2001 MERCEDES-BENZ M-Class key

38
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Skip blanks
If the tape deck does not detect a sound signal for longer
than 15 seconds, it will fast forward to the next track.
This function will continue after the tape has reached
the end and switched to the opposite track.To start the function:
Press the softkey “SKIP”. The activated skip
blanks function is shown by a negative SKIP on the dis-
play.
If the tape deck activates fast forwards on the display
“SKIPPING BLANK SECTION” will appears.
To stop the function:
Press the highlighted softkey “SKIP”.
P68.20-2110-27
Tape operation

39
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Dolby B (noise reduction)
This function provides the optimum playback of tapes
recorded with Dolby B.
The Dolby noise reduction system is manufactured
under licence by Dolby Laboratories Licensing Corpora-
tion. The word Dolby and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corpora-
tion.To start the function:
Press the softkey “ ”. The activated Dolby B
function is shown by a negative on the display.
To stop the function:
Press the highlighted softkey “ ”.
P82.85-5000-26
Tape operation

40
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
PausePress the softkey “II”. The tape will stop playing.
On the display will appear “PAUSE”. The tape will also
stop if you send or receive a phone call.
To c a n c e l PAU S E :
Press the softkey “PLAY”.
P85.25-5001-26
Tape operation

41
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Operating and display elements -
Single CD player (optional) and CD changer (optional)1Switching CD operation on, page 50
2Color display with main menu
3Lower the front of the control panel, behind the
front panel is the single CD slot with the but-
ton, page 42
4Raising or lowering the volume, page 11
5Selecting a CD (MCS with CD changer), page 53
Selecting a track, page 54
6Push joystick to : Track select, the next track
starts, page 54
Push joystick to : Track select, the previous
track starts, page 54
Push joystick to : Music seek forward, page 55
Push joystick to : Music seek reverse, page 55
7Softkeys for:
“II”: Pause function, page 58
“RDM”: Random play function, page 57
“RPT”: Repeat function, page 56
“TIME”: Select time display, page 59
“ADJ”: Sound adjustment, page 153
“SCAN”: Scan function, Page 56
Tape operation

43
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Inserting or ejecting a CD (Single CD player)
Inserting:
Press to lower the front of the control panel.
The CD should be inserted with the label side up into
the CD slot. After 2 seconds the control panel will close
automatically.
Note:
In the radio and tape mode there will be an audio CD
symbol on the display if an audio CD is inserted.Ejecting:
Press to lower the front of the control panel.
Press to eject the CD.
Press to raise the front of the control panel.
If the display is in the down position for more than 20
seconds , 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position. Press the key to
return the control panel to its closed position.
CD operation

53
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Selecting CDs
(MCS with CD changer)
Selecting a CD with the number keypad:
Press a number key, e.g. , to select the correspond-
ing CD.
Note:
You can only select CD’s by pressing a number key from
to .The screen as shown above will appear for 4 seconds on
the display. The selected CD will be highlighted. If the
selected magazine slot is empty, the message “NO CD”
and the number of the selected slot will appear on the
screen. Then the next CD inserted will be selected.
The playback will begin with track 1 of the selected CD.
Note:
After the last track of the current CD has been played,
the next CD inserted in the magazine is selected and the
playback will continue with track 1.
P68.20-2110-27
P86-0081-B13 (2-fbg)
CD operation

54
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Track select
Select a track with the joystick:
Push joystick to :
The next track starts to play back.
Push joystick to :
Play back the previous track. If more than 10 seconds of
playing time have elapsed, the current track is started
over.
Push the joystick as often as necessary to select the
desired track.Selecting a track with the number keypad:
Press and enter the number of the track you wish
to select , e.g. and . Track 2 is played.
P68.20-2110-27
P86-0081-B13 (2-fbg)
CD operation

56
IntroductionAudioTelephone Navigation Index
S y s te m s e ttin g s
Scanning
The tracks on a CD can be scanned one after the other
for 8 seconds each.
To start the function:
Press the softkey “SCAN”. The activated scan
function is shown by a highlighted “SCAN” on the dis-
play.
To stop the function:
Press the highlighted softkey “SCAN” or the joy-
stick in any direction.CD track repeat
Select the repeat function to repeat the current track.
The repeat function will continue until you switch the
function off.
P68.20-2110-27
P82.85-5007-26
CD operation