driving, engine RPM, transmission range, trip distance and the total
distance your vehicle has been driven.
Refer to your ªOwner Guideº for more information regarding the warning
lights and gauges for your FFV.
FLEX FUEL (FF) COMPONENT IDENTIFICATION
The accompanying illustration shows all of the unique 3.0L Sable FF
components at a glance. All of these unique materials and alloys
have ªethanol fuel compatibilityº. NEVER replace a unique FF
component with a standard vehicle component. Ford Motor Company
has designed the materials, components and system configurations
specifically for the 3.0L Sable FF vehicle and is monitoring the
service history of these vehicles.
1.Spark plugÐ Has a colder heat range.
2.EngineÐ Able to use fuel ethanol, unleaded gasoline, or a
combination of both fuels up to 85% alcohol.
3.Fuel injectorsÐ Higher fuel flow capacity, modified spray nozzle
design and material changes for ªalcohol fuel compatibility.º
13
12
3
4
5
8
9
10
1112
151614
6
7
Instrument panel controls
8
4.Fuel railÐ Material changes are made for ªalcohol fuel compatibility.º
5.Engine block heaterÐ If equipped, is used to assist in cold start
below ±23ÉC (±10ÉF).
6.PCM processorÐ Calibration is utilized to optimize engine function
for alcohol fuel operation.
7.Wiring harnessÐ Wiring changes have been made to connect with
the fuel sensor.
8.Fuel sensorÐ Determines the percentage of ethanol in the fuel.
9.Fuel supply lineÐ Material changes are made for ªalcohol fuel
compatibility.º
10.Fuel pump assembly/fuel sending unitÐ Fuel pump specifically
designed for alcohol fuels. Stainless steel parts are used.
11.Vapor control valveÐ Controls vapor flow to charcoal canister.
12.Filler tubeÐ Improved coating is applied and anti-siphon screens
installed.
13.Charcoal canister trayÐ Protective enclosure.
14.Evaporative emission systemÐ Charcoal canister system enlarged
and modified for additional alcohol fuel vapor capacity and higher vapor
flow.
15.Vapor (roll over) valvesÐ Helps to increase fuel capacity and
vapor flow. Material changes are made for ªalcohol fuel compatibility.º
16.Fuel tankÐ A 68.2 liter (18 gallon) specially coated steel fuel tank
is used for ªalcohol fuel compatibility.º
ªAlcohol fuel compatibilityº means that the component performs
satisfactorily, is durable and does not contaminate the fuel when tested
in worst-case ethanol-gasoline blends up to 85% alcohol.
Instrument panel controls
9
