2001 HONDA CIVIC SEDAN engine coolant

µµ
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ì
Ì
Î
Ì
Î
Ì
Maint enance197
U.S. Owners
Canadian Owners A
B
C
D
E
Service at the indicated distance or time, whichever comes first.
Refer to page to determine which schedule to use.Use the Maintenance Schedule for Severe Conditions.
10,000 mil/16,000 km/1 yr
20,000 mil/32,000 km/1 yr
30,000 mil/48,000 km/2 yrs
40,000 mil/64,000 km/2 yrs
50,000 mil/80,000 km/3 yrs
60,000 mil/96,000 km/3 yrs
70,000 mil/112,000 km/4 yrs
80,000 mil/128,000 km/4 yrs
90,000 mil/144,000 km/5 yrs
100,000 mil/160,000 km/5 yrs
110,000 mil/176,000 km
110,000 mil/176,000 km/6 yrs
110,000 mil/176,000 km/7 yrs
120,000 mil/192,000 km/6 yrs
120,000 mil/192,000 km/10 yrs Replace engine oil.
Rotate tires (follow pattern on page
237).
Replace engine oil filter.
Inspect front and rear brakes.
Check parking brake adjustment.
Inspect tie rod ends, steering gear box and boots.
Inspect suspension components.
Inspect driveshaft boots.
Inspect brake hoses and lines (including ABS).
Check all fluid levels, condition of fluids, and check
for leaks.
Inspect cooling system hoses and connections. Inspect exhaust system.
Inspect fuel lines and connections.
Inspect and adjust drive belts.
Replace air conditioning filter .
Replace air cleaner element every 30,000 mi/48,000
km (independent of time).
Replace brake fluid every 3 years (independent of
mileage).
Do items in A.
Do items in A, B.
DoitemsinA,C,D.
Do items in A, B.
Do items in A, E.
DoitemsinA,B,C,D.
Do items in A.
Do items in A, B.
DoitemsinA,C,D.
Do items in A, B.
Inspect valve clearance, cold engine.
Replace spark plugs.
Do items in A, E. Replace timing belt, inspect water pump.Inspect idle speed.
Replace transmission fluid (MT, AT).
DoitemsinA,B,C,D. Replace engine coolant.
194
1
See information on maintenance and emissions warranty, last
column, page . See air conditioning filter on page for replacement information
under special driving conditions.
Check engine oil and coolant at each fuel stop.
Check and adjust valve clearance, cold engine, if noisy.
NOTE: 1:
: 231
195
Maintenance Schedule for Normal Conditions (listed by distance/time)

µ
Î
Î
Ì
ÌÌÎ
ÌÎ
Ì
Maint enance198
Service at the indicated distance or time whichever comes first. miles x 1,000
km x 1,000
months Replace every 5,000 miles (8,000 km) or 6 months
Service the following items at the recommended intervals
Every 36 months
At 120,000 miles (192,000 km) or 120 months,
then every 60,000 miles (96,000 km) or 60 months Every 110,000 miles (176,000 km) or 84 months
Inspect every 110,000 miles (176,000 km), otherwise adjust only if noisy Every 110,000 miles (176,000 km)
Every 15,000 miles (24,000 km) in dusty conditions,
otherwise use normal schedule
10
16
20
3230
4840
6450
8060
9670
112 80
128 90
144 100
160110
176120
192
See information on maintenance and emissions warranty, last column, page . See air conditioning filter on page for replacement information under special driving conditions.
See timing belt on page to determine need for replacement.
Replace engine oil and filter
Rotate tires (Check tire inflation and condition at least once per month)
Inspect front and rear brakes
Lubricate locks and hinges
Visually inspect the following items:
Tie rod ends, steering gear box and boots, Suspension components
Driveshaft boots
Check parking brake adjustment
Visually inspect the following items: Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Cooling system hoses and connectionsExhaust system, Fuel lines and connections
Lights and controls, Vehicle underbody
Inspect and adjust drive belts
Replace air conditioning filter
Replace transmission fluid
Replace air cleaner element
Replace spark plugs
Inspect valve clearance Replace timing belt , and inspect water pump
Inspect idle speed
Replace engine coolant
Replace brake fluid 24
4872
12 3660
MT
AT
1:
2: : 231
233 195
1
2
Maintenance Schedule for Severe Conditions

