulb into position and secure it
in place with the bulb holder.
8. Install the bulb holder cover.CAUTION:Make sure the bulb holder cover is securely fit-
ted over the bulb holder and seated againstthe reflector.
9. Install the headlight assembly and the
guard.
Adjust the headlight beam if necessary.
EBU00409
Headlight beam adjustmentCAUTION:It is advisable to have a Yamaha dealer makethis adjustment.
1. Vertical adjustment:
To raise the beam, turn the adjusting
screw clockwise.
To lower the beam, turn the screw coun-
terclockwise.
1. Vertical adjusting screw (´ 2)
1. Vis de réglage vertical (´ 2)
1. Tornillo de ajuste vertical (´ 2)1. Bulb holder cover 2. Bulb holder
3. Reflector
1. Cache de la fixation d’ampoule 2. Fixation d’ampoule
3. Réflecteur
1. Cubierta del portabombillas 2. Portabombillas
3. Reflector

10-5
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-SPEC-E.frame
EL
Shock absorber:
Front
RearCoil spring / Oil damper
Coil spring / Gas-Oil damper
Wheel travel:
Front
Rear200 mm
200 mm
Electrical:
Ignition system
Generator system
Battery type/voltage, capacityC.D.I.
C.D.I. Magneto
GM12CZ-4A-2/12V, 12AH
Headlight type: Krypton bulb
Bulb voltage, wattage
´
quantity:
Headlight
Taillight
Indicator light:
Neutral
Reverse12V, 30W/30W
´
2
12V, 3.8W
´
1
12V, 3.4W
´
1
12V, 3.4W
´
1 MODEL YFM350X