2001 YAMAHA BANSHEE 350 transmission

LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3-1
Identification number records ...............3-3
Key identification number .....................3-5
Vehicle identification number ...............3-5
Model label ...........................................3-7
CONTROL FUNCTIONS .........................4-1
Main switch ...........................................4-1
Handlebar switches ..............................4-3
Throttle lever ........................................4-5
Throttle OverRide System ....................4-7
Speed limiter ........................................4-9
Clutch lever ........................................4-11
4
3
2
1Front brake lever ................................4-11
Rear brake pedal ................................4-13
Parking brake .....................................4-13
Shift pedal ..........................................4-17
Kick starter .........................................4-17
Fuel tank cap ......................................4-19
Fuel cock ............................................4-19
Starter (choke)....................................4-21
Seat ....................................................4-23
Front shock absorber adjustment .......4-25
Rear shock absorber adjustment .......4-27
PRE-OPERATION CHECKS ...................5-1
Front and rear brakes ...........................5-5
Fuel ....................................................5-11
Engine mixing oil ................................5-15
Transmission oil .................................5-17
Chain ..................................................5-19
Throttle lever ......................................5-19
5
EBU00015
CONTENTS

Fittings and fasteners .........................5-19
Lights ..................................................5-21
Switches .............................................5-21
Tires ...................................................5-23
How to measure tire pressure ............5-27
Tire wear limit .....................................5-29
OPERATION ............................................6-1
Starting a cold engine...........................6-3
Starting a warm engine ........................6-9
Warming up ..........................................6-9
Shifting ...............................................6-11
To start out and accelerate.................6-15
To decelerate .....................................6-19
Engine break-in ..................................6-21
Parking ...............................................6-25
Parking on a slope..............................6-27
Accessories and loading ....................6-29
6
Riding Your ATV ......................................7-1
Getting to know your ATV ....................7-3
Ride with care and good
judgement...........................................7-5
Be careful where you ride...................7-27
Turning your ATV ...............................7-41
Climbing uphill ....................................7-45
Riding downhill ...................................7-57
Crossing a slope .................................7-61
Crossing through shallow water .........7-65
Riding over rough terrain ....................7-69
Sliding and skidding ...........................7-71
What to do if .......................................7-75
What to do ..........................................7-75
PERIODIC MAINTENANCE AND
ADJUSTMENT .........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Transmission oil .................................8-17
8
7

Réglage de la flèche de la chaîne de
transmission ......................................8-92
Nettoyage et lubrification de
la chaîne de transmission ..................8-94
Contrôle et lubrification des câbles ....8-96
Lubrification des pédales de sélection et
de frein et des leviers de frein et
d’embrayage .....................................8-98
Lubrification du pivot de bras
supérieur et inférieur.........................8-98
Lubrification de pivot de bras
arrière ..............................................8-100
Dépose des roues ..............................8-102
Repose des roues ..............................8-102
Remplacement de l’ampoule de
phare ...............................................8-104
Réglage du faisceau de phare ...........8-106
Dépannage ........................................8-108
Tableau de dépannage .......................8-113 Entretiens et graissages périodiques ...8-10
Huile de boîte de vitesses ...................8-18
Système de refroidissement ................8-24
Inspection de la bougie .......................8-40
Nettoyage du filtre à air ......................8-44
Réglage des carburateurs ....................8-52
Réglage du ralenti ...............................8-68
Réglage du levier d’accélération ........8-72
Contrôle des plaquettes de frein
avant et arrière ..................................8-74
Contrôle du niveau de liquide de
frein...................................................8-76
Changement du liquide de frein..........8-80
Réglage du jeu du levier de frein
avant..................................................8-82
Réglage du frein arrière ......................8-84
Réglage du frein de stationnement .....8-86
Réglage de l’embrayage .....................8-90
Vérification de la flèche de la chaîne
de transmission .................................8-90

