Page 160 of 191
157
G
WEIGHTS
Weights (kg)
Kerb weight
(including fuel, spare, tools and accessories):
Payload (1) including the driver:
Maximum loads permitted (2)
– front axle:
– rear axle:
– total:
Maximum load on the roof (3):
Towable weight
– trailer with brakes:
– trailer without brakes:
Maximum load on the ball joint
(trailer with brakes):1.2
16V
910
480
750
750
1390
50
900
400
70 1.2
860
470
750
750
1330
50
900
400
70
(1) If special equipment is fitted (sunroof, air conditioner, tow hitch etc.) the unladen weight increases, thus reducing the payload as specified in the max-
imum loads allowed.
(2) Loads not to be exceeded: the driver must arrange the goods in the boot and/or load surface so that they comply with these limits.
(3) Including the weight of the roof rack.
4C144-167 ING 11-03-2008 12:02 Pagina 157
Page 175 of 191
172
G
ELECTRICAL CONNECTION
DIAGRAM (fig. 4)
1- Connection on the branching box
for powering the relays
2- Terminal box
3- Left taillight
4- Relay for the power supply of the
trailer’s left-hand direction indicator
5- Relay for the power supply of the
trailer’s right-hand direction indicator
6- Right taillight
7- 7-pole socket
8- Rear left grounding point
9- Connection between dashboard
cables and rear cables
10- 7.5A fuse
List of cable colour codes
B=White - G- Yellow - L=Blue- M=Brown- N=Black- R=Red- V=Green
TOW HITCH
fig. 4
P4C00170
4C168-176 ING 11-03-2008 12:03 Pagina 172
Page 176 of 191

173
G
For mechanical connections, the fol-
lowing must be used:
– “CUNA 501” 1
stclass ball coupling
(CUNA NC 138-40 table);
– “CUNA 501” 1
stclass socket cou-
pling (CUNA NC 438-40 table).For the electric connection a 7-pole,
12 Volt coupling must be used
(CUNA UNI 9128).
The electric coupling must be fixed
on a special mount to be attached to
the ball coupling.
The electrical functions for the cou-
pling must be connected as illustrated
in(fig. 5).
In addition to the electrical connec-
tions (illustrated in the diagram that
follows), only the lead for powering
an electric brake and the lead to
power a light inside the trailer not ex-
ceeding 15W may be connected to the
car’s electrical system.
The electric brake must be powered
directly from the battery by means of
a lead with a cross-section no less
than 2.5 sq. mm.
Location of the components
on the car:
1.Left taillight (rear foglight con-
nection) - 2.Right taillight (brake
lights connection) - 3.Pole socket -
4.Trailer direction indicators power
supply relays - 5.High-amp fusebox
-6.Branching box. TOW HITCH INSTALLATION
(fig. 5)
The tow hitch must be fixed to the
body by an expert in accordance with
the following instructions and with
any additional instructions or infor-
mation provided by the tow hitch
manufacturer.
fig. 5
P4C00416
4C168-176 ING 11-03-2008 12:03 Pagina 173
Page 183 of 191

180
fdG
Three-way catalytic converter . 4
Tools ....................................... 96
Top speeds .............................. 156
Towing a trailer
– tow hitch installation ... 172-174
– warnings .......................... 84
Towing the car ........................ 116
Transmission ratios ................. 150
Transporting children in safety 26
Tyre pressure .............. 74-136-163
Tyres...................... 74-94-136-153
Useful accessories .................. 89
Ventilation ........................... 39
Warning lights
– ABS anti-locking system
failure................................ 35
– airbag failure ..................... 34
– brake light failure .............. 36
– direction indicators ............ 36
– doors not closed properly ... 34
– EOBD self-diagnostic
system ............................... 35
– external lights .................... 36
– handbrake on ................... 34
– hazard lights...................... 35
– Lancia CODE ................... 35
– low battery recharging ....... 34
– low brake fluid .................. 34Warning lights
– low engine oil pressure....... 34
Warning lights
– main beam headlights........ 36
– passenger airbag off .......... 36
Washer fluid level.................... 129
Washer nozzles ........................ 139
Weights ................................... 157
Wheel
– replacing a wheel ............... 94
– spare ........................... 96-154
Wheel geometry (toe-in) ......... 155
Wheel rims .............................. 153
Windows (cleaning )................ 142
Windows (rear) ....................... 47
Windscreen washer
– control .............................. 42
– fluid level ......................... 129
Windscreen wiper
– control ............................. 42
– blades ................................ 138
Windscreen wiper
– nozzles............................... 139
Wiper blades ........................... 138
4C177-184 Indice ING 13-03-2008 13:31 Pagina 180