2001 Lancia Ypsilon engine

[x] Cancel search: engine

Page 22 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 19
G
ACCESS TO THE BACK SEATS
(fig. 10)
You can easily get into the back
seats from either side.
Pull handle Aup to fold the seat
back down and slide the seat forwards
(only for the passenger seat).
A

Page 32 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 29
G
INSTRUMENT PANEL
1.216VM NblueVERSION
A- Fuel gauge with reserve warning
light.
C- Speedometer.
D- Engine coolant temperature
gauge with high temperature warning
light.
E- Clock.
G- Odometer and

Page 33 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 30
G
LS-LX VERSIONS
A- Fuel gauge with reserve warning
light.
B- Rev counter.
C- Speedometer.
D- Engine coolant temperature gauge
with high temperature warning light.
E- Clock.
F- Outside temperature

Page 34 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 31
G
INSTRUMENTS
SPEEDOMETER (fig. 31)ODOMETER AND TRIP
METER
For LS-LX - 1.216VM M Nredver-
sions(fig. 32)
A- Odometer.
B- Trip meter.
Press “Reset” button C (fig. 36)to
reset.
For the 1.2
16VM N

Page 35 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 32
G
CLOCK
Press control A (fig. 36)to adjust the
hour.
Press control Bto adjust the minutes.
Each time one of the control buttons
is pressed, the hours (A) or the min-
utes (B) will move forwards one

Page 36 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 33
G
REV COUNTER (fig. 39)
If the needle is in the red zone it
shows your car’s engine is over-
revving. This is only acceptable for a
few moments.
IMPORTANTThe electronic injec-
tion control system

Page 37 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 34
G
WARNING LIGHTS 
The warning lights will come on in
the following cases:
LOW ENGINE
OIL PRESSURE (red)
When the pressure of the
engine oil falls below the normal level.
When the key is turned to M

Page 38 of 191

Lancia Ypsilon 2001  Owner handbook (in English) 35
G
LANCIA CODE 
(amber)
In three ways (with ignition
key at MAR):
1.A single flash - indicates that the
key code has been recognised. The en-
gine can be started.
2.A constant light - indicates that
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 80 next >