4 - 52
ENG
OIL PUMP
Oil strainer
1. Inspect:
l
Oil strainer
Cracks/damage
®
Replace.
Contamination
®
Clean the flushing oil.
ASSEMBLY AND INSTALLATION
Oil pump
1. Install:
l
Oil pump housing
1
l
Outer rotor
2
l
Inner rotor
3
l
Pin
4
l
Oil pump shaft
5
l
Pin
6
l
Oil pump cover
7
l
Washer
8
l
Circlip
9
l
Conical spring washer
0
l
Oil pump driven gear
A
l
Circlip
B
l
Screws
C
NOTE:
l
Apply engine oil onto the outer rotor, inner
rotor and oil pump shaft.
l
Install the conical spring washer in the direc-
tion as shown.
2. Install:
l
Oil strainer
l
Gasket
l
Oil pump assembly
l
Screws (oil pump assembly)
NOTE:
Apply engine oil onto the crankcase oil pas-
sage and oil pump assembly.
New
New
T R..5 Nm (0.5 m · kg, 3.6 ft · lb)
New
T R..7 Nm (0.7 m · kg, 5.1 ft · lb)
3. Install:
l
Oil pump drive gear
1
lRotary filter 2
NOTE:
lInstall the oil pump drive gear with its groove
a facing the engine.
lInstall the rotary filter with the dog b facing
out.
lAlign the rotary filter dog b with groove c of
the crankshaft.
