2001 GMC YUKON XL DENALI display

[x] Cancel search: display

Page 158 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-71
If the transmission fluid reaches temperatures of
approximately 275F (135C) or greater, the message
center will display a TRANS HOT...IDLE ENG warning
message. Pull the vehicle off the roadway

Page 163 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-76 Cruise Light
United States Canada
The CRUISE light comes on whenever you set your
cruise control. See ªCruise Controlº in the Index.
Tow/Haul Light
This light is displayed 
when the tow/haul mo

Page 164 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-77
Here are some situations you may experience with your
fuel gage. None of these indicate a problem with the 
fuel gage.
At the gas station, the fuel pump shuts off before the
gage reads full.
It

Page 165 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-78 Trans Fluid Hot
Your vehicle has a transmission temperature warning
display contained in the message center.
If the transmission fluid
temperature becomes high,
the message center will
display th

Page 166 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-79 Trans Hot...Idle Engine
Your vehicle has a transmission over-temperature
display contained in the message center.
If this warning message is
displayed, pull the vehicle
off the roadway when it is

Page 167 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-80 Low Coolant
This message is displayed
when the cooling system is
low on coolant.
The engine may overheat. See ªEngine Coolantº in the
Index and have your vehicle serviced as soon as you can.
Ch

Page 168 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-81 Check Eng Oil Pressure
This message is displayed
when the engine oil pressure
is low.
See ªOil Pressure Gageº in the Index for 
more information.
Check Eng Oil Level
This message is displayed
w

Page 169 of 394

GMC YUKON XL DENALI 2001  Owners Manual 2-82 Change Engine Oil
This message is displayed
when the engine oil needs 
to be changed. The message
is only displayed for
15 seconds at the start of
each ignition cycle.
When you change the engine