2001 SUBARU OUTBACK turn signal

Maintenance and service11-55
–
CONTINUED –

Rear combination lights Sedan
HBB034BCHBF014DA
HBB035BB
1. Op en the trunk lid .
2. Op en the rear c omb ination lig ht c over. For covers on the trunk lid:
Unlatc h the c over b y p ushing the knob and op en the c over.
For covers on the trunk wall:
Unlatc h the c over b y moving the knob up ward and op e n the c over.
3. Remove the b ulb soc ket from the lig ht assemb ly b y turning it c oun-
terc loc kwise.
4. Remove the b ulb from the soc ket.Rear turn signal light: Remove the b ulb from the soc ket b y p ushing
it and turning it c ounterc loc kwise.Others: Pull the b ulb out of the soc ket.

11-565. Install a new b ulb in the soc ket.
6. Set the b ulb soc ket into the rear c omb ination lig
ht assemb ly and
turn it c loc kwise until it loc ks.
7. Close the c over and latc h the c loc k. Station wagon
n Brake/tail and rear turn signal light bulbs
It may b e d iffic ult to rep lac e the b ulb s. It is rec ommend ed that you
have the b ulb s rep lac ed b y your SUBARU d ealer.
HBB022BB
HBB021BB
1. Remove the lig ht b ulb rep lac ement servic e hole c overs at two
p lac es b y p rying the ed g e of the c over with a reg ul ar sc rewd river.
2. Remove the up p er and lower nuts. Then, slid e the rear c omb ina-
tion lamp assemb ly to the rear and remove it from t he vehic le.
HBB047BBHBB024BB
Brake/tail light bulbRear turn signal light bulb

Maintenance and service11-57
–
CONTINUED –
3. Using a Phillip s sc rewd river, remove the up p er an
d lower sc rews
that sec ure the sid e c over of the rear c omb ination lig ht assemb ly.
4. Remove the b ulb soc ket from the rear c omb ination lig ht assemb ly
b y turning it c ounterc loc kwise.
HBB048BA
HBB025BA
5. Remove the b ulb from the soc ket.
Turn signal light: Pull the b ulb out of the soc ket.
Brake/tail light: Remove the b ulb from the soc ket b y p ushing it and
turning it c ounterc loc kwise.
6. Install a new b ulb in the soc ket.
7. Set the b ulb hold er into the rear c omb ination lig ht assemb ly and
turn it c loc kwise until it loc ks.
8. Fit the rear c omb ination lig ht assemb ly into the vehic le b od y and
tig hten the nuts from the interior of the vehic le.
9. Reinstall the lig ht b ulb rep lac ement servic e hole c overs.