2001 SUBARU LEGACY oil change

1-28
Seatbelt maintenance
CAUTION
Keep the belts free of polishes, oils, chemicals and particularly
battery acid. Never attempt to make modifications or changes that will pre-
vent the seatbelt from operating properly.
To c lean the seatb elts, use a mild soap and lukewar m water. Never
b leac h or d ye the b elts b ec ause this c ould seriousl y affec t their streng th.
Insp ec t the seatb elts and attac hments inc lud ing the web b ing and all
hard ware p eriod ic ally for c rac ks, c uts, g ashes, tea rs, d amag e, loose
b olts or worn areas. Rep lac e the seatb elts even if only minor d amag e is
found .
Front seatbelt pretensioners
WARNING
To obtain maximum protection, occupants should sit in an up-
right position with their seatbelts properly fastened. Refer to
“Seatbelts” section in this chapter.
Do not modify, remove or strike the front seatbelt retractor as-
semblies or surrounding area. This could result in accidental ac-tivation of the seatbelt pretensioners or could make the system
inoperative, possibly resulting in serious injury. Seatbelt preten-sioners have no user-serviceable parts. For required servicing of
front seatbelt retractors equipped with seatbelt pretensioners,
see your nearest SUBARU dealer. When discarding front seatbelt retractor assemblies or scrap-
ping the entire car due to collision damage or for other reasons,
consult your SUBARU dealer.

Seat, seatbelt and SRS airbags1-53
–
CONTINUED –

Maintenance CAUTION
Keep the belts free of polishes, oils, chemicals and particularly
battery acid as they may weaken the belts. Never attempt to make modifications or changes that will pre-
vent the built-in child restraint from operating properly.
The b uilt-in c hild restraint may b e c leaned with mi ld soap and luke-
warm water. Do not use household c leaners. They may weaken the
b elts or d amag e p lastic p arts.
Keep the b uilt-in c hild restraint b elts c lean and d ry. Clean the b elts
with only a mild soap and lukewarm water. Never b le ac h or d ye the
b elts b ec ause this c ould seriously affec t their str eng th.
The removab le p ad is attac hed to the c hild restrain t c ushion and seat-
b ac k with hook and loop fasteners (Velc ro ). It is p ossib le to remove
the p ad , hand wash it in c old water and d ry it in t he shad e. Never
b leac h or iron the p ad .
Period ic ally insp ec t the b elts, tong ue p lates, b uc k le, c lip , retrac tor
and anc horag es of the b uilt-in c hild restraint. If these p arts are d am-
ag ed and /or d o not func tion p rop erly, c ontac t your authorized
SUBARU d ealer for rep lac ement p arts.

Maintenance and service11-41
–
CONTINUED –

Installing the wheel cover
HGA013BA
Alig n the valve with the valve hole in the c over, t hen fit the c over on
the wheel b y tap p ing your hand evenly around the c i rc umferenc e of
the c over.
NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheel nutsafter driving approximately 600 miles (1,000 km). If any nut is loose,tighten it to the specified torque.
Aluminum wheels (If equipped)
Aluminum wheels c an b e sc ratc hed and d amag ed easily . Hand le them
c arefully to maintain their ap p earanc e, p erformanc e , and safety.
When any of the wheels is removed and rep lac ed for tire rotation or to
c hang e a flat, always c hec k the tig htness of the wh eel nuts after d riving
ap p roximatly 600 miles (1,000 km). If any nut is lo ose, tig hten it to the
sp ec ified torq ue. Never ap p ly oil to the thread ed p arts, wheel nuts, or tap ered surfac e
of the wheel. Never let the wheel rub ag ainst sharp p rotrusions o r c urb s.
Be sure to fit tire c hains on uniformly and c omp let ely around the tire,
otherwise the c hains may sc ratc h the wheel.