2001 TOYOTA SEQUOIA seat

H23984
6 seconds
Ignition Switch
SRS Warning
Light (*1)
SRS Warning
Light (*2)
*1: SRS airbag system is normal
*2: SRS airbag system has trouble ON
OFF
ON
OFF
ON
OFF
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1139
1333 Author: Date:
2005 SEQUOIA (RM1146U)
3. FUNCTION OF SRS WARNING LIGHT
(a) Primary check.
Turn the ignition switch to the LOCK position. Wait for at least 2 seconds, then turn the ignition switch
to the ON position. The SRS warning light comes on for approximately 6 seconds and the SRS airbag
system diagnosis (including the seat belt pretensioner and occupant classification system) is per-
formed.
HINT:
If trouble is detected during the primary check, the SRS warning light remains on even after the primary
check period (for approximately 6 seconds) has elapsed.
(b) Constant check.
After the primary check, the airbag sensor assembly constantly monitors the SRS airbag system for
trouble.
HINT:
If trouble is detected during the constant check, the airbag sensor assembly functions as follows:

The SRS warning light comes on.

The SRS warning light goes off, and then comes on. This blinking pattern indicates the source voltage
drop. The SRS warning light goes off 10 seconds after the source voltage returns to normal.

DI±1140
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1334 Author: Date:
2005 SEQUOIA (RM1146U)
(c) Review.
(1) When the SRS airbag system is normal:
The SRS warning light comes on only during the primary check period (for approximately 6 se-
conds after the ignition switch is turned to the ON position).
(2) When the SRS airbag system has trouble:

The SRS warning light remains on even after the primary check period has elapsed.

The SRS warning light goes off after the primary check, but comes on again during the
constant check.

The SRS warning light does not come on when turning the ignition switch from the LOCK
to ON position.
HINT:
The airbag sensor assembly keeps the SRS warning light on if the airbag has been deployed.
4. FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR
The passenger airbag ON/OFF indicator function as follows:
(1) Turn the ignition switch to the ON position.
(2) The passenger airbag ON/OFF indicator (ºONº and ºOFFº) comes on for approximately 4 se-
conds, then goes off for approximately 2 seconds.
(3) Approximately 6 seconds after the ignition switch is turned to the ON position, the passenger
airbag ON/OFF indicator will be ON/OFF depending on the conditions listed below.
HINT:
If the front passenger seat condition and the indication by the passenger airbag ON/OFF indicator differ from
those shown in the table below, and the SRS warning light is off, then the DTC is not output. If this occurs,
perform troubleshooting of ºTrouble in indication of Passenger airbag ON/OFF indicatorº (see page
DI±1485).
ConditionºONº indicatorºOFFº indicator
VacantOFFOFF
Adult is seated.ONOFF
Child is seated.OFFON
Child restraint system (CRS) is set.OFFON
Occupant classification system failureOFFON

H24029
Curtain Shield Airbag
Sensor Assembly RH
(*1)
Side Airbag Sensor
Assembly RH (*1)
Front Airbag
Sensor RH
RSCA OFF Switch
(*1)
Airbag Sensor
Assembly
Front Airbag
Sensor LH
Side Airbag Sensor
Assembly LH (*1)
Curtain Shield AIrbag
Sensor Assembly LH
(*1)Spiral CableTo
Occupant
Classification ECU
Front Seat Outer
Belt RH
(P/T Squib RH)
Side Airbag
Assembly RH
(Side Squib RH) (*1)
Front Passenger
Airbag Assembly
(P Squib)
Integration Control
and Panel
(Passenger Airbag
ON/OFF Indicator)
Combination Meter
(SRS Warning Light/
RSCA OFF Indicator
(*1))
Steering Wheel
Pad (D Squib)
Side Airbag
Assembly LH
(Side Squib LH) (*1)
Curtain Shield Airbag
Assembly LH (Curtain
Shield Airbag LH
Squib) (*1)
Front Seat Outer
Belt LH
(P/T Squib LH)
Seat Position AIrbag
Sensor Assembly/
Front Seat Inner Belt LH
(Buckle Switch LH)Curtain Shield Airbag
Assembly RH
(Curtain Shield Airbag
RH Squib) (*1)
9 13
10 14
11
1512
16 15
2 6
37
4 8
25 29
26 30
27 33
28 34
1721
1822
19 23
2024
3
4
7
89
10
13
14 11
1227
28
29
30 31
32
31
32 DI±1144
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1338 Author: Date:
2005 SEQUOIA (RM1146U)

H23825
Occupant
Classification ECUFront Seat Inner
Belt RH
(Buckle Switch RH)
Occupant
Classification
Sensor Front LH
Occupant
Classification
Sensor Front RH
Occupant
Classification
Sensor Rear LH
Occupant
Classification
Sensor Rear RH 35
36
37
3839
40
41
42
40
41
40
41
40
41 From
Airbag Sensor Assembly
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1145
1339 Author: Date:
2005 SEQUOIA (RM1146U)

