YOUR 106 IN DETAIL42
Traffic information programme
Press the “TA”button to switch the function on or off.
Any traffic information flash will be given priority, whatever source you are listening to (radio, CD or CD changer). Note: the volume of the traffic information announcements is independent of the volume of normal radio
listening. You can adjust it using the volume button. The setting will be stored and will be used when thenext messages are broadcast.
While traffic information is being broadcast, the display will alternately show “TRAFFIC” and the name of the station.
When the station selected cannot broadcast traffic information, the display shows “NO TA”.
Regional following mode (REG) When they are part of a network, certain stations broadcast regional programmes in the various areas they serve. With regional following mode you can keep listening to the same programme.To do this press the “RDS”button for more than two seconds to switch this function on or off.
PTY function This allows you to listen to stations broadcasting a specific type of programme (news, culture, sport, rock etc.). With FM selected, press the “TA”button for two seconds to switch this function on or off.
To find a PTY programme:
Ð switch on the PTYfunction,
Ð briefly press button “G”or “H” to scroll down the list of the various types of programmes offered,
Ð when the programme of your choice is displayed, keep button “G”or “H” pressed for more than two seconds
to carry out an automatic search (after an automatic search the PTY function is switched off).
In PTY mode the different types of programmes can be stored in memory. To do this, press down the preselec-
tion buttons “1”to “6” for more than two seconds. Recalling the type of programme stored in the memory is by
a brief press on the corresponding button.
06-05-2002
Special procedure for Sport model Positioning the jack ÐClose the jack completely.
Ð Position the jack under the vehicle at the jacking points tilting it by 90¡, so that the jack handle hinge is at the same height as the sill trim, then straighten it.
Ð Check that the jack is in correct contact with the sill.
Replacing the wheel in the carrier Ð Position the jack storage box with the arrow pointing forwards.
PRACTICAL INFORMATION8181
For your safety, always change a wheel:
Ð on level, solid, non-slipperyground,
Ð with the handbrake applied,
Ð
with Þrst or reverse gear engaged,
Ð Chock the vehicle.
Ð Never position yourself undera vehicle which is supportedonly by a jack. Use a ramp.
After changing the wheel Ð Have the wheel bolts and the tyre pressure checked assoon as possible.
Ð Have the damaged tyrerepaired so that it can bereturned to the vehicle assoon as possible.
Ð The Òspace-savingÓ* type ofspare wheel is Þtted with a115/70R 15 tyre and is for
temporary use only. - Pressure: 61 lbf. in 2
(4.2 bars).
- Maximum speed: 50 m.p.h. (80 km/h).
* According to speciÞcation
3
Never place the jack in contact with the sill trim.
06-05-2002
