2001 SUBARU OUTBACK manual transmission

7-32
HB4001BA
To release the p arking b rake, p ull the lever up slig htly, p ress the release
b utton, then lower the lever while keep ing the b utt on p ressed .
When the p arking b rake is set while the eng ine is r unning , the p arking
b rake warning lig ht c omes on. After starting the ve hic le, b e sure that the
warning lig ht has g one out b efore the vehic le is d r iven. Refer to the
“ Warning and ind ic ator lig hts ” sec tion (c hap ter 3).
When p arking your vehic le, always set the p arking b rake firmly and p ut
the shift lever in the “1 ” (1st) for an up g rad e or “R ” (Reverse) for a d own-
g rad e for manual transmission vehic les, or in the “P ” (Park) p osition for
automatic transmission vehic les. Always set the p ar king b rake firmly
when p arking your vehic le. Never rely on the transm ission alone to hold
the vehic le.
HB4015AA
HB4014AA

7-343. Push the c ontrol lever d ownward in the
“SET, COAST ” d irec tion
and release it. Then release the ac c elerator p ed al.
The vehic le will maintain the d esired sp eed .
Vehic le sp eed c an b e temp orarily inc reased while d r iving with the
c ruise c ontrol ac tivated . Simp ly d ep ress the ac c ele rator p ed al to ac -
c elerate the vehic le. When the ac c elerator p ed al is released , the ve-
hic le will return to and maintain the p revious c rui sing sp eed .
To temporarily cancel the cruise control
There are four ways to c anc el the c ruise c ontrol te mp orarily:
Dep ress the b rake p ed al.
Pull the c ontrol lever in the “CANCEL ” d irec tion. (if so eq uip p ed )
Dep ress the c lutc h p ed al (manual transmission vehic les only).
Shift the selec tor lever into the “N ” p osition (automatic transmis-
sion vehic les only).
To resume the c ruise c ontrol after it has b een temp orarily c anc eled
and with vehic le sp eed of ab out 20 mp h (32 km/h) or more, p ush the
c ontrol lever up ward in the “ACCEL, RESUME ” d irec tion to return to
the orig inal c ruising sp eed automatic ally. To turn off the cruise control
There are two ways to turn off the c ruise c ontrol:
Push the main switc h ag ain.
Turn the ig nition switc h to the “ACC ” p osition (b ut only when the
vehic le is c omp letely stop p ed ).
To change the cruising speed
n To increase the speed
1. Push the c ontrol lever up ward in the “ACCEL, RESUME ” d irec tion
and hold it until the vehic le reac hes the d esired s p eed .
When the d ifferenc e b etween the ac tual vehic le sp ee d and the set
sp eed is less than 4 mp h (6.8 km/h), the set sp eed c an b e inc reased
1 mp h (1.6 km/h) eac h time b y p ressing the c ontrol lever up ward in
the “ACCEL, RESUME ” d irec tion q uic kly within a half sec ond .
2. Push the c ontrol lever d ownward in the “SET, COAST ” d irec tion

8-2
New vehicle break-in driving
–
the first 1,000 miles (1,600 km)
The p erformanc e and long life of your vehic le are d ep end ent on how you
hand le and c are for your vehic le while it is new. F ollow these instruc tions
d uring the first 1,000 miles (1,600 km): Do not rac e the eng ine. Break-in engine speed limit
Vehic le with tac hometer
Never exc eed 4,000 rp m eng ine sp eed exc ep t for b rie f ac c eleration
in an emerg enc y. Vehic le without tac hometer (for manual transmission )
Do not exc eed the sp eed limits b elow for eac h g ear p osition exc ep t
for b rief ac c eleration in an emerg enc y.
mph (km/h)
1st
2nd3rd4th
22 (35)37 (60)50 (80)65 (105)
Vehic les without tac hometer (for automatic transmis sion)
Try to d rive at mod erate sp eed s while ac c elerating and b raking
smoothly. Prop er g ears are selec ted automatic ally a c c ord ing to the
d riving c ond itions.
Do not d rive at one c onstant eng ine or vehic le sp ee d for a long time,
either fast or slow. Avoid starting sud d enly and rap id ac c eleration, exc ep t in an emer-
g enc y. Avoid hard b raking , exc ep t in an emerg enc y.
The same b reak-in p roc ed ures should b e ap p lied to a newly installed or
overhauled eng ine or when b rake p ad s or b rake linin g s are rep lac ed
with new ones.

