Instruments and controls3-31
–
CONTINUED –
n
Compass zone adjustment
HB6021AB
1. The zone setting is factory preset to Zone 8. Refer to the “Com-
pass calibration zone ” map shown above or one attached to the end
of this manual to verify that the compass zone setting is correct for your geographical location.
2. Press and hold the right button for 3 seconds then release, and the
word “ZONE” will briefly appear and then the zone number will be dis-
played.
3. Press the right hand button repeatedly to cycle the display through
all possible zone settings. Stop cycling when the correct zone settingfor your location is displayed.
4. Releasing the button for 3 seconds will exit the zone setting mode.
Outside mirrors
WARNING
Objects look smaller in a convex mirror (passenger side) and far-
ther away than when viewed in a flat mirror. Do not use the con-vex mirror to judge the distances of vehicles behind you whenchanging lanes. Use the inside mirror (or glance backwards) todetermine the actual size and distance of objects that you view in
the convex mirror.
Climate control4-5
–
CONTINUED –
: Air flows throug h the wind shield d efroster outlets
and foot
outlets.
: Air flows throug h the wind shield d efroster outlets .
n Air conditioner button (if equipped)
HS4003BB
The air c ond itioner op erates only when the eng ine i s running .
Push the air c ond itioner b utton while the fan is in op eration to turn on
the air c ond itioner. The ind ic ator lig ht will c ome on.
Push it ag ain to turn off the air c ond itioner. n Air inlet selection lever
WARNING
Continued operaton in the “
” position may fog up the win-
dows. Switch to the “
” position as soon as the outside
dusty condition clears.
: Interior air is rec irc ulated insid e the p asseng er c omp artment.
: Outsid e air is d rawn into the p asseng er c omp artme nt.