4-17
EBU00082
Shift pedal
This machine is equipped with a constant-mesh
6-speed transmission. The shift pedal is located
on the left side of the engine and is used in com-
bination with the clutch when shifting.
EBU00089
Kick starter
Rotate the kick starter away from the engine.
Push the starter down lightly with your foot until
the gears engage, then kick smoothly and force-
fully to start the engine. This model has a prima-
ry-coupled kick starter so the engine can be
started in any gear if the clutch is disengaged.
However, shifting to neutral before starting is
recommended.
N
1
q
2 3 4 5 6
q
1. Shift pedal N. Neutral
1. Pédale de sélection N. Point mort
1. Pedal del cambio N. Punto muerto
1. Kick starter
1. Pédale de kick
1. Pedal de arranque

5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5 ~ 5-9
9Fill with DOT 4 (or DOT 3) brake fluid if necessary. 8-73 ~ 8-83
Clutch9Check operation, condition and lever free play. 8-89
Parking brake9Check operation, condition and free play. 8-85 ~ 8-87
Fuel9Check fuel level.
9Fill with fuel if necessary.5-11 ~ 5-13
Transmission oil9Check oil level.
9Fill with oil if necessary.5-17, 8-17 ~ 8-23
Coolant reservoir 9Check coolant level.
9Fill with coolant if necessary.8-23 ~ 8-37
Drive chain9Check chain slack and condition.
9Adjust if necessary.5-19, 8-89 ~ 8-93
Throttle9Check for proper throttle cable operation. 5-19, 8-71
Wheels and tires9Check tire pressure, wear and damage. 5-23 ~ 5-29, 8-101
Fittings and Fasteners9Check all fittings and fasteners. 5-19
Lights9Check for proper operation. 5-21, 8-103 ~ 8-105

5-2
FBU00113
CONTRÔLES AVANT LE DÉMARRAGE
Contrôler les points suivants avant de mettre le moteur en marche:
5
DESCRIPTION VÉRIFICATION PAGE
Freins9Contrôler le fonctionnement, le jeu, le nivezu du liquide,
et s’il n’y a pas de fuite. 5-6 ~ 5-10,
9Si necessaire ajouter de liquide de frein DOT 4 8-74 ~ 8-84
(ou DOT 3).
Embrayage9Contrôler le fonctionnement, l’état et le jeu du levier. 8-90
Frein de stationnement9Contrôler le fonctionnement, l’état et le jeu. 8-86 ~ 8-88
Carburant9Contrôler le niveau de carburant.
9Ajouter du carburant si nécessarire.5-12 ~ 5-14
Huile de boîte de vitesses9Contrôler du niveau d’huile.
9Ajouter de huile si nécessaire.5-18, 8-18 ~ 8-24
Vase d’expansion 9Contrôler du niveau de liquide de refroidissement.
8-24 ~ 8-38
9Ajouter de liquide de refroidissement si nécessaire.
Chaîne de transmission9Contrôler la tension et l’état de la chaîne.
9Régler si nécessaire.5-20, 8-90 ~ 8-94
Accélérateur9Vérifier le fonctionnement des câbles d’accélérateur. 5-20, 8-72
Roues et pneus9Contrôler la pression, l’usure et l’endommagement des
pneus.5-24 ~ 5-30, 8-102
Visserie9Contrôler tous les assemblages et fixztions. 5-20
Éclairage9Contrôler si le fonctionnement est correct. 5-22, 8-104 ~ 8-106

5-17
EBU00490
Transmission oil
Make sure the transmission oil is at the specified
level. Add oil as necessary. (See pages 8-17 ~
8-23.)
cC
Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”) con-
tain anti-friction additives which will cause
clutch and/or starter clutch slippage, result-
ing in reduced component life and poor
engine performance.
Recommended oil:
SAE 10W30
Recommended oil classification:
API Service SE, SF, SG type or higher
Oil quantity:
Total amount:
1.7 L
Periodic oil change:
1.5 L

6-3
EBU00512
Starting a cold engine
w
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.
1. Set the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the engine
stop switch to “RUN”.
4. Shift the transmission into neutral.
5. Use the starter (choke) in reference to the
figure: