2001 MAZDA MODEL 626 service

Form No. 8P95-EA-00G
Maintenance8-2
081-1A1E
IntroductionBe extremely careful to prevent injury
to yourself and others and damage to
your vehicle when using this manual
for inspection and maintenance.
If you’re unsure about any procedure
it describes, we strongly urge you to
have a reliable and qualified service
shop perform the work, preferably an
Authorized Mazda Dealer.
Factory-trained Mazda technicians and
genuine Mazda parts are best for your
vehicle. Without this expertise and the
parts that have been designed and
made especially for your Mazda,
inadequate, incomplete, and
insufficient servicing may result in
problems. This could lead to vehicledamage or an accident and injuries.
For expert advice and quality service,
consult an Authorized Mazda Dealer.
The owner should retain evidence that
proper maintenance has been
performed as prescribed.
A claim against a warranty will not
qualify if it results from lack of
maintenance and not from defective
material or authorized Mazda
workmanship.
Any auto repair shop using parts
equivalent to your Mazda’s original
equipment may perform maintenance.
But we recommend that it always be
done by an Authorized Mazda
Dealer using genuine Mazda parts.

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
(Oil-permeated air filter cannot be cleaned using the air-blow method.)
R : Replace
Maintenance
8-5
Schedule 1 (Cont’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
6
12
18
24
30
36
42
48
MAINTENANCE

1000 km
12
24
36
48
60
72
84
96
MAINTENANCE

ITEM
(
1000 miles)
(7.5)
(15)
(22.5)
(30)
(37.5)
(45)
(52.5)
(60)
Hoses and tubes for emission
I*
1
Air filter
R
R
Spark plugs
2.0-liter engine
R
R
Spark plugs
2.5-liter engine
Replace every 96,000 km (60,000 miles)
Idle speed
I
I
Fuel lines and hoses
I*1
I*1
Cooling system
I
I
Engine coolant
Replace at first 168,000 km (105,000 miles) or 60 months;
after that, every 48,000 km (30,000 miles) or 24 months
Brake lines, hoses and connections
I
I
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
R : Replace
Maintenance
8-7
Schedule 2
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Engine valve clearance
I
Engine oil
Except Puerto Rico
R
R
R
R
R
R
R
R
R
R
R
R
Engine o
il
Puerto Rico
Replace every 5,000 km (3,000 miles) or 3 months
Engine oil filter
R
R
R
R
R
R
R
R
R
R
R
R
Drive belts (tension)
I
I
Engine timing belt
*2Inspect for 96,000 km (60,000 miles)
Replace every 168,000 km (105,000 miles)
Hoses and tubes for emission
I* 1
Air filter
I*1
R
I*1
R
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.
*2 If the vehicle is operated in cold districts {below –18° C (0°F)}, replace the timing belt at 96,000 km (60,000 miles).

Form No. 8P95-EA-00G
I: Inspect and repair, clean, adjust, or replace if necessary
(Oil-permeated air filter cannot be cleaned using the air-blow method.)
R : Replace
Maintenance8-8Schedule 2 (Cont ’d)
MAINTENANCE
INTERVALS
Number of months or miles (kilometers), whichever comes first
INTERVALS
Months
4
8
12
16
20
24
28
32
36
40
44
48
MAINTENANCE

1000 km
8
16
24
32
40
48
56
64
72
80
88
96
MAINTENANCE

ITEM
(
1000 miles)
(5)
(10)
(15)
(20)
(25)
(30)
(35)
(40)
(45)
(50)
(55)
(60)
Spark plugs
2.0-liter engine
R
R
Spark plugs
2.5-liter engine
Replace every 96,000 km (60,000 miles)
Idle speed
I
I
Fuel lines and hoses
I*1
I*
1
Cooling system
I
I
Engine coolant
Replace at first 168,000 km (105,000 miles) or 60 months;
after that, every 48,000 km (30,000 miles) or 24 months
Engine coolant level
I
I
I
I
I
I
I
I
I
I
I
I
Function of all lights
I
I
I
I
I
I
I
I
I
I
I
I
Brake lines, hoses and connections
I
I
*1 According to state and federal regulations, failure to perform maintenan\
ce on these items will not void your emissions warranties. However, Mazda
recommends that all maintenance services be performed at the recommended\
time or kilometrage (mileage) period to ensure long-term reliability.

Form No. 8P95-EA-00G
Maintenance
8-11
083-1AE
Owner MaintenanceOwner Maintenance Schedule
The owner or a qualified service
technician should make these vehicle
inspections at the indicated intervals to
ensure safe and dependable operation.
Bring any problem to the attention of
an Authorized Mazda Dealer or
qualified service technician as soon as
possible.
 When refueling
• Brake and clutch fluid level
(page 8-25) •
Engine coolant level
(page 8-21)
• Engine oil level
(page 8-17)
• Washer fluid level
(page 8-33)
 At least monthly
• Tire inflation pressures
(page 8-41)
083-46A1E
At least twice a year
(for example, every spring and
fall)
• Automatic transaxle fluid level
(page 8-29)
• Power steering fluid level
(page 8-27)
You can do the following scheduled
maintenance items if you have some
mechanical ability and a few basic
tools and if you closely follow the
directions in this manual.
• Air filter
(page 8-34)

Form No. 8P95-EA-00G
Maintenance8-12•Engine coolant
(page 8-22)
• Engine oil and oil filter
(page 8-18)

083-2A2E
 Owner Maintenance Precautions
Improper or incomplete service may
result in problems. This section gives
instructions only for items easy to
perform.
WARNING
!
Maintenance Procedures:Performing maintenance work on
a vehicle can be dangerous. You
can be seriously injured while
performing some maintenance
procedure. If you lack sufficient
knowledge and experience or the
proper tools and equipment to do
the work, have it done by a
qualified technician.As explained in the Introduction (page
8-2), several procedure can be done
only by a qualified service technician
with special tools.

Form No. 8P95-EA-00G
Maintenance8-185. Pull it out again and examine thelevel. It’ s OK between L and F.
But if it’ s near at or below L, add
enough oil to bring the level to F.
CAUTION
!
Don’ t add engine oil over F.
This may cause engine damage.NOTEThe distance between L and F on
the dipstick represents 1.0 L (1.06
US qt, 0.88 Imp qt).

083-7CE
Changing engine oil and filter
Change engine oil and filter according
to Scheduled Maintenance (page
8-3).
Please act responsibly—protect the
environment and take used oil to a
recycling facility. Ask your dealer or a
service station for information.
WARNING
!
Handling Used Engine Oil:Continuous contact with used
engine oil could be dangerous. It
could cause skin cancer. Always
wash with soap and water
immediately after changing oil
and filter.

Form No. 8P95-EA-00G
Maintenance8-22

083-10AE
Do not overfill.
If new coolant is required frequently,
consult an Authorized Mazda Dealer.
CAUTION
!
Radiator coolant will damage
paint. Rinse it off quickly.NOTEMixing green coolant with orange
coolant could decrease the service
life expentancy of the coolant. Use
only genuine Mazda orange
colored or equivalent coolant.


083-11DE
Changing coolant
Change coolant according to
Scheduled Maintenance (page 8-3).
CAUTION
!
• Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals
will cut down on the coolant’ s
effectiveness.
• Don’ t add only water. Always
add a proper coolant mixture.
CAUTION
!
• The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant
to prevent corrosion and
freezing.
• DO NOT USE alcohol or
methanol antifreeze. DO NOT
MIX alcohol or methanol with
the coolant. This could damage
the cooling system.
• Don’ t use a solution that
contains more than 60 percent
antifreeze.
This would reduce
effectiveness.