3-2
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
EAU01087
Speedometer unit The speedometer unit is equipped
with a speedometer, an odometer
and a tripmeter. The speedometer
shows riding speed. The odometer
shows the total distance traveled.
The tripmeter shows the distance
traveled since it was last set to zero
with the reset knob. The tripmeter
can be used to estimate the distance
that can be traveled with a full tank of
fuel. This information will enable you
to plan future fuel stops.1. Speedometer
2. Odometer
3. Trip odometer
4. Reset knob
EAU00118
Handlebar switches
EAU00121
Dimmer switch
Set this switch to Ò&Ó for the high
beam and to Ò%Ó for the low beam.1. Lights switch
2. Dimmer switch
3. Turn signal switch
4. Horn switch Ò*Ó
NOTE:
Only for the German model equipped
with a speed limiter:
The speed limiter prevents the motor-
cycle from exceeding a riding speed
of 80 km/h.
4
23 1
41
2
3
5EK-9-E2 (TW125)<3.3Passport> 5/23/00 9:47 AM Page 12
3-3
INSTRUMENT AND CONTROL FUNCTIONS
1
23
4
5
6
7
8
9
EAU00127
Turn signal switch
To signal a right-hand turn, push this
switch to Ò6Ó. To signal a left-hand
turn, push this switch to Ò4Ó. When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
EAU00129
Horn switch Ò*Ó
Press this switch to sound the horn.
EAU00134
Light switch
Set this switch to Ò
'
Ó to turn on
the auxiliary light, meter lighting and
taillight. Set the switch to Ò:Ó to turn
on the headlight also.
EAU00143
Start switch Ò,Ó
Push this switch to crank the engine
with the starter.
EC000005
cCSee page 5-1 for starting instruc-
tions prior to starting the engine.
12
EAU00138
Engine stop switch
Set this switch to Ò$Ó to stop the
engine in case of an emergency,
such as when the motorcycle over-
turns or when the throttle cable is
stuck.1. Engine stop switch
2. Start switch Ò,Ó
5EK-9-E2 (TW125)<3.3Passport> 5/23/00 9:47 AM Page 13
