2001 MAZDA MODEL 626 ECO mode

Form No. 8P95-EA-00G
*Some models.Driving Your Mazda
5-41

053-16RE
 Supplemental Restraint
System Warning Light
If the supplemental restraint system is
OK, the warning light comes on when
the ignition switch is turned to the ON
position or after the engine is cranked.
After about 6 seconds it goes out.
A system malfunction is indicated
when this light constantly flashes,
stays on or doesn’ t come on at all. If
one of these occur, consult an
Authorized Mazda Dealer as soon as
possible. The system may not work in
an accident.
WARNING
!
Self-Servicing the SupplementalRestraint System:Self-servicing or tampering with
the supplemental restraint system
is dangerous. The air bags could
accidentally activate or become
disabled. This could cause serious
injuries. Never tamper with the
supplemental restraint system and
always have an Authorized Mazda
Dealer perform all servicing and
repairs.

053-49BE
 Immobilizer System
Warning/Security
Indicator Light*
 Immobilizer system warning light
When the key is in the ignition, this
light serves as the immobilizer system
warning light.
If the immobilizer system is working
properly, the light will come on when
the ignition is turned to the start
position. The light will go out when
the engine starts.

Form No. 8P95-EA-00G
Driving Your Mazda
5-85
76Y032-007AAudio sound adjustment
1. Press the audio control knob to select bass, mid-range, treble, fade
or balance control. The selected
function will be indicated.
NOTEAbout 5 seconds after selecting
any mode, the volume function
will be automatically selected. To
reset bass, treble, fade, and
balance, press and hold the audio
control knob for 2 seconds. The
unit will beep and “CL” will be
displayed.
76Y032-0082. Turn the audio control knob toadjust the selected function; bass,
mid-range, treble, fade or balance.

Form No. 8P95-EA-00G
Driving Your Mazda
5-89
J58PAU4032
NOTEIf the time is not adjusted while the
clock’s current time is flashing (if
neither the H nor M is pressed),
and the clock button is pressed a
second time, the minutes will be
set to 00. If the clock’ s current
time setting is within the latter part
of the hour (from 30 to 59 min),
the hour setting will automatically
advance one hour.
07L032–003 Changing the display mode
The display on the unit can be changed
by pressing the clock button. This
alternates the display between clock
and audio. When the clock mode has
been selected, the time will be
displayed.

Form No. 8P95-EA-00G
Driving Your Mazda5-90NOTEIf audio operation is selected while
the clock mode is on, selected
audio mode will be displayed for
10 seconds, then the display will
revert to the clock mode.
07L032–006
Operating the Radio
To operate the radio, turn the ignition
switch to the ACC or ON position. 
Radio ON
Press the AM or FM1/2 button to turn
the radio on.

Form No. 8P95-EA-00G
Driving Your Mazda
5-91
Band selection
Select AM by pressing the AM button
and FM1 or FM2 by pressing the
FM1/2 button.
The selected mode will be indicated.
If FM stereo is being received, “ST”
will be displayed.NOTEIf the FM broadcast signal
becomes weak, reception
automatically changes from
STEREO to MONO for reduced
noise, and the “ST” indicator will
go out.
 Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning.
The easiest way to tune stations is to
set them on preset channels.NOTEIf the power supply is interrupted
(fuse blows or the battery is
disconnected), the preset channels
will be canceled.
76Y032-008_a
Higher
frequency
Lower
frequency
Manual tuning
Turning the manual tuning knob will
change to a higher or lower frequency.

Form No. 8P95-EA-00G
*Some models.Driving Your Mazda
5-109

Operating the Compact Disc
(CD) Player*/In-Dash CD
Changer*
To operate the CD player/in-dash CD
changer, turn the ignition switch to the
ACC or ON position.
 Inserting the CD (CD player)
Insert the CD into the slot, label-side
up. The auto-loading mechanism will
set the CD and begin play. There will
be a short lapse before play begins
while the player reads the digital
signals on the CD.
The disc in indicator will illuminate
and the track number will be
displayed. 
Inserting the CD
(In-dash CD changer)
The CD must be label-side up when
inserting. The auto-loading
mechanism will set the CD and begin
play. There will be a short lapse before
play begins while the player reads the
digital signals on the CD.
The disc number and the track number
will be displayed.
NOTEA CD cannot be inserted while the
display reads “WAIT.” A beeping
sound can be heard during this
waiting time. Simultaneously
pressing the power/volume knob
and the load button for about 2
seconds will turn this beeping
sound ON or OFF.

Form No. 8P95-EA-00G
*Some models.Driving Your Mazda
5-117
NOTE•CDs will be ejected starting
with the one with the lowest
number.
• All CDs in the tray will be
ejected continuously.
• CDs can be ejected when the
ignition switch is off. Press and
hold the CD eject button for
about 2 seconds and all CDs
will eject.

Operating the CD Changer*
(Except In-Dash) with Controls
on the Main Audio Unit
The CD changer can be connected to
the main audio unit and operated by
the controls on the main unit.
Regarding operation of the CD
changer itself, please refer to the
instructions attached to the changer.NOTEOperating the CD changer is
generally the same as that of the
CD player except for the insert and
eject functions (pages
5-109—5-115).
76Y032-016
Disc down Disc up
 Disc search
Press the disc up button (
) to skip
forward to the beginning of the next
CD.
Press the disc down button (  ) to
skip back to the beginning of the
previous CD.