Driving tips8-11
–
CONTINUED –
Keep the d oor loc ks from freezing b y sq uirting them
with d eic er or
g lyc erin.
Forc ing a frozen d oor op en may d amag e or sep arate t he rub b er
weather strip s around the d oor. If the d oor is froz en, use hot water to
melt the ic e, and afterward s thoroug hly wip e the wa ter away.
Use a wind shield washer fluid that c ontains an anti freeze solution. Do
not use eng ine antifreeze or other sub stitutes b ec a use they may d am-
ag e the p aint of the vehic le.n Before driving your vehicle
Before entering the vehic le, remove any snow or ic e from your shoes
b ec ause that c ould make the p ed als slip p ery and d an g erous.
While warming up the vehic le b efore d riving , c hec k that the ac c elera-
tor p ed al, b rake p ed al, and all other c ontrols op er ate smoothly.
Clear away ic e and snow that has ac c umulated und er the fend ers to
avoid making steering d iffic ult. During severe wint er d riving , stop
when and where it is safe to d o so and c hec k und er the fend ers p eri-
od ic ally. n Parking in cold weather
WARNING
Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your
vehicle if you park the vehicle in snow with the engine running.
Do not use the p arking b rake when p arking for long p eriod s in c old
weather sinc e it c ould freeze in that p osition. Ins tead , ob serve the fol-
lowing :
1. Plac e the shift lever in “1 ” or “R ” for manual transmission vehic les,
and in “P ” for automatic transmission vehic les.
2. Use tire stop s und er the tires to p revent the veh ic le from moving .
When the vehic le is p arked in snow or when it snows , raise the wip er
b lad es off the g lass to p revent d amag e to them.

8-38n
Driving with a trailer
You should allow for c onsid erab ly more stop p ing d is tanc e when
towing a trailer. Avoid sud d en b raking b ec ause it m ay result in skid -
d ing or jac kknifing and loss of c ontrol. Avoid ab rup t starts and sud d en ac c elerations. If yo ur vehic le has a
manual transmission, always start out in first g ear and release the
c lutc h at mod erate eng ine revolution. Avoid uneven steering , sharp turns and rap id lane c hang es.
Slow d own b efore turning . Make a long er than normal turning
rad ius b ec ause the trailer wheels will b e c loser th an the vehic le
wheels to the insid e of the turn. In a tig ht turn, the trailer c ould hit your
vehic le. Crosswind s will ad versely affec t the hand ling of yo ur vehic le and
trailer, c ausing sway. Crosswind s c an b e d ue to wea ther c ond itions or
the p assing of larg e truc ks or b uses. If swaying oc c urs, firmly g rip the
steering wheel and slow d own immed iately b ut g rad ua lly.
When p assing other vehic les, c onsid erab le d istanc e is req uired
b ec ause of the ad d ed weig ht and leng th c aused b y at tac hing the
trailer to your vehic le. Bac king up with a trailer is d iffic ult and takes p r ac tic e. When b ac k-
ing up with a trailer, never ac c elerate or steer ra p id ly. When turning
b ac k, g rip the b ottom of the steering wheel with on e hand and turn it
to the left for a left turn, and turn it to the rig ht for a rig ht turn.
Left turnRight turn
OM-H2791
If the ABS warning lig ht illuminates while the vehi c le is in motion,
stop towing the trailer and have rep airs p erformed immed iately b y the

8-405. Shift into 1st or reverse g ear (manual transmissi
on) or “P ” (auto-
matic transmission) and shut off the eng ine.

In case of emergency9-5
–
CONTINUED –

Do not use oil or grease on the wheel studs or nuts when the
spare tire is installed. This could cause the nuts to become loose and lead to an accident. Never place a tire or tire changing tools in the passenger
compartment after changing wheels. In a sudden stop or colli-
sions, loose equipment could strike occupants and cause injury.Store the tire and all tools in the proper place.
If you have a flat tire while d riving , never b rake sud d enly; keep d riving
straig ht ahead while g rad ually red uc ing sp eed . Then slowly p ull off the
road to a safe p lac e.
1. Park on a hard , level surfac e, whenever p ossib le, then stop the en-
g ine.
2. Set the p arking b rake sec urely and shift a manual transmission ve-
hic le in reverse or an automatic transmission vehic le in the “P ” (Park)
p osition.
3. Turn on the hazard warning flasher and have every one g et out of the
vehic le.
4. Put wheel b loc ks at the front and rear of the tir e d iag onally op p osite
the flat tire.
OM-H2259
Jacking position
Wheel blocks

In case of emergency9-23
–
CONTINUED –

Using a flat-bed truck
HB8008AA
This is the b est way to transp ort your vehic le. Use the following p roc e-
d ures to ensure safe transp ortation.
1. Shift the selec tor lever into the “P ” p osition for automatic transmis-
sion vehic les or “1st ” for manual transmission vehic les.
2. Pull up the p arking b rake lever firmly.
3. Sec ure the vehic le onto the c arrier p rop erly with safety c hains.
Eac h safety c hain should b e eq ually tig htened and c are must b e tak-
en not to p ull the c hains so tig htly that the susp e nsion b ottoms out.
Towing with all wheels on the ground
WARNING
Never turn the ignition switch to the “LOCK” position while the
vehicle is being towed because the steering wheel and the direc- tion of the wheels will be locked. Remember that the brake booster and power steering do not
function when the engine is not running. Because the engine isturned off, it will take greater effort to operate the brake pedal andsteering wheel.