2001 HONDA ACCORD radio

[x] Cancel search: radio

Page 158 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual Radio signals, especially on the FM 
band, are def lected by large objects
such as buildings and hills. Your
radio then receives both the direct
signal f rom the station’s transmitter,
and the def l

Page 159 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual Û
The ignition switch must be in 
ACCESSORY (I) or ON (II).
Make sure the tape opening on the
cassette is facing to the right, then
insert the cassette most of the way
into the slot. The system will

Page 164 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual CONT INUED
To load the CDs or operate the CD 
changer, the ignition switch must be
in ACCESSORY (I) or ON (II). 
Load and play only standard round 
discs. Odd-shaped CDs may jam in
the drive or cause

Page 172 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual ÛÝ
The top and bottom buttons adjust 
thevolumeup( )ordown( ).
Press the proper button and hold it
until the desired volume is reached,
then release it. 
The AUDIO/CH button has three 
f unctions,

Page 173 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual You will have to store your favorite 
stations in the Preset buttons after
the system begins working. Your
original settings were lost when
power was disconnected.
If your car’s battery is disconnec

Page 174 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual Once the security system is set, 
opening any door (without using the
key or the remote transmitter), or
the hood, will cause it to alarm. It
also alarms if the radio is removed
f rom the dashboard or

Page 185 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual Be sure electronic accessories do 
not overload electrical circuits
(see page ). 
Have the installer contact your 
Honda dealer f or assistance bef ore
installing any electronic accessory.
If possible

Page 261 of 355

HONDA ACCORD 2001 CF / 6.G Owners Manual If your car’s battery is disconnected 
or goes dead, the audio system will
disableitself.Thenexttimeyouturn
on the radio you will see ‘‘Code’’ in
the f requency display. Use the
Preset butto
Page:   < prev 1-8 9-16 17-24 25-32 next >