CONTROL UNITS
86-3-2 REPAIRS
Central Control Unit (CCU)
$% 86.55.75
Remove
1.Disconnect battery earth lead.
2.Open drivers glove box lid and remove fuse box
cover.
3.Remove bolt securing fuse box mounting plate
to steering column bracket.
4.Remove 2 bolts securing mounting plate to
body.
5.Remove 2 bolts securing fuse box to mounting
plate.
6.Disconnect 3 multiplugs from CCU in rear of
fuse box.
CONTROL UNITS
REPAIRS 86-3-3
7.Manoeuvre fuse box to gain access to CCU.
8.Release retaining clips and remove CCU.
Refit
1.Position CCU and secure in clips.
2.Align fuse box to mounting plate.
3.Connect multiplugs to CCU.
4.Fit bolts securing fuse box to mounting bracket
and tighten to 8 Nm (6 lbf.ft).
5.Position mounting plate and tighten bolts to 8
Nm (6 lbf.ft).
6.Fit fuse box cover.
7.Close glove box.
8.Connect battery earth lead.
Control Unit - power fold mirrors - up to
02MY
$% 86.54.30
CAUTION: If the power fold mirrors are operated
consecutively more than three times, then they
will cease to function for a period of one minute.
This is to prevent damage to the power fold
mirror motors.
Remove
1.Remove the front console.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
2.Release the two clips securing the power fold
mirror control unit.
3.Release the control unit from its mounting and
disconnect the multiplug.
4.Remove the control unit.
Refit
1.Locate the control unit in its mounting and
ensure the clips are fully engaged.
2.Connect the multiplug to the control unit.
3.Fit the front console.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
M86 5689
HARNESSES
REPAIRS 86-7-1
HARNESSES REPAIRS
Fuse box - passenger compartment
$% 86.70.01
Remove
1.Disconnect battery earth lead.
2.Open glove box.
3.Remove hinge pins and lid.
4.Remove fuse box cover.
5.Remove relays from fuse box mounting plate.
6.Remove bolt securing fuse box mounting plate
to steering column bracket.
7.Remove 2 bolts securing mounting plate to
body.
8.Remove 2 bolts securing fuse box to mounting
plate.
9.Disconnect 3 multiplugs from CCU in rear of
fuse box.
10.Release fusebox and disconnect 8 multiplugs.
11.Remove fusebox.
12.Remove fuses and relays from fuse box.Refit
1.Identify and fit fuses.
2.Fit relays.
3.Fit fuse box.
4.Connect multiplugs to fusebox.
5.Connect multiplugs to CCU.
6.Fit bolts securing fuse box to mounting plate
and tighten to 8 Nm (6 lbf.ft).
7.Fit bolts securing fuse box mounting plate to
body and tighten to 8 Nm (6 lbf.ft).
8.Fit relays to mounting plate.
9.Fit fuse box cover.
10.Fit glove box lid and hinge pins.
11.Close lid.
12.Connect battery earth lead.
