Page 116 of 504
INTERIOR EQUIPMENT
99
LUGGAGE STOWAGEPRECAUTIONS
When stowing luggage or cargo in the vehicle,
observe the following:
Put luggage or cargo in the trunk when at all possible.
Be sure all items are secured in place.
Be careful to keep the vehicle level. Placing the
weight as far forward as possible helps maintain
vehicle balance.
For better fuel economy, do not carry unnecessary
weight.
CAUTION
Do not place anything on the package tray behind the
rear seatback. Such items may be thrown about and
possibly injure people in the vehicle during sudden
braking or an accident.
Do not drive with objects left on top of the instrument
panel. They may interfere with the driver's field of
view. Or they may move during sharp vehicle
acceleration or turning, and impair the driver's
control of the vehicle. In an accident they may injure
the vehicle occupants.
Page 119 of 504
EXTERIOR EQUIPMENT
102
HOOD
15E016
1. To open the hood, pull the hood lock release lever
under the instrument panel. The hood will spring up
slightly.
15E023
2. Insert your fingers under the hood, push up the
auxiliary catch lever and lift the hood.
Page 136 of 504
COMFORT ADJUSTMENT
11 9
Seat adjustment precautions
Adjust the driver's seat so that the foot pedals, steering
wheel and instrument panel controls are within easy
reach of the driver.
CAUTION
Do not adjust the seat while the vehicle is moving as
the seat may unexpectedly move and cause the
driver to lose control of the vehicle.
Be careful not to hit the seat against a passenger,
luggage or the rear seat.
NOTICE
Do not operate the control switch in more than
one dimension at a time. It may cause electricaloverload.
Adjusting front seats
Page 239 of 504
AIR CONDITIONING
222
20E096
The outlets from which air is delivered can be selected
manually by pushing the button. The function of each
mode is as follows:
1Panel ± Air flows mainly from the instrument panel
vents.
2 Bi±level ± Air flows from both the floor vents and
the instrument panel vents.
3 Floor ± Air flows mainly from the floor vents.
4Floor/Windshield ± Air flows mainly from the floor
vents and windshield vents. If quick heating or cooling is desired ±
Turn the ªTEMPº knob until ªMAX. HOTº or ªMAX.
COLDº appears on the display.
When the ªMAX. COLDº is selected, the air intake is
automatically set to RECIRCULATED AIR mode.
If manual fan speed control is desired ±
Page 250 of 504
AIR CONDITIONING
233
On some models, the air conditioning filters are
behind the central instrument panel.
The air conditioning filter may clog after long use. The
filter may need to be replaced if the air flow of the air
conditioner
and heater experiences extreme reductions
in operating efficiency, or if the windows become to fog
up easily.
To maintain the air conditioning efficiency, inspect and
replace the air conditioning filter according to the
maintenance schedule. (For scheduled maintenance
information, please refer to the ªOwner's Manual
Supplement/Maintenance Scheduleº.)
CAUTION
Be careful not to touch the hot heater radiator pipes.
20E208
Page 406 of 504
INTRODUCTION
389
The vehicle identification number (VIN) is the legal
identifier
for your vehicle. This number is on the left
top of the instrument panel and can be seen through
the windshield from outside.
This is the primary identification number for your Lexus.
It is used in registering the ownership of your vehicle.
32E001±1
The vehicle identification number (VIN) is also on the
Certification Label.
Page 462 of 504
ELECTRICAL COMPONENTS
445
1 2 3Engine compartment
4Driver's side instrument panel
± FUSES
64E025a
1Engine compartment
64E065
2Engine compartment
Page 464 of 504
64E067
ELECTRICAL COMPONENTS
447
3Engine compartment
4Driver's side instrument panel