2001 LINCOLN CONTINENTAL clock

[x] Cancel search: clock

Page 7 of 224

LINCOLN CONTINENTAL 2001  Owners Manual Electronic sound
system controls*
(pg. 51)
Message Center
(pg. 14)Clock
(pg. 33)Audio system
(pg. 34)
Climate control system
(pg. 27) Heated seat control
(pg. 86)
Climate controls
(pg. 51)
*if equippe

Page 33 of 224

LINCOLN CONTINENTAL 2001  Owners Manual REAR WINDOW DEFROSTER
The rear defroster control is located
on the instrument panel.
Press the rear defroster control to
clear the rear window of thin ice
and fog.
²A small LED will illuminate when
t

Page 42 of 224

LINCOLN CONTINENTAL 2001  Owners Manual Dolbytnoise reduction is manufactured under license from Dolbyt
Laboratories Licensing Corporation. ªDolbytº and the double-D symbol
are trademarks of DolbytLaboratories Licensing Corporation.
Compr

Page 137 of 224

LINCOLN CONTINENTAL 2001  Owners Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment
Fuse Panel Description
5 10A Virtual Image Instrument Cluster, Lighting
Control Module (LCM RUN/START Sense),
Autolamp Light Sensor
6 10A Virtua

Page 138 of 224

LINCOLN CONTINENTAL 2001  Owners Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment
Fuse Panel Description
25 10A Lighting Control Module (LCM): Right
Headlamp
26 10A Virtual Image Instrument Cluster, EATC
Module
27 Ð Not Used

Page 142 of 224

LINCOLN CONTINENTAL 2001  Owners Manual 5. Loosen each wheel lug nut
one-half turn counterclockwise but
do not remove them until the wheel
is raised off the ground. Refer to
Anti-theft lug nutsfor information
on removing anti-theft lug nuts

Page 143 of 224

LINCOLN CONTINENTAL 2001  Owners Manual To lessen the risk of personal injury, do not put any part of your
body under the vehicle while changing a tire. Do not start the
engine when your vehicle is on the jack. The jack is only meant for
ch

Page 144 of 224

LINCOLN CONTINENTAL 2001  Owners Manual 3. Turn the wrench in a counterclockwise direction to remove the lug
nut.
To install the anti-theft lug nut:
1. Insert the key over the locking lug nut.
2. Place the lug nut wrench over the lug nut ke
Page:   1-8 9-16 next >