DIDGP±01
DI±1152
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1346 Author: Date:
2005 SEQUOIA (RM1146U)
DATA LIST / ACTIVE TEST
HINT:
By accessing the DATA LIST displayed by the hand±held tester, you can perform such functions as reading
the values of the switches and sensors without removing any parts. Reading the DATA LIST is the first step
of troubleshooting and is one method to shorten labor time.
1. DATA LIST FOR AIRBAG SENSOR ASSEMBLY
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch to the ON position.
(c) Following the display on the tester screen, read the ºDATA LISTº.
ItemMeasurement tem/
Range (Display)Normal ConditionDiagnostic Note
D SEAT POSITION
Seat position (Driver side)/
FORWARD: Seat position
is forward
BKWARD: Seat position is
rearward
FAIL: A failure is detected
FORWARD/BKWARD±
PASSENGER CLASS
Passenger classification/
NG: Data is not deter-
mined
NONE: Vacant
CHILD: Child (less than 36
kg (79.37 lb)) is seated
SMALL: Adult (36 to 54 kg
(79.37 to 119.05 lb)) is
seated
REGULAR: Adult (more
than 54 kg (119.05 lb)) is
seated
FAIL: A failure is detected
NG/NONE/CHILD/SMALL/
REGULAR±
D BUCKLE SW
Buckle switch (Driver side)/
UNSET: The seat belt is
not fastened
SET: The seat belt is fas-
tened
NG: Data is not deter-
mined
UNSET/SET±
P BUCKLE SW
Buckle switch (Passenger
side)/
UNSET: The seat belt is
not fastened
SET: The seat belt is fas-
tened
NG: Data is not deter-
mined
UNSET/SET±
DISPLAY TYPE
Display type identification
information/
LR: The display is indi-
cated by LH/RH
DP: The display is indi-
cated by Driver/Passenger
LR/DPFor this vehicle, the display
is displayed by LH/RH.

± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1153
1347 Author: Date:
2005 SEQUOIA (RM1146U)
2. DATA LIST FOR OCCUPANT CLASSIFICATION ECU
(a) Connect the hand±held tester to the DLC3.
(b) Turn the ignition switch to the ON position.
(c) Following the display on the tester screen, read the ºDATA LISTº.
ItemMeasurement Item/
Range (Display)Normal ConditionDiagnostic Note
IG SW
Ignition switch condition/
ON: Ignition switch ON
OFF: Ignition switch OFF
ON/OFF±
P BUCKLE SW
Buckle switch (Passenger
side)/
OFF: Unfasten the pas-
senger side seat belt
ON: Fasten the passenger
side seat belt
NG: Passenger side seat
belt has a trouble
OFF/ON±
PASSENGER CLASS
Passenger classification/
AF05: Adult (36 to 54 kg
(79.37 to 119.05 lb)) is
seated
AM50: Adult (more than 54
kg (119.05 lb)) is seated
CHILD: Child (less than 36
kg (79.37 lb) is seated
CRS: Child restraint sys-
tem (less than 7 kg (15.43
lb)) and passenger side
buckle switch is ON, then
7 to 36 kg (15.43 to 79.37
lb)) is set
OFF: Vacant
AF05/AM50/CHILD/CRS/
OFF±
SENS RANGE INF
Sensor range information/
OK: The value of a sensor
is within the range
NG: The value of a sensor
is over the range
OK±
FL SENS RANGE
Front left sensor range in-
formation/
OK: Sensor range is ±17
to 27 kg (±37.48 to 59.52
lb)
Min.: Less than ±17 kg
(±37.48 lb)
Max.: More than 27 kg
(59.52 lb)
OK±
FR SENS RANGE
Front right sensor range in-
formation/
OK: Sensor range is ±17
to 27 kg (±37.48 to 59.52
lb)
Min.: Less than ±17 kg
(±37.48 lb)
Max.: More than 27 kg
(59.52 lb)
OK±

DIDGQ±01
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
DI±1155
1349 Author: Date:
2005 SEQUOIA (RM1146U)
DIAGNOSTIC TROUBLE CODE CHART
1. DTCS FOR SUPPLEMENTAL RESTRAINT SYSTEM
If a trouble code is displayed during the DTC check, check the circuit listed for the code in the table below
(Proceed to the page listed for that circuit).
HINT:

When the SRS warning light remains on and the DTC output is the normal system code, a voltage
source drop is likely to occur. This malfunction is not stored in the memory by the airbag sensor assem-
bly. If the power source voltage returns to normal, the SRS warning light will automatically go off.

When 2 or more codes are indicated, the code with the lower number appears first.

If a code is not listed on the display chart, the airbag sensor assembly may have failed.

