Page 98 of 504
INTERIOR EQUIPMENT
81
CLOCK
14E006a
The digital clock indicates the time with the ignition
key at the ªACCº or ªONº position. To reset the
hour, press the ªHº button. To reset the minutes,
press the ªMº button. To adjust the time to the
nearest hour, press the ª:00º button.
For example, if the ª:00º button is pressed when the time
is between 9:30 ± 9:59 or between 10:01 ± 10:29, the
time will change to 10:00.
With the tail lights on, the brightness of the time
indication will be reduced.
If the electrical power source has been disconnected
from the clock, the time display will automatically be set
to 1:00 (one o'clock).CIGARETTE LIGHTER ANDASHTRAY
Page 99 of 504
INTERIOR EQUIPMENT
82
14E060
Front cigarette lighter and ashtray
To use the cigarette lighter and ashtray, first push
against the ashtray cover. Then when the ashtray
opens out, press in the cigarette lighter. When it
becomes heated, it automatically pops out ready for
use.
Do not hold the cigarette lighter pressed in.
If the engine is not running, the ignition key must be in
the ªACCº position.
When finished with your cigarette, thoroughly extinguish
it in the ashtray to prevent other cigarette butts from
catching fire. After using the ashtray, push it back in
completely.
To remove the ashtray, just pull it up.
Use a Lexus genuine cigarette lighter or equivalent for
replacement.
Page 102 of 504
INTERIOR EQUIPMENT
85
The power outlet is designed for power supply for
car accessories.
The ignition key must be in the ªACCº or ªONº position
for the power outlet to be used.
NOTICE
To prevent the fuse from being blown, do not
use the electricity over the total vehiclecapacity of 12V/120W.
To prevent the battery from being discharged,do not use the power outlet longer thannecessary when the engine is not running.
Close the power outlet lid when the poweroutlet is not in use. Inserting a foreign objectother than the appropriate plug that fits theoutlet, or allowing any liquid into the outlet maycause electrical failure or short circuits.
GLOVE BOX
Page 130 of 504

EXTERIOR EQUIPMENT
11 3
15E022
1Lower 2Tilt up
To tilt up the rear end of the moon roof, push the
switch on the ªTILT UPº side or on the ªSLIDE
OPENº side to lower it.
To operate the moon roof, the ignition key must be in the
ªONº position.
Key off operation: Even if the ignition key is turned to
the ªACCº or ªLOCKº position, the moon roof can be
operated until a front door is opened (or for 43 seconds).
To tilt up the slide±opened moon roof:
Push the switch on the ªTILT UPº side to cl ose the moon
roof fully. After releasing the switch, push the switch on
the same side again.
Operating the moon roof from outside
the vehicle
The moon roof can be closed or opened using an ignition
key.
Insert the ignition key into the key hole on either
front door.
To close the moon roof: Turn the key in the locking
direction and hold it.
After the door is locked, the moon roof begins to close.
To stop in the middle, return the key.
To open the moon roof: Turn the key in the unlocking
direction and hold it.
After the door is unlocked, the moon roof begins to open.
To stop in the middle, return the key.
Page 132 of 504
EXTERIOR EQUIPMENT
11 5
Never leave small children alone in the vehicle,
especially with the ignition key still inserted. They
could use the moon roof switches and get trapped in
the roof opening. Unattended children can be
involved in serious accidents.
Never sit on top of the vehicle around the roof
opening.
Never try jamming any part of your body to make the
jam protection function work intentionally.
The jam protection function may not work if
something gets caught just before the moon roof
fully closed.
Page 152 of 504
COMFORT ADJUSTMENT
135
Adjust the m
irror so that you can just see the rear of
your vehicle in the mirror.
Pushing the switch changes the mode between
ªAUTOº and ªDAYº.
The indicator comes on when the ªAUTOº mode is
selected.
ªDAYº mode: The mirror surface is normal.
ªAUTOº mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror
surface darkens slightly to reduce the reflected
light.
When the inside rear view mirror surface changes, the
driver's side outside rear view mirror surface will also
become darker.
When the ignition key is inserted and turned on, the
inside rear view mirror always turns on in the ªAUTOº
mode. When the outside air temperature is low, it may take a
little longer for the mirror to darken in response to the
detection of headlights.
CAUTION
Do not adjust the mirror while the vehicle is moving. It
may cause the driver to mishandle the vehicle and an
accident may occur resulting in death or serious
injuries.
Page 165 of 504
COMFORT ADJUSTMENT
148
16E179
This indicator comes on when the ignition key is
turned to the ªACCº or ªONº position. It goes off
after about 6 seconds. This means the front seat belt
pretensioners are operating properly.
This warning light system monitors the airbag sensor
assembly, front airbag sensors, side airbag sensors,
front seat belt pretensioner assemblies, inflators,
warning light, interconnecting wiring and power sources.
(For details, see ªService reminder indicators and
warning buzzersº on page 60 for instructions.)
Page 168 of 504
COMFORT ADJUSTMENT
151
16E179
This front seat belt pretensioner system has a service
reminder indicator to inform the driver of operating
problems. If any of the following conditions occurs, this
indicates a malfunction of the airbags or pretensioners.
Contact your Lexus dealer as soon as possible to
service the vehicle.
The light does not come on when the ignition key is
turned to the ªACCº or ªONº position, or the light
remains on.
The light comes on or flashes while driving.
If either front seat belt does not retract or cannot be
pulled out due to a malfunction or activation of the
relevant front seat belt pretensioner.