Ø
Ø
Ø
Ø
Ø
Ø
ÌÎ
Ì
Î
Î
Ì
Maint enance200
See timing belt on page to determine need for replacement.
Check engine oil and coolant at each fuel stop.
Check and adjust valve clearance, cold engine, if noisy. See information on maintenance and emissions warranty, last
column, page . See air conditioning filter on page for replacement information
under special driving conditions.
NOTE: 1:
2:
: 231
233
195
95,000 mi/152,000 km/5-½ yrs
100,000 mi/160,000 km/5 yrs
105,000 mi/168,000 km/6 yrs
110,000 mi/176,000 km
110,000 mi/176,000 km/6 yrs
110,000 mi/176,000 km/7 yrs
115,000 mi/184,000 km/6-½ yrs
120,000 mi/192,000 km/6 yrs
120,000 mi/192,000 km/10 yrs Do items in A.
DoitemsinA,B,C.
DoitemsinA,E,F
Inspect valve clearance, cold engine.
Replace spark plugs.
Do items in A, B. Replace timing belt , inspect water pump.
Inspect idle speed.
Do items in A. Replace transmission fluid (MT, AT).
DoitemsinA,B,C,D,E. Replace engine coolant.
2
Maintenance Schedule for Severe Conditions (listed by distance/time)

µµµ µ
µ
µ
µ
Engine oil level Check every
time you fill the fuel tank. See
page .
Engine coolant level Check the
radiator reserve tank every time
youfillthefueltank.Seepage .
Windshield washer f luid Check
the level in the reservoir monthly.
If weather conditions cause you to
use the washers f requently, check
the reservoir each time you stop
f or f uel. See page .
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are unsure of how to perf orm
any check, turn to the page given.
Lights Check the operation of
the headlights, parking lights,
taillights, high-mount brake light,
turn signals, brake lights, and
license plate lights monthly. See
page . Tires Check the tire pressure
monthly. Examine the tread f or
wear and foreign objects. See page.
Automatic transmission Check
the f luid level monthly. See page .
Brakes Check the f luid level
monthly. See page . 164
165
215
216 218 234
241
Owner Maintenance Checks
Maint enance203

If the coolant level in the reserve
tank is at or below the MIN line, add
coolant to bring it up to the MAX line.
Inspect the cooling system f or leaks.
This coolant should always be a
mixtureof 50percentantifreezeand
50 percent water. Never add straight
antif reeze or plain water.If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
Make sure the engine and radiator
are cool.
This coolant is pre-mixed with 50
percent antif reeze and 50 percent
water. It does not require any
additional mixing. If it is not available,
you may use another major-brand
non-silicate coolant as a temporary
replacement. Make sure it is a high-
quality coolant recommended f or
aluminum engines. However,
continued use of any non-Honda
coolant can result in corrosion,
causing the cooling system to
malf unction or f ail. Have the cooling
system f lushed and ref illed with
Honda antif reeze/coolant as soon as
possible. Always use genuine Honda All
Season Antif reeze/Coolant Type 2.
1.
CONT INUED
A dding Engine Coolant
Cooling Syst em
Maint enance209
R REES
SE ER
RV V E
E T
TA
A N
NK K
Removing the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.

Remove the radiator cap by
pushing down and turning
counterclockwise. Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.Pour coolant into the reserve tank.
Fill it to half way between the MAX
and MIN marks. Put the cap back
on the reserve tank. Put the radiator cap back on.
Tighten it f ully. The coolant level should be up to
the base of the f iller neck. Add
coolant if it is low.Do not add any rust inhibitors or
other additives to your car’s cooling
system. They may not be compatible
with the coolant or engine compo-
nents.
2.
3. 4.
5.
6.
Cooling Syst em
Maint enance210
R RA
A D
DI
IAA T
TO
OR R C
CAA P
P R
RE
ES
SE ER
RV V E
E T
TA
A N
NK K

CONT INUED
Remove the radiator cap. Turn the ignition ON (II). Turn
the temperature control dial to
maximum heat. Turn of f the
ignition. Open the hood. Make
sure the engine and radiator are
cool to the touch.Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Remove the drain
bolt and washer f rom the engine
block.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled mechanic. Thecoolingsystemshouldbe
completely drained and ref illed with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
genuine Honda All Season
Antif reeze/Coolant Type 2.
1.3.
2.
Replacing Engine Coolant
Cooling Syst em
Maint enance211

Tightening torque: When the coolant stops draining,
tightenthedrainpluginthe
bottom of the radiator. Apply non-
hardening sealant to the drain bolt
threads, put a new washer on the
drain bolt, and reinstall the drain
bolt in the engine block. Tighten it
securely.Pour genuine Honda All Season
Antif reeze/Coolant Type 2 into
the radiator up to the base of the
f iller neck. This coolant is a
mixture of 50 percent antif reeze
and 50 percent water. Pre-mixing
is not required.The cooling system capacity is:
10.
11.
CONT INUED
With 5-speed manual transmission:With automatic transmission:
Cooling Syst em
Maint enance213
F FIILLL LEE R
R N
NEEC
CK K
F
Fi illll u
u p
p t
too h
he
erree
58 lbf·ft (78 N·m , 8.0 kgf·m) 1.03 US gal (3.9
, 0.86 Imp gal)
1.00 US gal (3.8
, 0.84 Imp gal)