In the case of any malfunction concerning an open circuit, short to ground, or short to B+ due to a squib,
other malfunction codes may not be detected. In this case, repair the malfunction currently indicated
and then perform malfunction diagnosis again.

Mark in the check mode column:
ºº: DTC is corresponding to the check mode.
º º: DTC is not corresponding to the check mode.

When the DTC B1650/32 is detected as a result of troubleshooting for the Supplemental Restraint Sys-
tem, perform troubleshooting for the occupant classification system as shown in the chart below.
DTC No.
(See
Page)
Detection ItemTrouble AreaCheck ModeSRS
Warning Light
B1000/31
(DI±1161)
Airbag sensor assembly malfunction
Airbag sensor assemblyON
B1610/13
(DI±1162)
Front airbag sensor RH malfunction

Front airbag sensor RH

Airbag sensor assembly

Cowl wire

Engine room main wire
ON
B1615/14
(DI±1171)
Front airbag sensor LH malfunction

Front airbag sensor LH

Airbag sensor assembly

Cowl wire

Engine room main wire
ON
B1620/21
(*1)
(DI±1180)

Side airbag sensor assembly RH malfunction

Side airbag sensor assembly RH

Airbag sensor assembly

Floor wire
ON
B1625/22
(*1)
(DI±1186)

Side airbag sensor assembly LH malfunction

Side airbag sensor assembly LH

Airbag sensor assembly

Floor wire No. 2
ON
B1630/23
(*1)
(DI±1192)

Curtain shield airbag sensor RH malfunction

Curtain shield airbag sensor assembly RH

Airbag sensor assembly

Floor wire
ON
B1635/24
(*1)
(DI±1198)

Curtain shield airbag sensor LH malfunction

Curtain shield airbag sensor assembly LH

Airbag sensor assembly

Floor wire No. 2
ON
B1650/32
(DI±1204)
Occupant classification system malfunction

Occupant classification system

Airbag sensor assembly

Floor wire

Seat wire No. 1
ON
B1653/35
(DI±1213)
Seat position sensor assembly malfunction

Seat position airbag sensor assembly

Airbag sensor assembly

Floor wire No. 2
ON

DI±1156
± DIAGNOSTICSSUPPLEMENTAL RESTRAINT SYSTEM
1350 Author: Date:
2005 SEQUOIA (RM1146U)B1656/38
(DI±1220)

Seat belt buckle switch LH malfunction

Front seat inner belt LH

Airbag sensor assembly

Floor wire No. 2
ON
B1660/43
(DI±1227)
Passenger airbag ON/OFF indicator malfunction

Integration control and panel (Passenger
airbag ON/OFF indicator)

Airbag sensor assembly

Cowl wire
ON
B1661/44
(*1)
(DI±1238)

Roll over cut off indicator malfunction

Combination meter (RSCA OFF indicator)

Airbag sensor assembly

Cowl wire
ON
B1662/45
(DI±1247)
SRS warning light circuit malfunction

Combination meter (SRS warning light)

Airbag sensor assembly

Cowl wire
ON
B1800/51
(DI±1352)
Short in D squib circuit

Steering wheel pad (D squib)

Spiral cable

Airbag sensor assembly

Cowl wire
ON
B1801/51
(DI±1352)
Open in D squib circuit

Steering wheel pad (D squib)

Spiral cable

Airbag sensor assembly

Cowl wire
ON
B1802/51
(DI±1352)
Short in D squib circuit (to ground)

Steering wheel pad (D squib)

Spiral cable

Airbag sensor assembly

Cowl wire
ON
B1803/51
(DI±1352)
Short in D squib circuit (to B+)

Steering wheel pad (D squib)

Spiral cable

Airbag sensor assembly

Cowl wire
ON
B1805/52
(DI±1374)
Short in P squib circuit

Front passenger airbag assembly (P squib)

Airbag sensor assembly

Cowl wire
ON
B1806/52
(DI±1374)
Open in P squib circuit

Front passenger airbag assembly (P squib)

Airbag sensor assembly

Cowl wire
ON
B1807/52
(DI±1374)
Short in P squib circuit (to ground)

Front passenger airbag assembly (P squib)

Airbag sensor assembly

Cowl wire
ON
B1808/52
(DI±1374)
Short in P squib circuit (to B+)

Front passenger airbag assembly (P squib)

Airbag sensor assembly

Cowl wire
ON
B1810/53
(DI±1384)
Short in D squib (Dual stage ± 2nd step) circuit

Steering wheel pad (D squib, Dual stage ±
2nd step)

Spiral cable

Airbag sensor assembly

Cowl wire
ON
B1811/53
(DI±1384)
Open in D squib (Dual stage ± 2nd step) circuit

Steering wheel pad (D squib, Dual stage ±
2nd step)

Spiral cable

Airbag sensor assembly

Cowl wire
ON